(19) Rotax Cylinder head O-ring 64x2mm

€3.34
  Tax included
Reference: fr328.007

The 64x2mm O-ring is the internal seal located between the dome of the cylinder head and the cylinder. Its precise dimensions (64 mm inner diameter and 2 mm thick) are designed to fit perfectly into the cylinder groove, preventing the cooling liquid from seeping into the combustion chamber.


 The product is in your cart now
Waiting...
Unable to Add to cart
  In stock

Cylinder head O-ring Rotax 64 x 2 mm - Origin

The Cylinder head O-ring Rotax (64 x 2 mm) is a certified original spare part, essential to ensure the perfect sealing of the combustion chamber of your engine Rotax Max. This seal ensures the critical separation between the cooling circuit and the combustion zone.

Made according to the rigorous specifications of Brp-RotaxIt offers exceptional resistance to internal pressures and repeated temperature cycles, thus avoiding compression falls or liquid infiltrations.

Technical specifications:

  • Brand: Rotax (Original piece).

  • Dimensions: 64 mm (diameter) x 2 mm (thickness).

  • Compatibility: Engines Rotax 125 Max, Junior, Senior, DD2 and Masters.

  • Material: High performance elastomer resistant to heat and chemical agents.

🎁 Magickart Fidelity Program: Using original parts Rotax, you preserve the value of your engine and cumulate loyalty For your future piston kits or revisions!


💡 The Michel Council (Magickart): the assurance of a healthy engine!

"On a Rotax, the tightness of the high engine does not support the cloud. My expert advice: This 64x2 mm seal is subjected to huge thermal stresses. A poor quality joint or reused harden, becomes brittle and eventually let the water pass into the cylinder.

The essential with your cylinder head gasket:

  • The inner O-ring (small diameter): Always replace both seals (interior and outdoor) simultaneously for homogeneous sealing.

  • Specific cooling liquid: Use a quality liquid to prevent premature corrosion of joint litters on the cylinder head.

  • Tightening to the couple: Always use a torque wrench by following the clamping order recommended by the manual Rotax.

A little secret of Pro: Before putting it, check that the throat of the cylinder head is perfectly clean. A simple dust or a calamine deposit can be enough to create a microe leak. At Magickart, we only go up from the origin to sleep on his two ears! "


🛠️ Mounting precautions

  1. Inspection: Visually check the seal before installation (absence of cuts or defects).

  2. Installation: Do not excessively pull the seal to put it in place, it could reduce its thickness and harm the seal.

  3. Lubrication: A very light application of silicone fat can help keep the gasket in its throat when turning the cylinder head.


Why choose Magickart for your parts Rotax ?

  • Origin guarantee: We provide exclusively the official brp-Rotax to guarantee technical compliance.

  • Availability: Critical part always in stock for an immediate expedition.

  • Expertise: We know the engines Rotax On the fingertips to advise you the best maintenance.

Your high-engine deserves the best. We add this original seal Rotax to your order?

fr328.007
7 Items

In the same category

This website uses cookies to ensure you get the best experience on our website.Learn more about cookies

User Area

Guest

Login/Register

Forgot your password?

Languages

Currencies

Languages

Currencies

My Cart

Your Cart is Empty
Cart 

Menu

Search

Our Terms

Terms of Service

In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION

In the following :

The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.

The Buyer designates the Seller's customers, whether they act as a professional or an individual.

 

Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE

These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.

They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").

In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.

Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.

The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.

 
Article 3: SPECIAL CONDITIONS OF SALE

The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.

 
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS

4.1. Product Features

The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.

4.2. Availability

The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.

The Seller reserves the right, at any time, to delete or modify a Product, without notice.

In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.

In the event of total or partial cancellation of the order:

- The order of the Buyer will be validated and his bank account will be debited for the entire order;

- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;

- The Buyer will be delivered Products available;

- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.

In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.

Rule 2

Here is the rule 2 content

Rule 3

Here is the rule 3 content