(3) Rotax Cap Ø20 DIN443

€1.95
  Tax included
Reference: FR311.002

The Ø20 DIN443 cap (ref. 240182) is a metal closure plug with forced fit. Used on motor housings RotaxIt makes it possible to seal the machining orifices or foundry access which are not used after manufacture. Its design according to the norm Din443 Guarantees a perfect sealing to the projections of oil and dust, while offering a neat finish in the engine block.


 The product is in your cart now
Waiting...
Unable to Add to cart
  No items in stock

Full description: what is the purpose of this piece?

Even if it seems discreet, this small steel cup ensures key functions:

  1. Total sealing: Once implemented, this cap prevents oil vapor leaks from low engine and forbids foreign body inlet (dust, sand, gum) in the internal cavities.

  2. Friction maintaining: Its slightly curved shape allows for strength insertion (press-fit) which ensures that it remains in place despite the extreme vibrations of the engine at full load.

  3. Thermal resistance: Made in a treated steel, it supports the high temperature rise of the housing without expanding excessively or dislodge.

  4. Origin compliance: This is the exact room used by the BRP-Rotax To guarantee the integrity of your engine block Max or Dd2.


💡 Michel's trick

"This little cap is what is called a 'safety shutter'. If you notice that he oozes a little or he took a shot, do not leave him like that. If he jumps, it's the door open to all dirt in your lower engine! My advice: To install it correctly, uses a socket of the same diameter (Ø20) to type flat with a small mallet. If you tap in the middle with a screwdriver, you will deform it, it will flee and it will eventually fall. A fitting clean, it's the key for a motor that remains dry!"


🎓 Tuto: installation and replacement

  1. Housing cleaning: Before laying a new cap, clean the edge of the orifice perfectly with a degreaser. No trace of fat must remain on the contact area.

  2. Presentation: Place the hood straight on the orifice. The curved side must be directed outward.

  3. Emptyment: Using a bronze jet or a 20 mm bushing, hit gently and evenly. The cap must descend until you flush the housing or reach its abutment.

  4. Verification: Once posed, check that it is blocked. He should not be able to turn on himself by hand.


✅ Specifications

  • Diameter: 20 mm

  • Standard: DIN 443 (shutter cup)

  • Material: Zincled or treated steel

  • Compatibility: Rotax 125 Max, Junior, Senior, Master, DD2

Note Magickart: Room sold individually. Indispensable when a complete renovation of housing or following a shock that damaged the original shutter.

FR311.002
-3 Item

In the same category

Success 
Unable to Add to cart
Waiting...
This website uses cookies to ensure you get the best experience on our website.Learn more about cookies

User Area

Guest

Login/Register

Forgot your password?

Languages

Currencies

Languages

Currencies

My Cart

Your Cart is Empty
Cart 

Menu

Search

Our Terms

Terms of Service

In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION

In the following :

The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.

The Buyer designates the Seller's customers, whether they act as a professional or an individual.

 

Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE

These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.

They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").

In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.

Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.

The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.

 
Article 3: SPECIAL CONDITIONS OF SALE

The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.

 
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS

4.1. Product Features

The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.

4.2. Availability

The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.

The Seller reserves the right, at any time, to delete or modify a Product, without notice.

In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.

In the event of total or partial cancellation of the order:

- The order of the Buyer will be validated and his bank account will be debited for the entire order;

- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;

- The Buyer will be delivered Products available;

- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.

In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.

Rule 2

Here is the rule 2 content

Rule 3

Here is the rule 3 content