| Specification |
Technical details |
| Product type |
Front Tube Extension Kit for Kart Chassis |
| Generation / Design |
Compatible with type bodies Na2 / Na3 |
| Brand pedals |
CRG (High rigidity and race ergonomics) |
| Gain in length |
About +15 cm extra space for legs |
| Lower center distance |
44.5 cm |
| Superior |
55 cm |
| Compatibility |
Universal (adaptable on the majority of market chassis marks) |
| Conditioning |
Complete kit, ready to install |
Product complete Kit Chassis Extension Na2 / Na3 with Pedals CRG - Universal comfort for large drivers
Finally offer yourself an optimal control position and free your performance on the track thanks to the full chassis extension kit CRG. Specifically developed to meet the morphological constraints of pilots measuring more than 1m85, this high-end accessory makes it possible to retry the position of the legs in enjoying the front of your chassis about 15 cm.
The lack of space at the front of a standard kart often forces the large drivers to drive with too high knees, which hinders the passage of the steering wheel, disturbs the distribution of the masses and generates a premature muscle fatigue. This kit permanently resolves this problem by removing the complete pedal block to the front of the Na2 or Na3 body. Designed with standardized distance dials (44.5 cm lower distance of 55 cm), this robust system is highly adaptable and easily mounts on the vast majority of market chassis (CRG, Maranello, Zanardi, Kali-Kart, but also many competing brands). Delivered complete and ready to be installed, it allows you to find a perfect leg extension for a millimeter dosage of the brakes and the accelerator.
- The trick in Michel (the corner of the expert)
* "Hi great templates! Rolling in karting when we do more than 1m85, it is often the galley: we have the knees that type in the steering wheel, the elbows in the coast, and impossible to find the good feeling on the pedals. This kit extension CRG with pedals for Na2 / Na3 bodywork, it is a pure mechanical blessing. Win 15 cm on the front, it changes the life and dynamics of the chassis completely !
My indispensable mechanical trick for installation: extend your linkage and look after the cable passage !
Think again: If you advance your 15 cm pedals, your accelerator cables and your original brake rod will become too short! Do not tighten your current cables like guitar ropes. You must install a new longer accelerator cable (with its sheath) and use a steel-approved brake rod extension to compensate for the distance.
Second small tip: once the kit bolted on the distance (44.5 cm down, 55 cm at the top), check that the bottom of your new pedals CRG does not come rub or split your spoiler before. Adjust the stopper of the pedals so that when you overwrite the brake or accelerator thoroughly, nothing comes butter in the plastic of the body. A good tense position is the secret to send heavy in the curves! "*
- Installation & Mounting Guide: Step by Step
1.Demontage of the original front block:5 min.Put the kart on his stand trolley. Remove the front spoiler and the front panel (Nassau Panel). Disconnect your accelerator cable and the safety rod of your brake system. Disassemble your old original pedals.
2.Fixation extension CRG:10 min.Present the extension kit on the front tube of the chassis. Align the fasteners by respecting the dimensions (lower 44.5 cm and upper distance of 55 cm). Use high-strength hardware to securely bolt the kit on the frame.
3.Montage pedals and adjustment:10 min.Install the pedals CRG provided on the extension. Follow the tip in Michel: Replace your accelerator cable with a long model and adapt your brake rod. Connect everything to the pedals.
4.Verification of stops and reassembly:5 min.Climb in the tub to validate your new driving position. Test the stroke of stop stop pedals: the movement must be fluid and rub any one. Reassemble your Na2 / Na3 body. You are ready to take the track with a royal comfort !
- SEO FAQ (Frequently Asked Questions)
Q: Does this extension kit adapt on other brands that the chassis of the group CRG ? ?
A: Yes, quite. Although equipped with brand pedals CRG and geometrically designed to align with Na2 / Na3 type bodies, this kit is universal. Its fixing plates and its distance (lower: 44.5 cm / higher: 55 cm) allow it to be adapted to the vast majority of market karting chassis. We simply advise you to check the backs of the front of your chassis tube before purchase.
Q: Does lengthen the 15 cm frame modifies the behavior of Kart ?
A: Yes, and positively for large drivers! By removing your feet forward, you lower your knees, which lowers the overall center of gravity of the pilot / machine assembly. In addition, this allows you to slightly back your tub if necessary to load the rear yard, perfectly balancing the dynamic behavior of the kart in the winding bends.
Q: Is the kit delivered complete with all the hardware needed for mounting ?
A: The kit comes complete and ready to install with the extension structure and the pedal set CRG. The fastening screws at the chassis is included. On the other hand, the long accelerator cables, the sheaths and extensions of brake rods specific to the configuration of your hydraulic or mechanical braking system must be ordered in addition to your needs.