Français
English
Deutsch
Espagnol
Italiano
Portuguès
ελληνικά
No reward points for this product.
The Circlip Birelart is a critical safety piece for your braking system. Its role is to lock the axis that crosses the brake pads inside the stirrup. Without it, the intense vibrations of karting could slide the axis, resulting in the loss of the pads and a total braking failure.
Made of high quality spring steel, this "wire" circlip has a calibrated voltage to stay lodged in the throat of the axis, even under the most severe constraints encountered in competition.
-Why choose the circlip of origin Birelart?
-
High performance steel: Excellent shape memory to ensure that the clip does not open over time.
-
Specific dimensions: Diameter $ 10 \ Times $ 12 mm with a thread of $ 1 $ mm, perfectly adapted to the brackets of the Birelart range, Ricciardo and Charles Leclerc.
-
Thermal resistance: Do not lose its voltage despite the heat shown by the pads and the disc during the braking pressed.
-
Certified security: Room complies with the editing of origin manufacturer for total peace of mind on the track.
💡 Michel's trick
"In karting, it is often the smallest pieces that cause the biggest worries! My Pro Council: Never reuse a circlip that has been distorted during disassembly. The trick: At the pose, make sure you hear the 'click' that confirms that it is well housed in the groove of the axis. Warning: A circlip, it jumps fast! Always keep 4 or 5 in advance in your toolbox, because it is the room that is always losing in the grass or in the gravel of the paddock when changing the pads. "
- Mounting & Maintenance Guide
-
Installation: Use a fine clamp to slightly spread the circlip and slide it to the axis. Do not spread it more than necessary to avoid altering its tension.
-
Verification: Once in place, rotate the circlip by hand in his throat; He must turn freely while remaining firmly hanging.
-
Replacement: To change as soon as you see a trace of rust or if the circlip seems "loose" on the axis.
- Technical specifications
-
Brand: Birelart (Italy).
-
Dimensions: $ \ varnothing $ $ 10 \ Times $ 12 mm.
-
Thread diameter: $ 1 $ mm.
-
Application: Maintaining the brake plate axis.
-
Compatibility: Birelart Chassis, Ricciardo Kart, Charles Leclerc Kart.
❓ FAQ SEO (Frequently Asked Questions)
Q: Is this circlip sold to the unit?
A: Yes, but it is strongly advised to order them by lot of 4 to equip your two stirrups (or have help).
Q: Is it compatible with the calipers other brands (OTK, Sodi)?
A: Although the dimensions may appear near, each manufacturer uses specific axes. We recommend using the original room corresponding to the mark of your stirrup.
✅ Why buy at Magickart?
-
Original parts: The insurance of mounting material in accordance with the Birelart catalog.
-
Security above all: We are not kidding with the braking system components.
-
Fast shipping: All your small supplies sent immediately for your next race.
20.13165.06
2 Items
Specific References
The Circlip Birelart is a critical safety piece for your braking system. Its role is to lock the axis that crosses the brake pads inside the stirrup. Without it, the intense vibrations of karting could slide the axis, resulting in the loss of the pads and a total braking failure.
Made of high quality spring steel, this "wire" circlip has a calibrated voltage to stay lodged in the throat of the axis, even under the most severe constraints encountered in competition.