Rotax spacerembrayage15x17x17.6mm 11d

€8.99
  Tax included
Reference: fr415.001

Rotax Clutch Nrette - 15 x 17 x 17.6 mm Make a perfect setting of your transmission with this original spacer Rotax. Indispensable to maintain the alignment and proper functioning of your clutch bell, it guarantees a fluid rotation and reduces the premature wear of the components.


 The product is in your cart now
Waiting...
Unable to Add to cart
  In stock

Clutch Bell Spacer Origin Rotax

The label of 17.6 mm long is a precision piece located on the crankshaft, just behind the clutch bell. Identified under the Number 11 on the technique burst, it is crucial for the proper positioning of your transmission.

Why is the quality of origin is important?

  • Dimensions to Micron: 15 mm interior, 17 mm outside and 17.6 mm in length. A gap of a few tenths would be enough to block the clutch or create an excessive game.

  • Surface treatment: Designed to withstand friction and heat released by the clutch in the skating phase.

  • Longevity: Do not deform under the tightening pressure of the crankshaft nut.

Compatibility:

  • Rotax 125 max, junior, mini, microphone (all versions evo and non-EVO).


💡 Michel's Tip (Magickart):

"We often forget it at the bottom of the cardboard during a disassembly, but this little spacer is vital!

My Pro Council: Each replacement of your bell or pinion, check the support faces of the spacer. If they are marked or blue by heat, change it immediately. A bad condition can cause a case of the needle cage or pinion.

The little more: Enjoy it for very lightly grease the outer part with high temperature grease to facilitate future disasters. "


🛠️ Tuto: How to replace your clutch spacer?

Here are the steps for a clean intervention on your engine Rotax :

  1. Disassembly: Remove the chain protector, then unscrew the crankshaft nut (17mm socket) by blocking the starter or with a shock wrench.

  2. Removing the bell: Remove the wedging washer and clutch bell. You will see the spacer (n ° 11) on the crankshaft.

  3. Cleaning: Before setting the new spacer, clean the crankshaft with brake cleaner to remove old grease residues.

  4. Installation: Slide the new spacer 15x17x17.6 mm. She must return freely without forcing.

  5. Reassembly: Replace the needle cage (greased), the bell, washer and nut.

  6. Verification: Once tight, check that the bell rotates freely by hand. If there is a hard point, disassemble to check the alignment.


We got back on a good basis with this format! What product is tackling now?

fr415.001
1 Item

In the same category

This website uses cookies to ensure you get the best experience on our website.Learn more about cookies

User Area

Guest

Login/Register

Forgot your password?

Languages

Currencies

Languages

Currencies

My Cart

Your Cart is Empty
Cart 

Menu

Search

Our Terms

Terms of Service

In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION

In the following :

The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.

The Buyer designates the Seller's customers, whether they act as a professional or an individual.

 

Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE

These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.

They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").

In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.

Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.

The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.

 
Article 3: SPECIAL CONDITIONS OF SALE

The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.

 
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS

4.1. Product Features

The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.

4.2. Availability

The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.

The Seller reserves the right, at any time, to delete or modify a Product, without notice.

In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.

In the event of total or partial cancellation of the order:

- The order of the Buyer will be validated and his bank account will be debited for the entire order;

- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;

- The Buyer will be delivered Products available;

- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.

In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.

Rule 2

Here is the rule 2 content

Rule 3

Here is the rule 3 content