Loxeal 18.10

By buying this product you can collect up to 2 loyalty points. Your cart will total 2 points that can be converted into a voucher of €0.20.

En cliquant vous allez être redirigé vers le site sécurisé de notre partenaire SOFINCO

Description
Product Details

LOXEAL 18.10
Anaerobic resin for P.T.F.E for mounting piping and threaded connections. Seals gas, water, gasoline, lubricants and industrial liquids.

Approved for gas (Australian Gas Association Approval No. 5047) for a pressure of up to 1050 Kpa. Approved for drinking water (according to Circolare Ministero della Sanità 102/78 Italy). Replaces P.T.F.E tape, provides immediate sealing for moderate pressure. The product turns into a flexible polymerized film. Thixotropic product, does not flow during polymerization. Stable and flexible product, resists vibration and shock. Easy take off even after several years.
Composition Anaerobic methacrylate resin in P.T.F.E
White colour
Fluorescence Yes, under U.V
Viscosity at 25 ° C (ISO 2555) 17,000 - 50,000 mPas Thixotropic
Density at 25 ° C (ISO 2811) 1.0-1.1
Threaded diameter max / Max clearance M80 / 0.30 mm
Flash point> 100 ° C
Solvent content No
Storage time at 25 ° C 1 year

Product technical data
Thread M 10x20 - Quality 8.8 - Nut h = 0.8.d
Shear strength 4-6 N / mm²
Torsional strength
* rupture 7-10 N / mm²
* residual 2-4 N / mm²
Tensile strength 3-5 N / mm²
Handling time 20-40 minutes
Commissioning time 1-3 hours
Complete polymerization 5-10 hours
Temperature range - 55 ° C to + 150 ° C
Elongation capacity Rupture at more than 100%

Precautions for use
Consult the safety data sheets.

Reference GUFD50

Specific References

Product Comments

Comments (0)

Viewed products

€131.59

CRG

DISQUE DE FREIN AV V11 Ø154 CRG

in the same category

€33.99

32 FIVE

32Five NO Limits - Orange Fluo

€42.90

Motul

3 oils Motul 2t for KART GRAND PRICE 2T

THE'Oil Motul 2T Grand Prix for Kart is more than just a lubricant: it is your ultimate ally for optimal performance on the track. This advanced synthetic oil is specially formulated to meet the requirements of high performance two-stroke engines, providing durable protection and friction reduction for maximum efficiency.

€5.36

brush for tire mounting Ø: 35mm

€16.70

VIS H M10 SPHERIQUE sodi

plaque-fixation-biellettes-crg-r2.0-r25-31-mini-kart-Magickart

€9.85

CRG

Directional column plate R 2.0 R25-31 CRG

The plaque R 25-31 is specifically dimensioned for short wheelbase chassis. It defines the demultiplication ratio between the steering wheel and the wheels for the minimal and cadet categories.

Geometry R 25-31: The numbers indicate the distance positions (25 mm and 31 mm) of the mounting holes. This configuration offers a shorter lever arm than on adult models, avoiding too violent direction or too heavy for a child.
Adjustment of the Ackermann:
- 25 mm holes: Direction more direct, ideal for winding circuits.
- Holes at 31 mm: Steering more stable and progressive, recommended for large curves or beginners.

€59.90

ZAMP

Hans clips

€239.99

CRG

Axle 50 black 1060 CRG

hub-rear-MAF-magnesium-50x105-2-vis-r2-0-competition-magickart

€174.26 -14% €149.86

CRG

50x105 R2.0 Rear Hub 2 VIS MG CRG

The 105 mm in magnesium is a high competition room. This is not a basic setting, it is a specific solution for specific needs:

Maximum lever arm: With 105 mm, you drop the load outward to load the outer rear tire. It is the absolute weapon when the kart is sorely lacking on the turn out of turn.
System "2 screws": In a length of 105 mm, a one-screw tightening would be insufficient and would create an imbalance. The system to 2 screws Allows you to distribute the tightening force over the entire length of the ring, ensuring a perfect maintenance on the axle without creating a single voltage point.
Magnesium (mg): It offers valuable weight gain on non-suspended masses and thermal dissipation that stabilizes the pressure of your tires during long finals.

€139.95

Alpinestars

Karting neck tower Alpinestars junior

Specifically designed to adapt to the morphology of junior drivers or small template, the neck tower Alpinestars operates when the headset and the support structure offer an alternative charging channel for excessive energy compressing the neck. If the headset is in contact with the cervical protection at the time of the shock, the overall load compressing the neck can be reduced and this can prevent a fracture or reduce the possibility of muscle injury caused by the excessive movement of the head. Although the risk of injury can not be completely eliminated, it is turned out that protection reduces the most serious damage and minimizes the risk of collateral injury because the impact load is channeled far from C

€44.95

copy of GANTS KARTING ALPINESTARS TECH 1...

