TMKART Exhaust Manifold KZ10B-R1-R2-R3 D2 29
This D2 special exhaust pipe has an internal diameter of 29 mm. In the hierarchy of the TMKART exhaust settings, the passage to the diameter 29 mm (against the 28 mm standard) is a strategic modification
This D2 special exhaust pipe has an internal diameter of 29 mm. In the hierarchy of the TMKART exhaust settings, the passage to the diameter 29 mm (against the 28 mm standard) is a strategic modification
This D2 special exhaust pipe has an internal diameter of 29 mm. In the hierarchy of the TMKART exhaust settings, the passage to the diameter 29 mm (against the standard 28 mm) is a strategic modification:
By expanding the conduit, the back pressure is decreased at the outlet of the cylinder. This allows the engine to take its tricks more freely and to win in extends In long lines straight. This is the ideal component for fast circuits where the peak speed is the key factor.
Gain at the top regime: Free the flow of burned gases for better breathing of the engine beyond 14,000 rpm.
Architecture D2: System with 2 springs allowing a flexible bond with the pot, limiting the risk of cracking of the flange under the effect of vibrations.
Total compatibility: Fit perfectly on the engines KZ10B, R1, R2 and the last R3.
Racing machining: Smooth internal finish to minimize turbulence and optimize the venturi effect to the pot.
"The manifold of 29 mm, it is for the circuits where you remain welded '! My advice: If you roll on a very technical track with lots of pins, stay on 28. But if you go on a quick route, the 29 mm will breathe your R2 or R3 like never. Small trick: Caution, changing the diameter of the pipe, you modify your exhaustion slightly. Check your carburation after the first rolling, because the engine can request a gasoline fillet up to top to compensate for this flow gain! "
Sealing: As with all exhaust parts, editing must be done with a 7 hole seal and a high temperature silicone paste.
Alignment: Check that the pot is perfectly binding on the 29 mm ball without excessive side stress on the springs.
Interview: Inspect the spherical range. With the diameter 29, the contact surface is slightly different; Make sure it remains well greased (copper grease).
Brand: Tmkart (origin).
Model: Special D2 (fixing 2 springs).
Internal diameter: 29 mm.
Motor compatibility: TM KZ10B, KZ10C, R1, R2, R3.
Material: CNC machined high density high density foundry aluminum.
Performance Specialist: We offer all the variance of flanges (28 mm, 29 mm) for your settings.
Delivery protection more: Packed specifically to protect the ball and joint planes.
TMKART Expertise: The certainty of having an official piece consistent with the latest factory changes.
Note Magickart: Switch on a 29 mm collector is a motor preparation step. Make sure your exhaust pot is also in perfect condition to exploit this gain in diameter.
Terms of Service
In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION
In the following :
The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.
The Buyer designates the Seller's customers, whether they act as a professional or an individual.
Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE
These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.
They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").
In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.
Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.
The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.
Article 3: SPECIAL CONDITIONS OF SALE
The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS
4.1. Product Features
The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.
4.2. Availability
The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.
The Seller reserves the right, at any time, to delete or modify a Product, without notice.
In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.
In the event of total or partial cancellation of the order:
- The order of the Buyer will be validated and his bank account will be debited for the entire order;
- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;
- The Buyer will be delivered Products available;
- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.
In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.
Here is the rule 2 content
Here is the rule 3 content