By buying this product you can collect up to 11 loyalty points. Your cart will total 11 points that can be converted into a voucher of €1.10.
The front hub CRG 40x80 mm (R2.0 range) in anodized finish Gold is a part of the original manufacturer (Original CRG Share), specifically developed to meet the extreme mechanical stresses of the Queen category chassis Kz (gearbox).
With his Inside diameter of 40 mm (adapted to the large diameter rockets specific to KZ) and its 80 mm lengthThis hub of the R2.0 series offers a perfect seat for your front train. In kz, the power of the front braking and the motor torque require absolute rigidity. This CNC machined aeronautical quality aluminum hub enciesive these lateral forces without flexing, ensuring a Surgical directional precision in full support. Its superb gold anodized finish protects the aluminum from corrosion while bringing the official "racing" look of the group's high-end chassis.
The front hub CRG 17 mm in size m (Medium) is a high-end frame of the original manufacturer chassis (Original CRG Share), specially developed to refine the guidance of 17 mm rockets (currents on the chassis of the categories Mini, minimal, cadet, mini 60).
The great particularity of this version lies in its internal architecture to double bearing. Unlike standard hubs that only use one bearing at each end, this model integrates two juxtaposed bearings on each side. This technique makes it possible to double the contact surface on the rocket, offering a Distribution of colossal loads and increased rigidity of the front train. By limiting the flexion of the rocket axis during large supports or passages on the vibrators, this hub guarantees a perfect and constant geometry of your front tires.
The front hub CRG 25x80 mm (R2.0 range) in black aluminum is a part of the original manufacturer (Original CRG Share), developed for the frames of the single categoriesSpeed high level like the KF, OK, OK or TAG (X30, Rotax) using 25 mm diameter rockets.
With its balanced dimensions of 25 mm inner diameter and his 80 mm longThis R2.0 series hub is an essential standard to refine the settings of your front train. Its 80 mm intermediate length offers the rigidity necessary to ensure a precise and direct front train, while maintaining the flexibility required to allow the chassis to work optimally in curve. CNC machined in aeronautical quality aluminum, it is anodized in matte black for maximum wear resistance and a sober and official racing look.
The front hub CRG 40x96 mm (R2.0 range) in Magnesium (mg) is the ultimate factory piece (Original CRG Share), Developed specifically for the Queen category Kz (gearbox).
With its solid inner diameter of 40 mm and its maximum length of 96 mm, this hub of the R2.0 series is designed to bring a extreme rigidity at the front train. The choice of magnesium instead of aluminum is a high-level technical choice: it reduces the suspended weight while offering exceptional properties of thermal dissipation, which avoids overheating your rocket bearings and stabilizes the temperature of the rims during the overpowering braking of the kz. The length of 96 mm offers a maximum lever arm on the rocket, ideal for literally planting the front ground train and get ultra-direct behavior in the sinuous.
The front hub CRG 40x80 mm (R2.0 range) in black aluminum is a part of the original manufacturer (Original CRG Share), specifically developed to meet the extreme constraints of the Queen category chassis Kz (gearbox).
With its dimensions of 40 mm inner diameter (for the large diameter rockets specific to KZ) and its 80 mm longThis hub of the R2.0 series offers an ideal support surface to stabilize the front train. In kz, the front braking and the motor torque require absolute stiffness: this CNC machined aeronautical quality aluminum hub enciesces these forces without flinching, avoiding geometric deformation in full support and guaranteeing a Guidance of surgical accuracy. Its matte black anodized finish gives it excellent durability to the projections and the official factory team look.
The short front hub CRG 17 mm high precision aluminum is a part of the manufacturer origin (Original CRG Share), specially developed for the chassis of the range Mini (Mini 60, minimal, cadet) of the group CRG (CRG, Maranello, Dr. Kart).
The "short" version of this hub is an essential setting piece to refine the behavior of your front train. By reducing the contact and clamping surface on the rocket, this hub brings a greater mechanical flexibility by the front train, offering the young driver a brighter direction, a more incisive train and better registration in tight turns. CNC machined in a high quality aluminum block, it guarantees maximum strength for minimal weight.
