8x57x20 cylinder stud Rotax Max (26)

€3.35
  Tax included
Reference: FR329.003

The 8x57x20 cylinder stud (ref. 940787) is a high precision threaded rod essential to secure the cylinder with the motor-casc crank. With a diameter M8, a total length of 57 mm and a threaded part of 20 mm Destined to spill in the housing, it is designed to support extreme thermal and mechanical stresses during combustion.


 The product is in your cart now
Waiting...
Unable to Add to cart
  No items in stock

Full description: Why is quality vital?

A stud is not a simple screw; It is the guarantor of your engine tightness:

  1. Compression stability: By maintaining a constant pressure on the base gasket, it avoids gas leaks and power losses.

  2. High resistance steel: Unlike standard threaded rods, this stud is treated not to lie under the effect of heat and repeated explosions in the combustion chamber.

  3. Precision thread: The 20 mm portion ensures maximum plug in the aluminum of the housing, minimizing the risk of tearing from the nets.

  4. Technical compliance: Party-building room, it respects the exact dimensions for passing the cooling ducts and the cylinder alignment.


💡 Michel's trick

"The stud is the spine of your engine! My old mechanical board: when you go back to the crankcase, uses Strong net brake (Loctite red) So that they do not come with the nut at the next disassembly. And above all, respects the tightening torque of the cylinder head: 24 nm, no more, no less! If you're going too hard, you'll stretch the stud or worse, distort your cylinder. If a stud is twisted or if the thread is tired ', does not play with fire, change it. A loose stud in the race, and it's the complete engine that ends up with the trash! "


🎓 Tuto: assembly and recommendations

  1. Cleaning the wells: Before inserting the new stud, clean the thread in the housing with the brake cleaner and dry to the blower.

  2. Nut / counter-nut method: To screw the stud into the housing without damaging the upper thread, use the technique of the nut and lock lock blocked against each other.

  3. Depth of taking: Make sure the 20 mm portion is fully engaged in the engine crankcase.

  4. VERIFICATION OF PLAINITY: Once the four studs are placed, check that they are perfectly perpendicular to the housing seal plane.


✅ Features

  • Reference Rotax : 940787 (sometimes listed under X940786)

  • Dimensions: M8 x 57 mm (total length) x 20 mm (Carter thread)

  • Material: High performance tempered steel

  • Compatibility: Rotax 125 Max, Junior, Senior, Master, Evo.

Note Magickart: Sold individually. A complete engine requires 4 studs. We recommend replacing them with a complete batch in the case of major revision of the low engine.

FR329.003
-2 Item

In the same category

This website uses cookies to ensure you get the best experience on our website.Learn more about cookies

User Area

Guest

Login/Register

Forgot your password?

Languages

Currencies

Languages

Currencies

My Cart

Your Cart is Empty
Cart 

Menu

Search

Our Terms

Terms of Service

In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION

In the following :

The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.

The Buyer designates the Seller's customers, whether they act as a professional or an individual.

 

Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE

These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.

They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").

In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.

Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.

The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.

 
Article 3: SPECIAL CONDITIONS OF SALE

The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.

 
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS

4.1. Product Features

The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.

4.2. Availability

The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.

The Seller reserves the right, at any time, to delete or modify a Product, without notice.

In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.

In the event of total or partial cancellation of the order:

- The order of the Buyer will be validated and his bank account will be debited for the entire order;

- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;

- The Buyer will be delivered Products available;

- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.

In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.

Rule 2

Here is the rule 2 content

Rule 3

Here is the rule 3 content