By buying this product you can collect up to 7 loyalty points. Your cart will total 7 points that can be converted into a voucher of €0.70.
The Zamp Z-20 series visors are shields designed to fit all helmets Zamp series RZ. They are FIA approved, which makes them conform to the safety requirements of car and karting competitions regulated by the International Automobile Federation.
A 3 mm thickness, these visors offer a enhanced strength against impacts while ensuring excellent visibility. They have detachable rods for easy mounting and anti-fog coating improves visibility comfort regardless of weather conditions.
Important: The transparent film supplied with standard visors shall not not be applied to Prism visors, as this may damage the visor's specific coating.
Approval FIA (according to competition standards)
Compatible with all helmets Zamp series RZ
Thickness: 3 mm for increased resistance
Coating anti-fog integrated
Detachable tips for simple replacement
Optimal visibility and enhanced comfort
Do not use electrical tools and do not tighten too much screws when mounting.
Place a towel on a flat surface and place the helmet on top.
Remove pivot tensioners (small side screws).
Remove pivot screws (large side screws). It is recommended to use a coin to loosen/tighten.
Remove the visor. Clean the rubber seal and mounting area with a soft cloth.
Position the new visor on the helmet by checking that the two white washers are in place.
Screw the pivots by hand (large screws), then tighten with a piece until properly placed, without excess.
Screw the pivot tensioners by hand, then adjust the visor tension according to the desired movement.
Approved FIA for competition
Fast installation without complex tools
excellent optical clarity
Secure and durable assembly
The Zamp Z-20 visor FIA certified is the essential accessory to maintain your helmet in regulatory compliance, while offering maximum comfort, performance and safety on the runway.
The Full rocket OTK is an essential part for Tony Kart brand karting chassis, Carlos Sainz, Kosmic, virtually known, EOS, and Redspeed. Designed to provide optimal performance and increased durability, this rocket is of origin OTK and adapts perfectly to the KF or OK chassis.
The new FIA Kerb Advanced combination complies with the new FIA 8877-2022 standards
The new FIA Kerb Advanced combination complies with the new FIA 8877-2022 standards
The new FIA Kerb Advanced combination complies with the new FIA 8877-2022 standards
Get the look of your favorite racing team with this iconic Scuderia cap Ferrari. This iconic article will add a touch of fast style to any outfit, allowing you to show your allegiance, whether on the edge of the track or elsewhere! Cap RP Cap Dark Cherry Charles Leclerc is an essential fashion accessory for all Scuderia fans Ferrari and Charles Leclerc.
The front brake clampMA20 KFis designed for competitive karts equipped with front braking systems (KF categories, KZ, etc.). Manufactured inaluminium forged high strength, it guarantees excellent rigidity and precise braking response.
Its finishblack anodizedensures lasting protection against corrosion and wear, while offering a sober and racing look.
Developed for intensive use in competition, this clamp significantly optimizes front braking, bringing more power, consistency and control.
TheNew-Line Durite Supportis the professional solution to organize and secure the passage of your cooling hoses along the seat. Made of high-strength plastic, this support prevents the durites from rubbing against the chassis or packaging, thus limiting the risk of premature wear or vibration drilling.
Its lightweight and robust design is specifically adapted to the constraints of competitive karting (KZ, X30, Rotax).
Centerpiece of your low engine, the Crankshaft TM Kart for model KZ R3 Guarantees optimal power transmission, perfect balancing and maximum strength to the extreme schemes of the competition.
high quality rocket in 17ø length 13cm with rear thread
either to weld or to screw
The hub of 95 mm is one of the longest models available in the range CRG. In karting, the length of the hub is directly correlated to the "lever arm" applied to the axle:
Deported support: With 95 mm, you drop the load of the wheel outwardly. This helps to charge the rear train in support more, ideal for tracks where you miss moving out of turn.
Aluminum rigidity: Unlike magnesium, this aluminum version offers high structural stiffness and excellent durability, while being easier to maintain and less sensitive to oxidation. Finishing Gold (anodized) effectively protects the part against premature wear.
Combination of Karting Daytona 2.0
The steering ball OTK is a high precision component designed to offer a bond without a game between your steering column and your rods. Unlike adaptable models, original ball joints OTK Use specific materials and machining that guarantee a perfect fluidity and increased durability, even under the extreme stress of OK or KZ categories.
