Moyeu Roue Arrière 25 mm x 30-6 A / P HQ BirelArt

By buying this product you can collect up to 6 loyalty points. Your cart will total 6 points that can be converted into a voucher of €0.60.

En cliquant vous allez être redirigé vers le site sécurisé de notre partenaire SOFINCO

Description
Product Details

Wheel Hub 25x 30-6A / P HQ

Length 30 mm

Anodized aluminium

For 25 mm axles (Easykart Easykart 60cc or 50cc)

Reference 10.11680.00-NE

Specific References

Product Comments

Comments (0)

in the same category

€27.99

Rotax

Rotax Max Clutch Repair Kit

Headquarters Stripper Oval Section - Magickart

€10.00

Turner for Karting Siege Oval Section

The seat stiffener for karting is an essential accessory designed to improve the safety, comfort and performance of pilots. It is compatible with all Karting chassis marks and is designed to keep the seat in a secure way. In the event of an accident, the seat stiffener helps to avoid injury by keeping the seat firmly in place, thanks to a suitable bolting. In addition, it allows to add or remove the grip, thus influencing the flexibility of the chassis. Often, it is recommended to put 1 or 2 on each side of the seat to optimize performance. It is an essential element for the proper operation of the chassis, modifying its behavior according to the addition or the removal of stiffeners. The seat stiffener allows you to stiffen your frame and thus create a connection between the tub and your back shaft. Several lengths are available depending on the position of your seat. Several sizes are available because each chassis and seat size are different. CAUTION: The measured length is the center distance of the 2 holes.

career-Cutrier-Brake-Otk-Magickart-Brake-Backrest

€4.59

OTK

Square Arrier Callet OTK

Restore the bite and safety of your braking system with the Official square rear caliper trim OTK. This original brake cup is a vital hydraulic spare part, specifically designed to ensure the perfect containment of the brake fluid under pressure around the pistons of your rear caliper.

As highlights the photo, this joint is distinguished by its square section. Unlike a simple round O-ring, the square profile offers a flat contact area and maximized against the piston wall and the internal housing of the caliper. This technical geometry allows the seal to deform slightly during the pressure on the pedal to accompany the movement of the piston, then to "recall" in place during the release. Designed in a high-end elastomer resistant to extreme temperatures and chemical aggressiveness of hydraulic fluids, this seal removes liquid leaks and prevents air from entering the circuit.

€1.50

BIREL

8x18x3 birelart washer

€11.00

hornet line

Chrome and Glass Fuel Filter - 6 mm

Iame

NGK BR9 EG Candle

4 JOINT SPy VILO

€0.00

€11.59

Tm racing

TM Cage à aiguille 35x12 (10)

€15.70

Speed

Pinion for motor 4T

ADIDAS RSK KART GLOVES

Copper cylinder head 72,3x67.8 SP 0.10 mm vortex mini 60 fr-magickart

€2.40

VORTEX

Copper cylinder head 42,3x67.8 SP 0.10 mm...

The Copper cylinder head gasket 42.3 x 67.8 mm for Vortex mini 60 en is an essential element of the high engine. It ensures the perfect seal between the cylinder head and the cylinder while allowing the compression ratio thanks to the different thicknesses available precisely.

Made in High quality copper, this seal withstands high temperatures and high pressures generated by the mini engine 60 in use competition

€3.69

dellorto

TEST FILTER 11957A DELL'ORTO (38) VHSH VHSB

€2.39

Tm racing

Joint de boîte à clapets TM

€29.99

Game Sinter Parolin games

€2.40

Tonykart

TB screw 5 x 20

€23.90 -€2.10 €21.80

Lexoil

LEXOIL oil 996 evo1 premium

The LEXOIL 996 Evo1 Premium oil is specially developed for 2-stroke engines up to 250cc with gearbox. This kart oil guarantees high burning speed, maximum efficiency and performance. It is designed not to form a calamine deposit, thus avoiding hot spots and loss of performance. Based on the latest lubrication developments, the LEXOIL 996 oil clearly upgrades all current lubricants.

€120.00 -10% €108.00

Rotax

Piston Rotax Origin 53.98 with 2018 segment

The piston with original band Rotax is an essential component for engines Rotaxdesigned to provide optimal performance and exceptional durability. This piston is suitable for multiple engine models Rotax, including the Rotax Micro max, Rotax Mini max, Rotax Junior, and Rotax Max (senior). Fabricated Rotax, a brand recognized for its quality and innovation in the karting world, this piston is ideal for demanding drivers looking for reliable and efficient solutions for their karting engines. In addition, Magickart offers this piston at a more competitive price than that of French and Italian competition, allowing you to benefit from the best quality at the best price.

€125.00 -10% €112.50

Rotax

Rotax 53.99 piston with 2018 segment

chassis-karting-MAF-kt2-OK-v2-30mm-magickart

€2,157.12 -12% €1,898.27

CRG

Frame CRG KT2 30/30 OK 2026

The CRG Kt2 is the versatile chassis par excellence of the Italian manufacturer. Unlike the Rébec Road (more rigid), the KT2 uses a frame compound full of tubes of 30 mm in diameter. This architecture offers controlled flexibility, ideal for freeing the engine in categories without gearbox like the OK, Iame X30 or the Rotax Max.

Its geometry allows fast adaptation to all track conditions (high grip or green track "). Featuring the last components of the range CRG RacingHe combines exceptional motor skills at a surgical front train accuracy.

€2,157.12 -12% €1,898.27

CRG

Frame CRG KT2 30/30 KZ 2026

The CRG KT2 2026 Version Kz redefines the standards of the Queen category. While the Road Rebel (32mm) remains the choice for the tracks with very high grip, the KT2 in 30mm Has become the favorite weapon of Kz pilots looking for more agility and ease in the support changes.

For 2026, CRG Reworked the composition of chrome-molybdenum steel to provide a better response from the front train during degressive braking. This KZ version stands out for its localized structural reinforcements and its integral front / rear braking system, essential to stop the power of 50 horsepower engines

€67.50 -10% €60.75

CRG

Rear hub 30x35 black complete CRG

The hub of 35 mm long is considered a "short hub". In karting, The choice of hub length is a fundamental adjustment tool:

Short hub (35 mm): It offers less contact surface with the axle than models of 75 or 90 mm. This usually allows to have a "freer" behavior of the rear train, Helping the chassis to be free from curve, Ideal on tracks with a lot of grip (adhesion).

hUYEU-BACK-CRG-30X40-Black-Complete-Axle-30mm -Magickart

€67.50 -10% €60.75

CRG

Rear hub 30x40 black complete CRG

The hub of 40 mm long is often considered the "standard" or "versatile" value on adult karts equipped with a 30 mm (x30, axle, Rotax, Kz, ok). Unlike very long (75-90mm) hubs that considerably rigidify the rear, or the very short (35mm) that fully freed the chassis, the 40 mm Offers neutral and healthy behavior, ideal for starting a setting session before refining.

hub-rear-MAF-aluminum-gold-50x85-r2-0-karting-competition-magickart

€132.00 -10% €118.80

CRG

50x85 gold rear hub R2.0 complete gold...

The hub of 85 mm is a "long" adjustment room. In karting, the choice of the hub length is directly related to the leverage exercised on the axle:

Stability and Grip: With 85 mm, you increase the rigidity of the rear train and removing the load outward. This is the ideal tool for more moving output output or to expand your back path without stacking spacers (which weakens the assembly).
R2.0 version: This name indicates an evolution of design at CRG (best machining, optimized weight and anodized finish "Gold" for higher resistance to corrosion).

WHEEL HUB 25x30-6A/P HQ BirelArt

Description

Product Details

Specific References

Product Comments

in the same category

Rotax

OTK

BIREL

hornet line

Iame

Tm racing

Speed

VORTEX

dellorto

Tm racing

Tonykart

Lexoil

Rotax

Rotax

CRG

CRG

CRG

CRG

CRG