Vis Tête Cylindrique Six Pans Creux 8 x 45

€0.99

OTK

Vis Tête Cylindrique Six Pans Creux 8 x 45

VIS VALVE KIT ADJUSMENT 53090 DELL'ORTO (59) VHSH VHSB

€5.99

VALVE VALVE KIT ADJUSMENT 53090 DELL'ORTO...

€0.99

Iame

Fixing screws of valves X30 / KA100 (171)...

TheX30 / KA100 valve mounting screws(mark #171 on the broken view of the X30 and #70 on the KA100) is asmall specific screwused forhold the valve boxon the engine crankcase. It ensures the strength of the fixing while guaranteeing thesealing of intake flowbetween the crankcase and the block valves.

€9.80

Tm racing

Secondary fork axis TM R1 (4)

€89.90

WK water pump

Colonne de direction Min/Cad 2018 Long.430mm

€59.88

Tonykart

Steering Column Min / CAD 2018 Long.430mm

€142.49 -30% €99.74

BIREL

Rear wheel hub 50 mm x 115 - 8a hq birelart

The 50mm x 115 Rear Wheel Hub - 8A HQ Birelart is a high-end component, specially designed for Birelart Chassis, RicCiardo, Charles Leclerc, Kubica and LGK. This hub, made in Black anodized aluminum, offers a Ultra-secure fixation the rear wheel, guaranteeing a optimal stabilitya exceptional durability and an professional aesthetics.

With his robust design and his 115 mm length, this hub is Suitable for axles of 50 mm, ensuring a optimal power transmission and an Vibration reduction. His Black anodized treatment gives him a Increased corrosion resistance and an premium finish, ideal for competition karts.

€288.90 -20% €231.12

Tm racing

Complete rod TM Racing maneton 20mm

NGK R7282-11 candle at the best price at Magickart

€74.59 -20% €59.67

ngk

Candle NGK R7282-10

The bougie NGK R7282-10 is an essential component for any karting driver concerned with performance and reliability. With its platinum and iridium mass electrode, it ensures exceptional electrical conductivity and maximum engine responsiveness. Available in several versions and requiring a special cover for mounting, this is a wise investment for any serious driver.

€595.00 -€45.01 €549.99

Rotax

copy of CYLINDRE Rotax JUNIOR/MINI/MICRO...

The Engine Cylinder Rotax 125 cm3 is an essential part for karting engines Rotax. Designed to provide optimal performance and increased durability, this cylinder is made of high quality materials to withstand the demanding karting conditions. The bores generally observed according to the letter struck on the cylinder are as follows:

€13.89 -€1.00 €12.89

Tm racing

GUARN PRINTING DISCUSSION R3.R2/R1K8/9/B/C...

The clutch disc (marker)9on the broken view) is an original high performance friction partTM Kart. Designed to withstand the extreme temperatures and enormous torque constraints of the 125cc gearbox (KZ) engines, it ensures a perfect connection between your engine and the gearbox. Its specific trim is designed to offer a progression at the start while guaranteeing an immediate grip as soon as the pedal is released.

130-210mm DF HQ Freeline Birelart Black-Magickart wheels

€426.00 -€15.00 €411.00

BIREL

130-210mm magnesium wheels DF HQ FREELINE...

Optimize the adhesion and durability of your tires with the 130-210mm DF HQ FreeLine Birelart magnesium wheels, designed to provide increased rigidity and optimal track performance.

The magnesium rims represent the ultimate evolution for demanding pilots, seeking to maximize the effectiveness of their tires and the responsiveness of their kart. Developed in collaboration with the Race Department of BirelThis Freeline Birelart Black DF HQ model incorporates the latest innovations to reduce tire wear and improve adhesion, especially at the back of the kart.

€26.00 -10% €23.40

BIREL

Brake Pad 2023 Front BirelArt 50x8 KZ EVO

€269.90 -10% €242.91

Description

Product Details

Specific References

Product Comments

Viewed products

CRG

in the same category

32 FIVE

Motul

CRG

ZAMP

CRG

CRG

Alpinestars

OTK

Iame

Tm racing

Tonykart

BIREL

Tm racing

ngk

Rotax

Tm racing

BIREL

BIREL

TheHQ VAN Ø rod kit20x102 mm type IAME X30is a compatible part for X30 engines. Designed to offer a reliable alternative in engine maintenance, this kit includes a rod adapted to the specifications of the X30 crankshaft with Ø handleton20 x 48.8 mm.