By buying this product you can collect up to 6 loyalty points. Your cart will total 6 points that can be converted into a voucher of €0.60.
The Radiator AF Crown Protection in 220 mm is the indispensable ally of winding tracks or categories requiring a large number of teeth. Wider than the standard model, it is specially designed to wrap the crowns from 76 to 85 teeth.
Machined in high quality aluminum, it acts as a real shield between your transmission and external aggression (prominent vibrators, debris, track outputs). Its robustness avoids that the crown does not go to the slightest impact, thus saving expensive chain breaks.
Adapted to the major reports: The diameter of 220 mm ensures that the protection slightly protrudes from the crown (76-85 teeth), touching the soil before the ring of the crown.
Aluminum Quality Aviation: Offers exceptional impact resistance while remaining light enough not to penalize the inertia of the back tree.
Anti-derailment: By framing the crown, it limits the side movements of the chain during the heavy twists of the chassis.
Durability AF Radiator: An irreproachable finish for an accessory that lasts several seasons.
"Skip to a 80-tooth crown without protecting in 220 mm, it's like rolling without headphones: it's risky! My Pro Council: Watch the wear of the disc edge. The trick: If you see that aluminum is very marked below, it's because it did its job and saved your channel. Warning: With a 220 mm disk, your ground clearance is reduced. Make sure your chassis is not set too low at the back, otherwise you are going to pivot 'on the disc in the bumpy turns, which can make you lose motricity. "
200 mm version: For crowns of 62 to 75 teeth.
Version 220 mm (this one): For crowns of 76 to 85 teeth. Indispensable in minimal / cadet category or very slow circuits.
Brand: AF RADIATOR.
Diameter: 220 mm.
Material: High strength aluminum.
Compatibility: Universal (standard holes for wreaths Ø 50mm).
Weight: Optimized for the competition.
Q: Can I use a 220 mm protection with a small crown of 65 teeth? A: Yes, it's technically possible, but you will unnecessarily lose the ground clearance. It is better to match the diameter of the disc at the waist of the crown.
Q: Are the fixing screws provided? A: Generally, the protection is fixed with the hardware already present on your crown holder. If your screws are too short, we offer elongated hardware kits.
Expertise Transmission: We know the constraints of each circuit.
Quality AF Radiator: The guarantee of a proven product at the highest level.
Driver customer service: A question about your transmission report? We answer you live.
The Karting Crown Range 219 large model is a Chromed steel sprocket support, designed for Ranger and transport easily The pine nuts 215 and 219. This accessory is indispensable for drivers, mechanics and karting teams, offering a optimal organization gables and a quick access during settings or changes on the track.
Made in High resistance chrome steel, this support allows Store several gears simultaneously, thus avoiding any confusion and Valuable time saving During preparations or repairs. Thanks to his circular provision, each pinion is Immediately identifiable, which facilitates rapid and effective changes.
Replacement pin for karting chain extractor 219 and 428
Hornet Line 219 ERGAL crown, lightweight and high quality. Weight gain from 30g to 60g depending on height. ERGAL alloy for robustness and durability. Climb to rear axis, perfect rotation, optimal alignment with motor sprocket. Sizes from 67 to 91 teeth. Premium brand for karting. Distributed by Magickart. Reactive VAS and competitive prices.
This treated steel crown is designed for demanding transmissions using achain in step of 428(wider and more robust than standard 219). That you drive on a chassis with a tree of30 mmor40 mm, this crown offers exceptional longevity, ideal for intensive leisure or 4-stroke motors and rental karts.
Discover the KZ ERGAL 7075 T6 ø50mm BLACK ANODIZED crown at Magickart. Made of ERGAL 7075 with T6 treatment, this crown is ideal for competition karts.
Cobra Electra sprocket in anodised 7075-T6 Ergal: openwork, lightweight, for competition karting.
