By buying this product you can collect up to 9 loyalty points. Your cart will total 9 points that can be converted into a voucher of €0.90.
The Magnesium disc holder is a high performance piece designed for competition frames using a back tree of 40 mm. The choice of magnesium is not aesthetic: it allows a considerable weight gain with respect to aluminum, reducing the gyroscopic effect for faster rotation and a better agility of the rear yard.
Its structure is studied to maximize the flow of air, providing a function autoventilée which helps to dissipate the heat of 180 mm disk during repeated and intensive braking.
Material: Magnesium high quality (lighter and better thermal dissipation than aluminum).
Tree diameter: Ø 40 mm.
Compatible disc diameter: 180 mm.
Type: Selfnetized (openwork design for the air flow).
FIXING: Standard keying and tightening by high resistance BTR screw.
Finish: Specific surface treatment to prevent magnesium oxidation.
🎁 Magickart Fidelity Program: By investing in noble materials such as magnesium, you are cumulate loyalty Magickart for your next discs or brake pads!
"Skip on magnesium, it's the detail that shows that you spend a course in the preparation. My expert advice: Magnesium is more efficient but also more sensitive. Do not tighten as a deaf! Use a torque wrench to not split the disc holder.
Indispensable with your magnesium disk holder:
180 mm brake disc (cast iron or steel): Check the wear of your current disk before mounting. A veiled disc would vibrate your beautiful new disk carrier.
New fixing screws: It is always recommended that you use new screws with net (Loctite) brake to secure the disc on the media.
Clavette of 8 mm: Make sure your key is perfectly adjusted, without play, to prevent mechanical shocks with each braking.
A small procy of Pro: To keep the 'factory' aspect, clean it only for the brake cleaner and avoid acidic products that could attack the surface treatment. At Magickart, we know that every gram gained on the back tree translates into less tenths on the chrono! "
Combination Speed Racing Barcelona RS-1 Black-Neon Orange
Discover the official cap of the Mercedes-AMG Petronas Formula One Team, designed in collaboration with adidas Motorsports. This cap is perfect for motor racing fans who want to show their support for their favourite team, whether from the stands or at home.
Thechassis OTK REDSPEED RXRis a high-end model designed for categoriesRotaxX30,KA100developed by the groupOTK Kart Group, one of the most successful and rated manufacturers in the world of competitive karting.
Made ofchrome-molybdenum steel with tubes of Ø30 mm, this chassis offers an excellent compromise between rigidity, steering precision and performance on all types of circuits. Its design allows a very high precision of adjustment, making it a chassis particularly appreciated by drivers and competition teams.
TeamedBWD rear brake system with Ø180 mm disc, it guarantees a powerful, progressive and constant braking even under the most demanding conditions. The many processed and anodized aluminium and magnesium components ensure lightness, reliability and performance.
Black anodized front brake clamp, designed for braking systems type KF/MA20, specially adapted for Mini Kart chassis.
A product of Righetti Ridolfi technology, this clamp is part of a certified hydraulic braking system, ensuring performance, reliability and competitive compliance. Its design ensures accurate and constant braking, ideal for young drivers in the Mini category.
Demi étrier de frein V09/V10 droite or CRG. Il presse les plaquettes sur le disque pour ralentir le kart.
Magnesium brake disc holds - 180 mm - Ø 50 mm - self-liked
Ø 22 - 10 mm
TheOMP KS-3Xis not a mere evolution, it is a revolution of comfort and security. Designed to meet the latest standardFIA 8877-2022, she succeeds in being30% lighterthe old generation while offering increased abrasion resistance. This is the number one choice of pilots who want to forget that they are wearing protection to focus only on their trajectory.
Offer a direction of irreproachable accuracy and definitely delete the peak train games before thanks to the Original steering ball OTK Kart Parts. Original mounting on all the chassis of the Italian group (Tony Kart, Kosmic, Expi, Redspeed, LN Kart, Gillard), this high quality Uniball ride is also Compatible with all market karting chassis marks using M8 thread rods.
Made in a high quality shock-resistant and repeated flexion steel, it incorporates a rectified and self-lubricated ball cage. It guarantees a movement of extreme flexibility, without hard point, while offering exceptional resistance to track wear.
The Vertical Trolley Kart Holder with Casters is one ingenious solution To optimize the storage space and facilitate the transport of your Kart chassis. Designed to meet the needs of Drivers, mechanics and competition teams, this cart combines Robustness, practicality and mobility.
Thanks to his Four self-directional wheels, this trolley allows a fluid and effortless displacementeven in restricted spaces like stands or garages. Its Chromed steel structure guarantees a maximum stability and an durabilityeven in case of intensive use.
Make the longevity and optimal performance of your Karting TM engine with the KART KART KART pocket, K9, K9B, K9C. This complete seal kit is designed to redo the top and bottom driving from your karting, ensuring perfect sealing and increased durability
TheKarting shoes KS-X FIA 8877-2022are developed byOMP Racing, the world-renowned motorsport equipment manufacturer for the quality and performance of its competing products.
This high-end model responds to thenew approval FIA 8877-2022, conforming to the latest standards imposed in international karting.
Equipped with the exclusive disc lacing systemONE EVO X R, they allow a precise, fast and homogeneous adjustment, ensuring optimal foot retention during the pilotage.
The KA100 exhaust from IAME is an essential component for any karting driver concerned with the performance and reliability of its engine. Compatible with IAME X30, KZ, and other similar models, this exhaust system ensures efficient gas evacuation, improving engine power and efficiency. Easy to maintain thanks to our cleaning tutorial, this is a wise investment for any serious driver. Remember that the pot must be marked with the IAME logo, mandatory in competition. Check out our video at the bottom of the description to learn how to clean your exhaust
The Brake Pads 2023 Front BirelArt 50x8 KZ EVO- Magickart For good braking use the brake pads BirelART
Discover the Piston IAME KA100, designed to deliver outstanding performance and unrivalled durability to your engine. Made with high quality materials, this piston is especially suitable for IAME KA100 engines, ensuring optimum efficiency and longer life.
The Racing connecting rod Ø22mm pierced manter 6 is a complete set designed for karting engines KZR1, KZ10B, KZ10C, KZ10, and K9C with electronic starter (ES versions). This kit includes all the necessary parts to ensure optimal performance and increased durability of your engine.
The Racing Racing Kit Ø22mm with pierced coat 5 is a high-end set, specially designed for Karting Engines TM Racingincluding models KZR1-R2-R3, KZ10B, KZ10C, KZ10 and K9C (ES versions with electronic starter). This kit is Ideal for pilots and mechanics acknowledging optimal performancea Increased reliability and an exceptional durability for their engine.
Made with High quality materialsThis kit includes all the necessary parts to ensure a optimal functioning of the engine, even in the most demanding conditions of competitionKit connecting rod Racing Ø22mm Maneton pierce 5
piston TM Racing 10085 Represents the elite of engine technology for KZ categories. Designed specifically for the last generations of engines (KZ10C until R2), this model to Flat sky (zero degrees) is the absolute weapon to optimize combustion. Equipped with a Eightened segment of 0.8 mmIt drastically reduces internal friction, releasing more power at high speed.
Coil - unit for IAME engines X30 model produced from 2016
The Magnesium disc holder is a high performance piece designed for competition frames using a back tree of 40 mm. The choice of magnesium is not aesthetic: it allows a considerable weight gain with respect to aluminum, reducing the gyroscopic effect for faster rotation and a better agility of the rear yard.
Its structure is studied to maximize the flow of air, providing a function autoventilée which helps to dissipate the heat of 180 mm disk during repeated and intensive braking.
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent