Unigo 7006 Cover Kit 2 with GPS
Cable T / min, Sensor T ° Water, Connection cable, Battery box (6x AA)
Cable T / min, Sensor T ° Water, Connection cable, Battery box (6x AA)
Reference system in competition karting and evolution of Unipro 6003 and then from the UNIGO 6005 having made the success of the brand, theUnigo laptimer 7006 Allows recording and real-time display of your embedded data.
All The devices of the Unigo series are compatible, including those of previous versions.
The improvement made are notable on this new version!
- Wireless data transfer (WiFi, Bluetouth, NFC, ...)
- Increased GPS system accuracy
- IMU sensor integrated into the GPS antenna: 3D plotted
- Audio Feedback
- Weather data: Hygrometry & atmospheric pressure
- and many other improvements (see commercial brochure in attachment)
GPS Tracking / Timing by Sector / Engine Settings / Settings frame, the system Unipro offers a wide range of possibilities from this evolutionary kit.
The data can then be exploited either directly on the display or extracted and exploited on a PC or Mac equipped with the software Unipro (USB or wireless interface).
The GPS antenna integrates complementary sensors: accelerometer / gyroscope (steering wheel position) + ATM hygrometry / pressure. (air tunnel) + IMU sensor (3D).
Laptimer Unigo 7006 Available in 3 Starting configurations:
- Kit 1 (incl. GPS module, RPM cable, power cable and AA battery holder)
This base allows the measurement of time to the lap and engine speed, the operation of sectors, the temperature monitoring of the cooling circuit, obtaining the climatic data, the precise statement of the trajectories combined with the steering wheel position. Data Analysis Software provided: Off Camber Data for PC or Mac.
- Kit 2 (incl. GPS module, RPM cable, power cable, AA battery holder and water temperature sensor)
Added on this kit a temperature sensor for the liquid cooling circuit.
- Kit 3 (incl. GPS module, RPM cable, power cable, sensor splitter, water temperature and exhaust sensor, LIPO batter and charger)
Added to this two probes for measuring water and exhaust temperatures and a sensor dispatcher (splitter). The battery holder is replaced by a Lipo battery and charger.
* Data transfer cable and non-supplied AA batteries.
Other sensors can be connected to the central unit in addition to this basic kit to make your system Unipro more perfected. For more information, please consult our range of sensors for Unipro.
Possibilities of evolution:
- Rechargeable battery
- Sensor speed wheels before
- Rear wheel speed sensor
- Cylinder head temperature sensor
- Exhaust temperature sensor
- Angle sensor of gas pedals & brake
Terms of Service
In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION
In the following :
The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.
The Buyer designates the Seller's customers, whether they act as a professional or an individual.
Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE
These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.
They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").
In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.
Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.
The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.
Article 3: SPECIAL CONDITIONS OF SALE
The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS
4.1. Product Features
The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.
4.2. Availability
The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.
The Seller reserves the right, at any time, to delete or modify a Product, without notice.
In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.
In the event of total or partial cancellation of the order:
- The order of the Buyer will be validated and his bank account will be debited for the entire order;
- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;
- The Buyer will be delivered Products available;
- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.
In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.
Here is the rule 2 content
Here is the rule 3 content