Why choose the version 28 mm ? This stud is the choice of mechanics looking to optimize the end of the hub or that use rims with a specific veil requiring less clearance.
As original room OTKThis stud ensures optimal thread length to ensure maximum safety holding with your wheel nuts, while avoiding unnecessary overhanglers. CAUTION: A "generic" piece cut off to the saw will never offer you the finish of the original nets, essential not to damage your aluminum hubs during tightening.
Thread safety: The accuracy of machining OTK Avoids "seizure" in the hub. A clean thread is a constant and reliable tightening.
Treated steel: This is not a mild steel of hardware. It is designed to withstand the cycles of lateral stress without deforming, ensuring that your wheel always remains perfectly perpendicular to the axis.
Square gain (clutter): The 28mm length is optimized for hubs OTK, allowing to mount the wheel nuts while remaining closer to the rim, thus reducing the risk of attachment or shocks on the stud.
"Attention with short studs: The golden rule is that the wheel nut must be fully screwed on the thread. The trick: With a 28mm stud, check that the thread is exceeding your wheel nut (or arrive at RAS) once tight. If you use 'open' or 'closed' (blinds' wheel nuts, make sure that the depth of the nut does not touch the bottom of the stud before tightening the rim! My Pro Council: Before mounting, a small copper grease on the hub-side stud thread prevents it from being souted with time. It's your best ally to disassemble it easily at the end of the season. "
| Feature | Specification |
| Type | Short hub stud |
| Diameter | 8 mm |
| Length | 28 mm |
| Mark | OTK GENUINE PARTS |
| Compatibility | All hubs OTK (Tony Kart, Kosmic, wished, redspeed) |
| Material | High resistance steel treated |
Q: Can I use this short stud if my hub requests a standard stud?
A: No. If your rim is thick, an too short stud will not leave enough for the wheel nut to be secure. Always use the length recommended by your workshop manual OTK.
Q: How do I know if I need the 28mm model or long model?
A: Simply measure the depth of your current wheel nuts. If you have "blind" type nuts (closed), the short stud is often necessary for the nut to support the rim without touching the stud.
Compatibility OTK : We guarantee you the exact factory-mounted piece on the chassis of the group OTK.
Speed: Because we do not fix a hub with a room "approximately" adapted.
Terms of Service
In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION
In the following :
The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.
The Buyer designates the Seller's customers, whether they act as a professional or an individual.
Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE
These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.
They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").
In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.
Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.
The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.
Article 3: SPECIAL CONDITIONS OF SALE
The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS
4.1. Product Features
The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.
4.2. Availability
The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.
The Seller reserves the right, at any time, to delete or modify a Product, without notice.
In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.
In the event of total or partial cancellation of the order:
- The order of the Buyer will be validated and his bank account will be debited for the entire order;
- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;
- The Buyer will be delivered Products available;
- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.
In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.
Here is the rule 2 content
Here is the rule 3 content