By buying this product you can collect up to 3 loyalty points. Your cart will total 3 points that can be converted into a voucher of €0.30.
The Birelart 80x180x16 Rear Brake Disk Kit is an essential set designed to replace bushings, clips, and washers of your Birelart rear floating disc. This kit is compatible only with the Birelart, RicCiardo chassis, Charles Leclerc, Kubica and LGK. It is crucial to check the status of your brake disc to ensure your safety.
| Feature | Description |
|---|---|
| Dimensions | 80x180x16 mm |
| Compatibility | Birelart Chassis, Ricciardo, Charles Leclerc, Kubica, LGK |
| Kit contents | 6 Axes D14 Birelart Disk Brake, 6 Clips 471 Birelart Brake, 6 Washers Axis Elastic Ring 14x22x0.3 Birelart Brake, 12 Belleville Washers Brake 14x20x05 Birelart |
| Utilization | Replacing the rear brake disc components |
The Birelart 80x180x16 Rear Brake Rear Brake Kit is ideal for use in karting competition, where safety and performance are crucial. It is also suitable for training sessions and intensive uses, offering a perfect combination of safety and durability.
Birelart 80x180x16 Rear Brake Disk Kit is an essential set for Birelart, RicCiardo, Charles Leclerc, Kubica and LGK chassis, offering a perfect combination of compatibility, safety and durability. With its dimensions of 80x180x16 mm, its compatibility with Birelart rear floating discs and its ease of installation, this kit is designed to meet the strictest requirements for safety and performance. Whether for the competition or training, the Birelart 80x180x16 Rear Brake Kit Kit is an ideal choice for karting drivers seeking to improve the safety and performance of their braking system.
The front brake clampMA20 KFis designed for competitive karts equipped with front braking systems (KF categories, KZ, etc.). Manufactured inaluminium forged high strength, it guarantees excellent rigidity and precise braking response.
Its finishblack anodizedensures lasting protection against corrosion and wear, while offering a sober and racing look.
Developed for intensive use in competition, this clamp significantly optimizes front braking, bringing more power, consistency and control.
RUBBER CAP ACCELERATOR CABLE 01476 DELL'ORTO (13) VHSH VHSB
The 50x80 model is designed for maximum stability and better thermal dissipation, ideal for demanding competition karts. Always check compatibility with your chassis and braking system
IAME X30 crankcase depression connection
Maxxis MA-F1 MR tyres are high performance CIK homologated kart racing tyres made for racing at highest level of karting competitions.
Optimum tyre pressures : 0,75-0,85 Bar (hot !)
This Male spherical ball of 8 mm diameter is the key element that connects your steering rods to the front column or rockets. As genericit was developed according to universal standards, which makes it Compatible with almost all karting chassis the market (leisure as competition).
Rocket guide washer 14x22.9x0.7 (10) Birelart
Do not replace the seals one by one if your pump is "spongy". The complete kit allows you to leave on a healthy basis.
Type content: The kit generally includes the piston, the primary cup, the secondary cup, the O-rings, the maintenance circlips and sometimes the protective bellows.
When to use it: As soon as you see a loss of constant pressure, an internal leak (the pedal drops gently under pressure), or after a long wintering where the liquid could crystallize.
Discover the KZ ERGAL 7075 T6 ø50mm BLACK ANODIZED crown at Magickart. Made of ERGAL 7075 with T6 treatment, this crown is ideal for competition karts.
The Brake Pads 2023 Front BirelArt 50x8 KZ EVO- Magickart For good braking use the brake pads BirelART
The tree is the spine of your rear train. This original model OTK (Tony Kart, Kosmic, wished) In 50 mm diameter is designed to provide the perfect balance between rigidity and flexibility. Its length of 1000 mm is the standard for categories KF / OK and Rotax, offering maximum versatility on the majority of circuits.
Karting tank OTK 8.5 L 2013 KF is specially designed for group competition karts OTK. This tank is compatible with a wide range of karts, including Tony Kart models, Carlos Sainz, Redspeed, Kosmic, virtually known, and many others. It is intended for the karts OTK Without gearbox, offering a capacity of 8.5 liters for optimal autonomy on the Pist
OTK axle Ø 50 x 1030 mm KZ karting, Karting spare parts, Karting accessories, Karting shaft, Karting performance, Karting reliability, Karting maintenance, Magickart.eu, Karting axle choice, Karting weather, Karting grip
The OTK MXC 130 mm magnesium rim , sold individually, is ideal for karting competition. Ultra-light and designed to dissipate heat, it improves grip and tire durability. Compatible with Tony Kart, Exprit, Red Speed, Kosmic and Carlos Sainz chassis.
The RIM OTK MXC 210 mm in magnesium is specially designed for karting drivers looking for optimal performance. Used in competition by the biggest teams, this rim offers excellent thermal dissipation, thus reducing the overheating of the tires and optimizing their life.
Pack of 6 Motul GP 2T cans for 2-stroke kart engines. High-performance synthetic oil, superior lubrication, clean combustion, improved performance. FIA-CIK approved. Magickart: competitive prices, serious customer service.
The IAME electric starter is an indispensable component for karting drivers equipped with Iame engines. Designed to ensure reliable and fast starts, this electric starter is made with robust materials for a long service life.
The Birelart 80x180x16 Rear Brake Disk Kit is an essential set designed to replace bushings, clips, and washers of your Birelart rear floating disc. This kit is compatible only with the Birelart, RicCiardo chassis, Charles Leclerc, Kubica and LGK. It is crucial to check the status of your brake disc to ensure your safety.
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent