The Complete X30 IAME Biel Kit is a set of essential parts for the competitive karting engine. This kit is specially designed for IAME X30 engines, known for their performance and reliability in competition. It is strongly recommended to mount the rod by a karting professional to ensure a correct and optimal installation.
Ensure the safety and performance of your braking system with the Brake Pump Review Kit CRGDesigned for chassis V11, V10, V09, V05, V04, UP, Mini and Cadet.
In the karting world, the reliability of the braking system is an absolute imperative to ensure both pilot safety and the track efficiency. CRGOne of the world leaders in Kart chassis design, offers review kits for brake pumps fully composed of original parts, specially developed to meet the strictest motor sport requirements.
The Xeramic® Extra high temperature red joint paste is specially designed for Motors equipped with Lambda probes.
It ensures a reliable and durable sealing In applications subject to very strong thermal stresses, while effectively replacing traditional joints.
Ideal for intensive mechanical use and competition, this joint dough is resistant to Oils, water, transmission fluids and antifreeze products.
This Threaded plastic plug M18 x 1.5 is a certified original spare part for karting engines Rotax Max dd2 (Direct drive motors with gearbox).
The Guillotine body (n ° 7) is the fixed part that screws on the cylinder and in which the movable guillotine slides. It is it that ensures the maintenance of the entire valve system (bellows, spring, cap). If this part is dirty or distorted, the valve can no longer rise and descend freely, which brides the engine performance.
The OMP Ks-3x is not just a simple update, it's a total overhaul. With the adoption of the new standard FIA 8877-2022, OMP has noted the challenge of safety while drastically reducing the weight of the equipment. Winning 30% lightness Compared to previous models, this combination significantly reduces the driver fatigue during long races (endurance or complete days in KZ / OK).
New headset bag and Hans Arai For all type of rally, karting and automobile helmet. Allows you to store his helmet as well as his Hans and keep them well protected.
Cap for probe sleeve T ° C exhaust pot
This M10 cap will allow you to close the hole on your exhaust pot if you do not want to use your temperature sensor
Discover Sodi/Tekneex/Itaka compatible platelets at Magickart. Made by Sinter, these pads offer optimal braking performance and exceptional durability.
The Vertical Trolley Kart Holder with Casters is one ingenious solution To optimize the storage space and facilitate the transport of your Kart chassis. Designed to meet the needs of Drivers, mechanics and competition teams, this cart combines Robustness, practicality and mobility.
Thanks to his Four self-directional wheels, this trolley allows a fluid and effortless displacementeven in restricted spaces like stands or garages. Its Chromed steel structure guarantees a maximum stability and an durabilityeven in case of intensive use.
The Rotax EN 125 Max DD2 EVO is a karting engine Two times 125 cm³ very high level, designed for experienced drivers wishing to compete in National and international categories With a powerful, reliable and compliant motorization of competition standards. He is part of the engines family Rotax Max recognized worldwide for their reliability, technical innovation and broad adoption in racing series Rotax and other homologated championships.
Discover the Cobra 428 crown Ergal aluminum, compatible with all KZ chassis. Available in Ø40 mm or Ø50 mm, lightweight and resistant. Fast delivery on Magickart.eu.
Cap for Fuel Tank CRG, Intrepid, KG MI Cap for Fuel Tank CRG, Intrepid, NI
The Carburettor gasket 29 mm is specifically designed for post-2018 engine developments. It is placed between the carburetor body (usually the Tillotson HW-27A) and the admission flange. Its internal diameter of 29 mm is perfectly calibrated for not obstructing the passage of the gases and avoid any turbulence, thus guaranteeing a flow of laminar air and an instant engine response.
The NGK BR10EG spark plug (manufacturer's number 3830) is designed for karting engines, including IAME X30 and KA100 models. It features a 20.8 mm key opening, 14.0 mm external thread and 19.0 mm thread length. It features an SAE screw connection, 1.0 mm ignition position, nickel center electrode and single ground electrode. It also features 5 kOhm interference suppression and a flat gasket seat. Recommended for use in hot weather, it offers enhanced heat resistance. Order now on Magickart.eu.
TheX30 / KA100 valve mounting screws(mark #171 on the broken view of the X30 and #70 on the KA100) is asmall specific screwused forhold the valve boxon the engine crankcase. It ensures the strength of the fixing while guaranteeing thesealing of intake flowbetween the crankcase and the block valves.
The screw kit Arai is designed specifically for the generation of helmets GP6 (S, K and RC) as well as for the Karting model Sk6. Unlike universal kits, these components are machined with zero tolerance to ensure that your visor opens and closes with the characteristic fluidity of helmets. Arai.
This kit includes all the parts needed to attach a new visor or replace used by vibration and repeated handling in Paddock.
The IAME flavor box seal (format 90mm) is the element that ensures the airtight junction between the motor housing and the flap box. On a high-performance 2--time engine such as X30 or KA100, the slightest leak at this level (air intake) can make the carburetor adjustment impossible and cause a motor tightening risk by impoverishment of the mixture.
The tree is the spine of your rear train. This original model OTK (Tony Kart, Kosmic, wished) In 50 mm diameter is designed to provide the perfect balance between rigidity and flexibility. Its length of 1000 mm is the standard for categories KF / OK and Rotax, offering maximum versatility on the majority of circuits.
Karting tank OTK 8.5 L 2013 KF is specially designed for group competition karts OTK. This tank is compatible with a wide range of karts, including Tony Kart models, Carlos Sainz, Redspeed, Kosmic, virtually known, and many others. It is intended for the karts OTK Without gearbox, offering a capacity of 8.5 liters for optimal autonomy on the Pist
OTK axle Ø 50 x 1030 mm KZ karting, Karting spare parts, Karting accessories, Karting shaft, Karting performance, Karting reliability, Karting maintenance, Magickart.eu, Karting axle choice, Karting weather, Karting grip
The OTK MXC 130 mm magnesium rim , sold individually, is ideal for karting competition. Ultra-light and designed to dissipate heat, it improves grip and tire durability. Compatible with Tony Kart, Exprit, Red Speed, Kosmic and Carlos Sainz chassis.
The RIM OTK MXC 210 mm in magnesium is specially designed for karting drivers looking for optimal performance. Used in competition by the biggest teams, this rim offers excellent thermal dissipation, thus reducing the overheating of the tires and optimizing their life.
Pack of 6 Motul GP 2T cans for 2-stroke kart engines. High-performance synthetic oil, superior lubrication, clean combustion, improved performance. FIA-CIK approved. Magickart: competitive prices, serious customer service.
The IAME electric starter is an indispensable component for karting drivers equipped with Iame engines. Designed to ensure reliable and fast starts, this electric starter is made with robust materials for a long service life.
JOIN BOUCHON TO RESERVE CRG
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent