OTK

Column spacer Ø10mm OTK

€4.44
  Tax included
Reference: 0017.001

The spacer of ø10mm is placed on the axis of the steering column, usually between the attachment tab of the rods and the centering rings.

  • Height adjustment: It allows to mount or down the position of the steering wheel to adapt to the morphology of the driver (arm length).

  • Geometry of the rods: Its most technical role is to maintain the horizontality of the leadership rods. A bad stacking of spacers can create "bump steer" (the direction that opens or closes alone when the chassis works in torsion).


 The product is in your cart now
Waiting...
Unable to Add to cart
  In stock

Summary: Precision and ergonomics

The spacer of ø10mm is placed on the axis of the steering column, usually between the attachment tab of the rods and the centering rings.

  • Height adjustment: It allows to mount or down the position of the steering wheel to adapt to the morphology of the driver (arm length).

  • Geometry of the rods: Its most technical role is to maintain the horizontality of the leadership rods. A bad stacking of spacers can create "bump steer" (the direction that opens or closes alone when the chassis works in torsion).


- Technical specifications

Feature Specification
Mark OTK (Original Spare Parts)
Internal diameter 10 mm (precise adjustment on the axis)
Thickness 10 mm
Material High quality aluminum (anodized or natural finish)
Compatibility Tony Kart, Kosmic, vice, redspeed, gilliard

- Mounting tutorial: Perfect alignment

  1. Verification of the axis: Before putting on the spacer, make sure the axis of the column is not marked or twisted. The spacer must slide effortlessly.

  2. Mounting order: If you use multiple spacers (eg one of 5mm and one of 10mm), always place the thick where the mechanical effort is most important to ensure better stability.

  3. Symmetry: If you change the height to compensate for a rod angle, make sure the two rods (left and right) work with the same angle with the column.

  4. Tightening: Do not tighten the column nut like a brute. The spacer must be held firmly, but the column must be able to pivot freely without hard point.


💡 Michel's trick

"We often use this 10mm spacer to mount the steering wheel when you have a big driver. The trick: Pay attention, the more you go up the steering wheel with spacers, the more you increase the lever arm on the column. My Pro Council: If you need more than 20mm spacers, check that the Nylstop nut at the end of the column takes on all its net. Security above all: a steering wheel that stays in your hands because the nut jumped, it's not ideal for taking the rope! "


❓ FAQ SEO (Frequently Asked Questions)

Q: Can we stack several 10mm spacers?

A: Yes, it's current to adjust the driving position. However, make sure that the length of the column axis is sufficient to engage the safety nut.

Q: Is it compatible with other brands (CRG, Birel)?

A: If the axis is 10mm, it will rise. But the spacers OTK are specifically machined to align with the Tony Kart steering bear design.

Q: Why is my spacer marked?

A: If you see circular marks, it's because your column has play and the spacer rubs abnormally. Check your teflon column rings.

0017.001
5 Items

In the same category

€20.40
clutch lever
Success 
Unable to Add to cart
Waiting...
This website uses cookies to ensure you get the best experience on our website.Learn more about cookies

User Area

Guest

Login/Register

Forgot your password?

Languages

Currencies

Languages

Currencies

My Cart

Your Cart is Empty
Cart 

Menu

Search

Our Terms

Terms of Service

In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION

In the following :

The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.

The Buyer designates the Seller's customers, whether they act as a professional or an individual.

 

Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE

These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.

They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").

In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.

Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.

The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.

 
Article 3: SPECIAL CONDITIONS OF SALE

The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.

 
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS

4.1. Product Features

The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.

4.2. Availability

The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.

The Seller reserves the right, at any time, to delete or modify a Product, without notice.

In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.

In the event of total or partial cancellation of the order:

- The order of the Buyer will be validated and his bank account will be debited for the entire order;

- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;

- The Buyer will be delivered Products available;

- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.

In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.

Rule 2

Here is the rule 2 content

Rule 3

Here is the rule 3 content