Presentation: the braking key in category kz

On a kart of the queen category Kz (gearbox), braking is carried out simultaneously on the four wheels via a single pedal. The brake pusher OTK BSS act as a scale (mechanized rudder) that receives the effort of your foot and distributes it to the rear brake pump and the front brake pump.

• Real-time adjustment: This system incorporates an adjustment knob (often connected to a steering wheel remote cable) that moves the pivot point. You can put more brake on the front or on the rear according to the evolution of the trail's grip.

• Manufacturing quality OTK : Machined in high-end materials to ensure null deformation under the effort. In Kz, the pressure on the pedal is extremely violent; This push group ensures a direct and rigorous feeling.

• Specific compatibility: Designed exclusively for group chassis OTK (Tony Kart, Kosmic, Expi, Redspeed, LN) Equipped with the approved braking system BSS.

- Technical specifications

- Setting and maintenance on the track

1. Basic setting: As a general rule, we start with a standard distribution of about 60% on the back and 40% on the front.

2. Adjustment Behavior: * If the kart slides from the back or "racket" to curve inlet braking: Put the brake on the front.

   • If the kart pulls straight when you push the pedal: Put the brake on the back.

3. GAMES CONTROL: The axes of the dispatcher receive huge constraints. Regularly inspect the absence of excessive game in the screens and make sure that the safety pins are perfectly in place.

💡 Michel's trick

"The BSS distributor is your best ally in kz for sleeve purposes when the rear tires begin to overheat. The trick: Over the towers, the fuel tank is empty, the kart is alleviating on the front and the grip changes. My Pro Council: Connect a steering wheel control knob to this dispatcher. This allows you to add one or two clicks to the back at halfway without lifting the foot. And do not forget to put a small drop of fine oil on the threaded axis of the castle so that the adjustment remains fluid, even with the platelet dust! "

❓ FAQ SEO (Frequently Asked Questions)

Q: Can we mount this BSS distributor on a monuolite chassis (OK / X30 / Rotax)? A: No. Monovite karts only use a rear brake (BSD or BWD systems) and therefore do not have brake pumps before operating. This double pushbutton is strictly reserved for KZ chassis with front brakes on foot.

Q: Did it come with the steering wheel adjustment cable? A: Generally, the mechanical push group is sold alone as a spare part for the bottom of pedal. The flexible cable and the brand wheel attached to the steering wheel are accessories sold separately.