It is delivered complete with its M8 fixing nut, ready to be mounted to restore your train before its original cutting edge.
Deco kit Tonykart Complete minimal-cadet M4
Filter Cobra Racing
Diameter of the compatible fuel line: 1/4 inches (6mm)
Washable and contributes to the cleanliness of your engine
To use kart, motorcycle ...
Material: Aluminum and copper
Specification:
Easy to install (no additional tool required)
THE'AGIP oil ENI 2T is a high-end synthetic lubricant specially formulated for two-stroke karting engines. Used in the Vortex Rok Cup, this oil meets the strictest performance and protection requirements.
Compulsory racing numbers for karting, sold individually. Durable and perfectly visible, they ensure identification in accordance with competition regulations. Select your number from the drop-down menu.
The bootsSparco K-Polerepresent the ideal compromise between comfort, durability and aggressive design. Designed to meet the requirements of karting drivers, from leisure to competition, they offer exceptional pedaling precision thanks to their ultra-fine sole.
The Red Bull Racing backpack MV1 is an indispensable accessory for all enthusiasts of the famous stable. Practical, robust and sports design, it is suitable for both school and for daily trips or outdoor activities.
The KG BOOSTER air box is one of the most successful on the market, specially designed to offer a maximum air flow While respecting the FIA standards in force.
Equipped with Internal filter PO37 sprintIt guarantees an extremely low pressure drop, allowing the engine to breathe fully and to express its potential, both on the boxes with box (Kz) and on the mono-speed categories (OK - OKJ - OKNJ).
Thanks to his Innovative internal design, the KG Booster combines performance, noise reduction, particle control, and Optimization of the airflowWhat makes it a reference for competitors looking for the best of Italian technology kg.
Discover this Exclusive Burago Pack including 4 monoplaces of Formula 1 at 1/43 scale, representing some of the most emblematic pilots of the current grid. An ideal set for collectors, F1 enthusiasts or to offer a complete and spectacular gift.
The Special bridle rear bumper Ø30mm aluminum cobra is designed for Hold your bumper firmly during karting races, even in case of violent shocks with your opponents. Made in High strength aluminum, this flange offers a Robust and light solutionideal for Protect your kart Without weighing your chassis.
Take an essential garment and give it a real touch of racing. No clothing will accompany you as far and in as many circumstances as the classic T-shirt, so make sure it reflects your passion while highlighting you. The Scuderia T-Shirt Ferrari RP Team Tee is a must for all Scuderia fans Ferrari.
Take an essential garment and give it a real touch of racing. No clothing will accompany you as far and in as many circumstances as the classic T-shirt, so make sure it reflects your passion while highlighting you. The Scuderia T-Shirt Ferrari RP Team Tee is a must for all Scuderia fans Ferrari.
The rear brake disc OTK Ø180x13mm self-ventilated BWD is a high-end component, specially designed for Group Karts OTK from 2025 (Tony Kart, Kosmic, Redspeed, virtually known, Carlos Sainz, Gillard, etc.). This disc self-ventilated offers a optimal braking powera exceptional durability and an Resistance to thermal and mechanical stresses, essential for competitive performance.
Made in Treated and treated steelthis disc is Optimized for active cooling, thanks to his Integrated ventilation fins, which allow a rapid dissipation of heat. This guarantees a Constant and reliable brakingeven during the most intense sessions.
The OTK 50 mm 180x13 Magnesium - BWD brake disc holder, new 2025, is an essential part for chassis from the OTK group, including Tony Kart, Kosmic, Exprit, Carlos Sainz, EOS, and Red Speed. Here's some more information on this product:
TheZamp Z-20 series visorsare shields designed to fit all helmetsZamp series RZ. They areFIA approved, which makes them conform to the safety requirements of car and karting competitions regulated by the International Automobile Federation.
A3 mm thickness, these visors offer aenhanced strengthagainst impacts while ensuring excellent visibility. They havedetachable rodsfor easy mounting andanti-fog coatingimproves visibility comfort regardless of weather conditions.
Important:The transparent film supplied with standard visors shall notnotbe applied to Prism visors, as this may damage the visor's specific coating.
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent