By buying this product you can collect up to 12 loyalty points. Your cart will total 12 points that can be converted into a voucher of €1.20.
Make your safety and comfort on the track with the new protection vest Sparco SJ PRO-K3. Specially designed for karting practice, this model combines advanced technology with a new modern graphics.
The SJ Pro-K3 is ultra-effective against shocks and vibrations transmitted by the kart chassis. It absorbs the energy of repeated impacts against the tub, thus protecting your ribs and your back.
Thanks to his ergonomic form and new materials developed by Sparco, this vest offers an excellent level of protection without hindering your movements. It allows you to keep a good level of comfort while being properly protected.
Optimal ventilation: The outer materials allows to circulate the air, ensuring a better ventilation even under the combination.
Targeted padding:
12 mm on the ribs for maximum protection of sensitive areas.
6 mm on the shoulders for comfortable cushioning.
4 mm in the back, studied to be comfortable in a driving position.
Ease of use: Equipped with a zipper on the front, it is moving up and withdraws very easily.
Use: Karting (leisure and competition.)
Technology: High efficiency protection against shocks and vibrations.
Materials: New materials Sparco, external fabric ventilated.
Closing: Front zip.
Design: New modern graphics.
Homologation: Complies with karting safety standards.
"Michel, our expert in equipment, recommends: To be effective, a protection vest must be perfectly adjusted, like a second skin. It must not move during the pilotage. Remember to take your measurements with your karting combination or a similar thickness to choose the good size in the table below. If you are between two sizes, prefer the lower size for better maintenance."
⚠️ Security Council: Check the status of your protection vest before each output. If the vest has undergone a significant shock or has signs of wear or deformation of the foam, it is imperative to replace it to guarantee your safety.
Order your protection vest Sparco SJ PRO-K3 now on Magickart.fr for a safe season. Fast delivery.
To choose the ideal size, measure your chest tower to the strongest place.
| Waist vest | Chest Tower (CM) | Approximate age |
| 120 CM | 60-63 CM | 6-7 YEARS OLD |
| 130 CM | 64-67 CM | 8-9 YEARS |
| 140 CM | 66-71 CM | 10-11 YEARS OLD |
| Waist vest | Chest Tower (CM) |
| XS | 86-89 CM |
| S | 94-97 CM |
| METERS | 102-105 CM |
| THE | 110-113 CM |
| XL | 118-121 CM |
| XXL | 121 + CM |
Note: Ideal for karting.
| Feature | Detail |
| Product type | Protective vest / Plastron |
| Utilization | Karting |
| Model | SJ PRO-K3 |
| Mark | Sparco |
| Public | Child and adult (depending on size) |
| Composition | Composite materials / Absorbent foam |
| Maintenance | Hand Wash Good, Drying Flat |
| Maker | Sparco S.p.A, Via leini 524, 10088 Volpiano (TO) - Italy |
| Contact Manufacturer | info@sparco.it |
| Legal opinion | [Lien vers votre page d'avis juridique si nécessaire] |
| Age restriction | Any |
| SKU | See variant (ex: 002345xxsnr) |
| State | Nine |
| Key feature 1 | High efficiency shocks / vibrations |
| Key feature 2 | Ventilated materials |
Offer a new heart to your factory mechanics through TM KART official cylinder for KZ-R3 engine in standard version. Central part of the Italian brand's 6-speed block 125cc, this original replacement cylinder guarantees perfect manufacturing tolerances and strict compliance with the official certification sheet.
Molded in an aluminum alloy with high thermal conductivity and coated with a surface treatment at Ultra-resistant nicaSilThis standard cylinder offers scanning and admission diagrams / exhaust developed by the TM Course service. It ensures exceptional volumetric yield, a massive couple from the mid-diets and an incomparable length at the end of straight line. Whether to replace a used, damaged cylinder or simply to have a new backup high-engine with factory standards, this part is the guarantee of optimal reliability and performance
Go to the upper level of the competition with the TM Kart KZ-R3 Official Cylinder in Full Black Version Prepared. Designed for the most demanding pilots and preparers, this exceptional cylinder combines the aesthetic finish "Full Black" factory with a pushed preparation work of intake and exhaust ducts.
In addition to its aggressive look resolutely "Factory", the finish Full Black Provides specific thermal surface treatment that promotes calorie evacuation to the cooling circuit. Side performance, the version Prepared Enjoys a careful retouching of the opening diagrams, a perfect alignment of the transfers and optimized polishing of the exhaust light. The result? An increased scanning speed, maximum filling of the high engine, more torque to mid-speed and a turning tricks at high speed to make the difference in qualification and final.
Guarantee a perfect lock and surgical disengagement on your high-engine thanks to the Official TM Kart Clutch Press Tray Designed for KZ-R3 Engine. Mistress transmission part, this pressure plate applies the radial strength of the springs on the stack of the stacked discs and smooth to transmit the entire power of the block R3 to the gearbox.
Machined in a high rigidity aluminum alloy, this presser tray benefits from a geometry reworked by the TM KART race service exclusively dedicated to the KZ-R3 generation. It avoids any deflection under stolen departures or on the fly passages, ensuring instant biting without residual skating. Its perfectly flat friction surface and anti-friction treatment extend the lifetime of your clutch discs and ensure absolute constancy, handle after handle.
Equip your kart with the summum of group braking technology OTK. This original BWD rear caliper is the new standard set in series on all chassis of the group OTK (Tony Kart, Kosmic, Exprit, Redspeed, EOS, GILLARD) from the 2025 season.
The Mychron 6 2T is the new reference of data acquisition systems for karting. More powerful, faster and more connected than his predecessor, The Mychron 6 is designed for drivers that require the best. This "2T" version allows the management of two temperatures motor simultaneously.
Optimize the transmission of your engine with the Clutch wreath 70 teeth TM R3. Specific original room (Caution: Not compatible with TM KZ R2 and previous models).
Protective vest for karting with new graphics.
Very effective model against shocks and vibrations.
This new vest allows you to keep a good level of comfort while protecting properly.
The outer materials allows to circulate the air for better ventilation.
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent