By buying this product you can collect up to 3 loyalty points. Your cart will total 3 points that can be converted into a voucher of €0.30.
Optimize the braking power and stamina of your chassis with the sINTER brake pad set (sintered metal) red color, specially designed for braking braking systems of the brand IPK.
Recognized for their exceptional biting and their formidable resistance to "fading" (loss of efficiency due to overheating), these sintered platelets guarantee an ultra-powerful, constant and endural deceleration, ideal for the high level competition as for the demanding sporting leisure.
ℹ️ Dimensions of the wafer:
Height (h:) 40.0 mm
Length (L:) 60.0 mm
Thickness: 10.0 mm
Product Type: Sintered brake pads (SINTER.)
Compatible brand / Model: Specific for chassis and braking systems IPK.
Reference / Model: 497-0 (Red.)
Dimensions: 40.0 x 60.0 x 10.0 mm.
Material: Sintered metal (sintered) high performance, offering a high friction coefficient even at very high temperature.
Packaging: Full game for a caliper.
In karting, the braking system is subject to extreme thermal and mechanical stresses. As a tight shot at the end of the straight line, the brake discs can reach very high temperatures in seconds under the effect of flew decelerations.
The "SINTER" (or sintered) type pads are made by compacting high pressure and high temperature metal powders. Unlike traditional organic platelets, the sintered material supports colossal operating temperatures without melting or losing biting. Adopted by the best competition teams, they provide a "touch" of direct brake and a remarkable constancy of the first to the last round, regardless of the track conditions.
"Michel, our technical expert, recommends you: When replacing your SINTER pads on your IPK system, take the time to carefully clean the stirrup and push the pistons well flat. Do not forget to make a progressive break-in on a few Track Towers: Avoid trapper braking As soon as the pre-grid is exit. A good break-in allows the pads to apply perfectly to the friction track of your disk and guarantees an immediate maximum power. Regularly monitor the thickness of the packing: used platelets beyond the safety limit generate excessive heat in the hydraulic system. "
⚠️ Security Council: Braking is the vital organ of safety on your karting. Always check the status of the safety pins, the liquid level and the absence of leakage at the caliper seals before each rolling session.
Order your SINTER IPK (red) brake pad set now on Magickart.fr to repel your braking points safely. Fast shipping.
Q: Do the SINTER IPK platelets require a particular heating time ?
A: Yes, the sintered metal platelets offer a formidable efficiency, but they usually require a heating lathe or a slight braking of amadouption to give their full extent to soft trimming trimming.
Q: Are these platelets compatible with all IPK stirrups ?
A: They are designed for stirrups using the standard dimension dimension 40.0 x 60.0 x 10.0 mm (reference 497-0) on the chassis of the IPK brand. It is always recommended to measure your old used platelets to validate the exact match with your assembly.
Q: Does the braking sinter use the discs faster ?
A: Due to their harder and more abrasive metal composition than the organic packs, the SINTER platelets can actually increase the natural wear of the brake discs, in return for a power and an incomparable braking longevity in the race.
| Feature | Detail |
| Product type | Brake pad set |
| Technology | SINTER / Sintered Metal |
| Reference / Color | 497-0 / RED |
| Compatible mark | IPK |
| Height (h) | 40.0 mm |
| Length (L) | 60.0 mm |
| Thickness | 10.0 mm |
| Utilization | Competition and sports leisure |
| Conditioning | Full game (for a caliper) |
| Maker | Praga |
| Contact Manufacturer | |
| Legal opinion | |
| Age restriction | Any |
| SKU | |
| State | Nine |
| Key feature 1 | Maximum resistance to thermal fading |
| Key feature 2 | Biting and increased braking power |
H = 49.0mm, L = 89.6mm, thickness 12,8mm, M6, for CMP, EKS, Intrepid, Parolin
H = 46.2mm, L = 80.0mm, thickness 13,0mm, M6, for Intrepid, Ipk, Orange, Rosso Corsa
H = 49.0mm, L = 89.6mm, thickness 12,8mm, M6, for CMP, EKS, Intrepid, Parolin
The tree is the spine of your rear train. This original model OTK (Tony Kart, Kosmic, wished) In 50 mm diameter is designed to provide the perfect balance between rigidity and flexibility. Its length of 1000 mm is the standard for categories KF / OK and Rotax, offering maximum versatility on the majority of circuits.
Karting tank OTK 8.5 L 2013 KF is specially designed for group competition karts OTK. This tank is compatible with a wide range of karts, including Tony Kart models, Carlos Sainz, Redspeed, Kosmic, virtually known, and many others. It is intended for the karts OTK Without gearbox, offering a capacity of 8.5 liters for optimal autonomy on the Pist
OTK axle Ø 50 x 1030 mm KZ karting, Karting spare parts, Karting accessories, Karting shaft, Karting performance, Karting reliability, Karting maintenance, Magickart.eu, Karting axle choice, Karting weather, Karting grip
The OTK MXC 130 mm magnesium rim , sold individually, is ideal for karting competition. Ultra-light and designed to dissipate heat, it improves grip and tire durability. Compatible with Tony Kart, Exprit, Red Speed, Kosmic and Carlos Sainz chassis.
The RIM OTK MXC 210 mm in magnesium is specially designed for karting drivers looking for optimal performance. Used in competition by the biggest teams, this rim offers excellent thermal dissipation, thus reducing the overheating of the tires and optimizing their life.
Pack of 6 Motul GP 2T cans for 2-stroke kart engines. High-performance synthetic oil, superior lubrication, clean combustion, improved performance. FIA-CIK approved. Magickart: competitive prices, serious customer service.
The IAME electric starter is an indispensable component for karting drivers equipped with Iame engines. Designed to ensure reliable and fast starts, this electric starter is made with robust materials for a long service life.
Optimize the braking power and stamina of your chassis with the SINTER brake pad set (sintered metal) red color, specially designed for braking braking systems of the brand Ipk.
Recognized for their exceptional biting and their formidable resistance to "fading" (loss of efficiency due to overheating), these sintered platelets guarantee an ultra-powerful, constant and endural deceleration, ideal for the high level competition As for the demanding sporting leisure.
Français
English
Deutsch
Espagnol
Italiano
Portuguès
ελληνικά
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent