• New

SKF 6302 TN9 / C3 Bearing

€6.89
  Tax included
Reference: SKF6302.TN9C3

The SKF 6302 TN9 / C3 Bearing (-dimensional 15 x 42 x 13 mm) is one of the most technical components of internal sanding. Its design combines a fiberglass reinforced polyamide cage (Tn9) and an increased radial internal game (C3). This specification is crucial for competition engines because it helps with very high rotational regimes while minimizing the power losses by friction.


 The product is in your cart now
Waiting...
Unable to Add to cart
  No items in stock
You have to agree with out GDPR policy
Email address is missing Wrong email address


🏎️ Full description: the SKF technological advantage

Why is this bearing so popular for low engine Rotax ?

  1. Cage TN9 (polyamide 66): Unlike metal cages, the TN9 cage is lighter and offers a better coefficient of friction. It is also more resistant to brutal acceleration and deceleration (very common in karting).

  2. Game C3 (high speed): This additional internal game is essential to compensate for the thermal dilatation of the tree and the crankcase. Without this game C3, the bearing may bride hot, causing a mechanical case.

  3. Quality SKF Explorer: This range represents the top of global accuracy. It guarantees silent operation, a reduction in vibrations and extended life, even under intense charges.

  4. Mechanical fluidity: By releasing the constraints on the balancing or transmission shaft, you make it easy to take the turn of your engine.


💡 Michel's trick

"The SKF in TN9 / C3, it's a bit the 'roll' of the box bearing! CAUTION However: the polymer cage (plastic) does not like the ultra-aggressive solvents or the heating on the flusher. My advice: for the mount like a pro, put the bearing in the freezer and heat the housing cleanly 80 ° C.. The bearing must be installed without any force. And if you see that the plastic cage starts to yellow or become brittle on an old bearing, do not look, change it to the direct before it explodes in the gables! "


🎓 Tuto: installation and maintenance

  1. Preparation: Clean the housing housing. Check that the range of the shaft (15mm) is not marked or worn.

  2. Insertion: Use a socket that supports exclusively On the outer roller ring to insert it into the crankcase. Never tap on the inner ring!

  3. Lubrication: Once in place, soak it with box oil XPS (red oil Rotax). The TN9 cage must always be lubricated to maintain its flexibility.

  4. Replacement frequency: Intensive use, a check at each revision of 25 hours is recommended. At the slightest "scrap", the replacement is mandatory.


✅ Features

  • Brand: SKF (Made in Italy / France)

  • Type: 6302

  • Dimensions: 15 mm (Int.) X 42 mm (ext.) X 13 mm (Ep.)

  • Specificities: CAGE TN9 (POLYAMIDE) / GAME C3 (Large)

  • Compatibility: Rotax 125 Max, Junior, Senior, Master, Evo, DD2.

Note Magickart: Sold individually. This is one of the best investments to make your low drinking and optimize your mechanical performance.

SKF6302.TN9C3
0 Item

In the same category

This website uses cookies to ensure you get the best experience on our website.Learn more about cookies

User Area

Guest

Login/Register

Forgot your password?

Languages

Currencies

Languages

Currencies

My Cart

Your Cart is Empty
Cart 

Menu

Search

Our Terms

Terms of Service

In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION

In the following :

The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.

The Buyer designates the Seller's customers, whether they act as a professional or an individual.

 

Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE

These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.

They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").

In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.

Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.

The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.

 
Article 3: SPECIAL CONDITIONS OF SALE

The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.

 
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS

4.1. Product Features

The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.

4.2. Availability

The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.

The Seller reserves the right, at any time, to delete or modify a Product, without notice.

In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.

In the event of total or partial cancellation of the order:

- The order of the Buyer will be validated and his bank account will be debited for the entire order;

- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;

- The Buyer will be delivered Products available;

- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.

In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.

Rule 2

Here is the rule 2 content

Rule 3

Here is the rule 3 content