The front hub CRG 25x80 mm (R2.0 range) in black aluminum is a part of the original manufacturer (Original CRG Share), developed for the frames of the single categoriesSpeed high level like the KF, OK, OK or TAG (X30, Rotax) using 25 mm diameter rockets.
With its balanced dimensions of 25 mm inner diameter and his 80 mm longThis R2.0 series hub is an essential standard to refine the settings of your front train. Its 80 mm intermediate length offers the rigidity necessary to ensure a precise and direct front train, while maintaining the flexibility required to allow the chassis to work optimally in curve. CNC machined in aeronautical quality aluminum, it is anodized in matte black for maximum wear resistance and a sober and official racing look.
The front hub CRG 25x80 mm (R2.0 range) in black aluminum is a part of the original manufacturer (Original CRG Share), developed for the frames of the single categoriesSpeed high level like the KF, OK, OK or TAG (X30, Rotax) using 25 mm diameter rockets.
With its balanced dimensions of 25 mm inner diameter and his 80 mm longThis R2.0 series hub is an essential standard to refine the settings of your front train. Its 80 mm intermediate length offers the rigidity necessary to ensure a precise and direct front train, while maintaining the flexibility required to allow the chassis to work optimally in curve. CNC machined in aeronautical quality aluminum, it is anodized in matte black for maximum wear resistance and a sober and official racing look.
The Brake Pads 2023 Front BirelArt 50x8 KZ EVO- Magickart For good braking use the brake pads BirelART
The KG BOOSTER air box is one of the most successful on the market, specially designed to offer a maximum air flow While respecting the FIA standards in force.
Equipped with Internal filter PO37 sprintIt guarantees an extremely low pressure drop, allowing the engine to breathe fully and to express its potential, both on the boxes with box (Kz) and on the mono-speed categories (OK - OKJ - OKNJ).
Thanks to his Innovative internal design, the KG Booster combines performance, noise reduction, particle control, and Optimization of the airflowWhat makes it a reference for competitors looking for the best of Italian technology kg.
Wladoil Racing 2T Oil - The oil reference for 2-stroke engines
Wladoil Racing 2T oil is specially formulated for 2-stroke engines, guaranteeing top-level performance and maximum protection. Designed for demanding racing conditions, this oil is one of the best choices for riders seeking reliability, durability and efficiency in competition. Distributed by IAME, this oil is ideal for X30 and KA100 engines. Like the CIK-FIA-approved LEXOIL 996, WLADOIL is authorized for use in the IAME Brand Cup for the X30 Junior and KA100 categories.
The X30 Europa challenge oil is particularly well suited to IAME engines, but can also be used with all high-performance kart engines (KZ, Rotax...). Sold in one-liter cans, this X30-approved oil is designed for very high-performance engines and contains 25% castor oil.
2020 Double Sens - Compatible Frame OTK
The2020 standard double-sense crown holder OTKis designed to provide reliability, lightness and ease of mounting on all compatible karting frames OTK (Tony Kart, Kosmic, FA Kart, Exprit, Redspeed).
The Racing Racing Kit Ø22mm with pierced coat 5 is a high-end set, specially designed for Karting Engines TM Racingincluding models KZR1-R2-R3, KZ10B, KZ10C, KZ10 and K9C (ES versions with electronic starter). This kit is Ideal for pilots and mechanics acknowledging optimal performancea Increased reliability and an exceptional durability for their engine.
Made with High quality materialsThis kit includes all the necessary parts to ensure a optimal functioning of the engine, even in the most demanding conditions of competitionKit connecting rod Racing Ø22mm Maneton pierce 5
BirelART 40x38 black brake pads are the perfect choice for drivers looking for optimal braking power , controlled wear and increased longevity . Give your kart high-performance, precise braking, ideal for competitions and intensive training.
⚠️ Pad sold individually – Be sure to order the quantity needed to equip your braking system.
piston TM Racing 10085 Represents the elite of engine technology for KZ categories. Designed specifically for the last generations of engines (KZ10C until R2), this model to Flat sky (zero degrees) is the absolute weapon to optimize combustion. Equipped with a Eightened segment of 0.8 mmIt drastically reduces internal friction, releasing more power at high speed.
Français
English
Deutsch
Espagnol
Italiano
Portuguès
ελληνικά
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent