Special Squich Squich Wire Ø2mm

€10.10
  Tax included
Reference: D045

The special Squish wire squeth Ø2mm is essential to set the squish on the 2-stroke engines. This setting optimizes the compression and performance of the engine. A poorly set squish can result in piston holes or loss of performance. The process requires a tin thread, a slide foot, shims, and patience to mount and disassemble the high engine. Follow the jacks, measurement, and squish setting steps for optimal performance.


 The product is in your cart now
Waiting...
Unable to Add to cart
  In stock

Special Squish Wire Squish Ø2mm for Karting

Diameter: 2 mm

The Special Squish wire squish Ø2mm is an essential tool for setting the squish on the 2-time karting motors. Here is a detailed description of its use and its importance:

  • What is the squish?

    • The squish is a crucial motor adjustment for 2-stroke engines. It consists of adjusting the distance between the piston and the cylinder head to optimize the compression and performance of the engine. Correct squish setting is essential for the life and performance of your engine kit.
  • Importance of the squish setting:

    • A poorly adjusted squish can cause serious problems such as piston drilling if the squish is too small, or a loss of compression and performance if the subih is too big.
  • Materials needed:

    • Tin wire of 1 mm (or 2 mm for more precision)
    • Sliding foot (electronic or manual)
    • Set of shims of different sizes to place under the cylinder (supplied in high-end kits)
    • Courage and patience to mount and disassemble the high engine
  • Squish setting steps:

    1. Taken of the squish without bilge:

      • Complete the high engine completely with only the base seal under the cylinder.
      • Fold a piece of tin thread (about 10 cm in length) in the shape of "L".
      • Pass the thread by the well of the bougie And orient it so that the end of the thread is between the piston and the cylinder head.
      • Rotate the crankshaft (using the ignition bell, the internal rotor, or giving kick shots).
    2. SUISH measurement:

      • Remove the tin wire and measure the overwritten part with a slide foot.
      • The resulting result must be in tenth millimeter (for example, 0.2 mm).
    3. Squish setting:

      • If you get a 0.2 mm measurement and want a 0.6 mm squish, add a 0.4mm bilge between the cylinder and low engine.
      • Use the holders supplied with the kit to adjust the necessary thickness.
      • Reassemble the high engine with the necessary holds (selected beforehand) and redone the same manipulation as in the first step.
      • You should then get a crushed tin thread of 0.6 mm if you have done your measurements well.
      • So here you are with a squish set, more than starting!

The special Squish wire squeth Ø2mm is an indispensable tool for karting drivers that are keen to keep their engine in perfect condition. Its use makes it possible to optimize compression and ensure a long life of the engine, while improving the performance on the track.

Resume

The special Squish wire squeth Ø2mm is essential to set the squish on the 2-stroke engines. This setting optimizes the compression and performance of the engine. A poorly set squish can result in piston holes or loss of performance. The process requires a tin thread, a slide foot, shims, and patience to mount and disassemble the high engine. Follow the jacks, measurement, and squish setting steps for optimal performance.

D045
2 Items

In the same category

This website uses cookies to ensure you get the best experience on our website.Learn more about cookies

User Area

Guest

Login/Register

Forgot your password?

Languages

Currencies

Languages

Currencies

My Cart

Your Cart is Empty
Cart 

Menu

Search

Our Terms

Terms of Service

In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION

In the following :

The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.

The Buyer designates the Seller's customers, whether they act as a professional or an individual.

 

Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE

These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.

They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").

In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.

Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.

The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.

 
Article 3: SPECIAL CONDITIONS OF SALE

The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.

 
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS

4.1. Product Features

The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.

4.2. Availability

The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.

The Seller reserves the right, at any time, to delete or modify a Product, without notice.

In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.

In the event of total or partial cancellation of the order:

- The order of the Buyer will be validated and his bank account will be debited for the entire order;

- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;

- The Buyer will be delivered Products available;

- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.

In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.

Rule 2

Here is the rule 2 content

Rule 3

Here is the rule 3 content