Rotax M28 x 1 pinion nut - Origin Builder Magickart offers this original sprocket nut Rotax, essential for the secure maintenance of your transmission. With its m28x1 thread, this official spare part guarantees maximum resistance and perfect alignment. Choosing the origin is to ensure total compatibility and flawless security on the track.
Pair of OTK BSD 2017 rear brake pads for KF and KZ karts. Supplied in sets of 2, at the best price at Magickart.
Weights are already separated, complete with high seal adhesive.
Total weight 60gr - It is composed of: - 4 pcs 5gr - 4pcs 10gr
The Rotax Max Evo engine is distinguished by its power, thanks to the VHSB "XS" carburettor and its electronic exhaust valve. It is also perfect for leisure, offering spaced maintenance and very easy use.
The KF karting full chain shield is an essential accessory to ensure the safety of drivers and competitors in case of chain breakage. Available in red or black, this high quality product is made of lightweight and durable plastic. Designed to be easily assembled and disassembled, it allows quick access to the chain for lubricating and maintenance.
The Red Bull Racing backpack MV1 is an indispensable accessory for all enthusiasts of the famous stable. Practical, robust and sports design, it is suitable for both school and for daily trips or outdoor activities.
The KG BOOSTER air box is one of the most successful on the market, specially designed to offer a maximum air flow While respecting the FIA standards in force.
Equipped with Internal filter PO37 sprintIt guarantees an extremely low pressure drop, allowing the engine to breathe fully and to express its potential, both on the boxes with box (Kz) and on the mono-speed categories (OK - OKJ - OKNJ).
Thanks to his Innovative internal design, the KG Booster combines performance, noise reduction, particle control, and Optimization of the airflowWhat makes it a reference for competitors looking for the best of Italian technology kg.
Discover this Exclusive Burago Pack including 4 monoplaces of Formula 1 at 1/43 scale, representing some of the most emblematic pilots of the current grid. An ideal set for collectors, F1 enthusiasts or to offer a complete and spectacular gift.
The Special bridle rear bumper Ø30mm aluminum cobra is designed for Hold your bumper firmly during karting races, even in case of violent shocks with your opponents. Made in High strength aluminum, this flange offers a Robust and light solutionideal for Protect your kart Without weighing your chassis.
Take an essential garment and give it a real touch of racing. No clothing will accompany you as far and in as many circumstances as the classic T-shirt, so make sure it reflects your passion while highlighting you. The Scuderia T-Shirt Ferrari RP Team Tee is a must for all Scuderia fans Ferrari.
Take an essential garment and give it a real touch of racing. No clothing will accompany you as far and in as many circumstances as the classic T-shirt, so make sure it reflects your passion while highlighting you. The Scuderia T-Shirt Ferrari RP Team Tee is a must for all Scuderia fans Ferrari.
The rear brake disc OTK Ø180x13mm self-ventilated BWD is a high-end component, specially designed for Group Karts OTK from 2025 (Tony Kart, Kosmic, Redspeed, virtually known, Carlos Sainz, Gillard, etc.). This disc self-ventilated offers a optimal braking powera exceptional durability and an Resistance to thermal and mechanical stresses, essential for competitive performance.
Made in Treated and treated steelthis disc is Optimized for active cooling, thanks to his Integrated ventilation fins, which allow a rapid dissipation of heat. This guarantees a Constant and reliable brakingeven during the most intense sessions.
The OTK 50 mm 180x13 Magnesium - BWD brake disc holder, new 2025, is an essential part for chassis from the OTK group, including Tony Kart, Kosmic, Exprit, Carlos Sainz, EOS, and Red Speed. Here's some more information on this product:
The Crown protection AF Radiator is a essential accessory For all Karting pilots concerned with protect their transmission against shocks, projections and premature wear. In Two different diameters (200 mm and 220 mm), this protection in Ultra-resistant aluminum is specially designed for Preserve the chain and pinion of your kart, while guaranteeing a exceptional durability.
Whether you are a competition pilot or a passionate amateur, this protection is a wise investment for prolong the life your mechanical components and Avoid expensive breakdowns in full race.
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent