(25) Right Water Fitting Max Motor Cart

€5.10
  Tax included
Reference: FR402.000

The Right water fitting (ref. 224094) is the threaded tip that attaches directly to the motor housing to allow the cooling hose connection. Made of treated steel or brass according to the series, it ensures a passage of constant flow to the water pump. Its "right" design is standard on the majority of montages Rotax To facilitate the path of the hoses along the chassis.


 The product is in your cart now
Waiting...
Unable to Add to cart
  In stock

Full description: sealing and flow

Why look after the condition of this fitting?

  1. Precision thread: The thread is designed to fit perfectly with the aluminum housing of the Rotax without risk deteriorating, provided the tightening torque respect.

  2. Anti-slip lip: The end of the fitting has a shoulder (bead) that prevents the hose from slipping or disgusting under the effect of circuit pressure (about 1 bar) and vibrations.

  3. Corrosion Resistance: Treaty against oxidation, it does not go to prolonged contact of the coolant or additives.

  4. Flow optimization: Internal bore is polished to minimize turbulence and ensure that the water pump always receives the necessary flow.


💡 Michel's trick

"It is often by that that the little invisible leaks begin! My advice: During the installation, do not use plumbing teflon that ends up fraying in the engine. A little of High temperature silicone seal paste On the threads is enough for a perfect seal. And attention to the hose clamp: Do not tighten it as a wild on the fitting, you may 'mark' the metal or weaken the hose in the long run. If you see green (limestone / antifreeze) around the threading is that it's time to disassemble it and redo the tightness! "


🎓 TUTO: installation and connection

  1. Preparation: Clean the female thread in the engine crankcase. Make sure no former joint debris remains at the bottom.

  2. Screwing: Progress the hand connector. He must screw himself effortlessly on several turns. Complete the tightening with a suitable flat wrench, without forcing over measurement (the aluminum of the housing is fragile).

  3. DURITY CONNECTION: Press the hose thoroughly until the stop of the fitting.

  4. Securing: Use a quality clamp (preferably stainless steel) to maintain the hose. Check the tightness after the engine is mounted in temperature.


✅ Features

  • Reference Rotax : 224094

  • Form: Right

  • Material: Zinc / brass steel

  • Compatibility: Rotax 125 Max (Micro, Mini, Junior, Senior, Master) and EVO versions.

Note Magickart: Sold individually. Indispensable piece for any reconstruction or change of crankcase.

FR402.000
1 Item

In the same category

This website uses cookies to ensure you get the best experience on our website.Learn more about cookies

User Area

Guest

Login/Register

Forgot your password?

Languages

Currencies

Languages

Currencies

My Cart

Your Cart is Empty
Cart 

Menu

Search

Our Terms

Terms of Service

In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION

In the following :

The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.

The Buyer designates the Seller's customers, whether they act as a professional or an individual.

 

Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE

These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.

They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").

In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.

Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.

The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.

 
Article 3: SPECIAL CONDITIONS OF SALE

The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.

 
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS

4.1. Product Features

The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.

4.2. Availability

The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.

The Seller reserves the right, at any time, to delete or modify a Product, without notice.

In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.

In the event of total or partial cancellation of the order:

- The order of the Buyer will be validated and his bank account will be debited for the entire order;

- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;

- The Buyer will be delivered Products available;

- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.

In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.

Rule 2

Here is the rule 2 content

Rule 3

Here is the rule 3 content