SINTER brake pad set - Mach1 kart

Optimize the braking of your chassis with the sINTER brake pad set (sintered metal), specially designed and developed for braking braking systems brand Mach1 kart.

Recognized for their exceptional biting and their formidable resistance to the Fade (loss of efficiency due to heat), these sintered platelets guarantee an ultra-powerful, constant and endangered braking, essential for the high-level competition as for the leisure sportsman.

ℹ️ Dimensions of the wafer:

• Height (h:) 38.5 mm

• Length (L:) 95.2 mm

• Thickness: 16.5 mm

Description and technical characteristics

• Part type: Sintered brake pads (SINTER.)

• Compatible brand / Model: Specific for chassis Mach1 kart.

• Dimensions: 38.5 x 95.2 x 16.5 mm.

• Material: Sintered metal (sintered) high performance, offering a high friction coefficient even at very high temperature.

• Packaging: Full game for a caliper.

📖 History and braking technology SINTER

In karting, the braking system is subject to extreme thermal and mechanical stresses. As a tight turn end of the straight line, the brake discs can blush in seconds under the effect of brutal decelerations.

The "SINTER" (or sintered) type pads are made by compacting high pressure and high temperature metal powders. Unlike traditional organic platelets, the sintered material supports colossal operating temperatures without melting or losing biting. Adopted by the best competition teams, they provide a "touch" direct brake and a remarkable constancy of the first to the last round, regardless of the weather conditions.

🔧 Michel's trick

"Michel, our technical expert, recommends you: when replacing your SINTER pads on your Mach1 kart, take the time to carefully clean the stirrup and push the pistons well flat. Do not forget to perform a progressive break-in. Some track towers: Try trapper braking as soon as the pre-grid is exit. A good break-in allows the pads to apply perfectly to the friction track of your disk and guarantees an immediate maximum power. Regularly monitor the thickness of the trim: worn platelets beyond the safety limit generate excessive heat in the brake fluid. "

⚠️ Security Council: Braking is the vital organ of safety on your karting. Always check the status of the safety pins, the liquid level and the absence of leakage at the caliper seals before each rolling session.

Order your SINTER brake pad set for Mach1 Kart now on Magickart.fr to repel your braking points safely. Fast shipping.

❓ FAQ: your frequent questions

Q: Do the SINTER platelets require a particular heating time ?

A: Yes, the sintered metal platelets offer a formidable efficiency, but they usually require a heating lathe or a slight braking of amadouption to give their full extent to soft trimming trimming.

Q: Are these platelets compatible with all Mach1 kart models ?

A: They are designed for stirrups using the standard dimension dimension 38.5 x 95.2 x 16.5 mm on the Mach1 chassis. It is always recommended to measure your old used platelets to validate the exact match with your assembly.

Q: Does the braking sinter use the discs faster ?

A: Due to their harder and more abrasive metal composition than the organic packs, the SINTER platelets can actually increase the natural wear of the brake discs, in return for a power and an incomparable braking longevity in the race.

📋 Product Information (GPSR) & Technical Summary