Rotax BHC screws of m3x6 slats

No reward points for this product.

En cliquant vous allez être redirigé vers le site sécurisé de notre partenaire SOFINCO

Product Details

Reference RX240351

In stock 10 Items

Specific References

Product Comments

Comments (0)

in the same category

€6.20

Rotax

(3) Rotax exhaust valve stud - 6 x 30.5 x...

Rotax exhaust valve stud - 6 x 30.5 x 12 mm Guarantee the fluid movement of your valve with this original stud Rotax. With its precise dimensions of 6x30,5x12 mm, it ensures a perfect guidance of the guillotine, avoiding any blocking and optimizing the performance of your engine to all the regimes.

€34.99

Rotax

ROOTTLE (PIPE) EXHAUST 2014 Rotax

Room Original Rotax Manufacturer

The 2014 Rotax Exhaust Rotube (Pipe) is an essential part of the MAX motor exhaust system. It looks between the cylinder and the exhaust pot while allowing controlled flexibility to absorb the motor vibration.

Designed according to the manufacturer specifications, it guarantees precise mounting, a perfect sealing and optimal operation in competition as in training.

€15.84

Rotax

Rotax membrane de guillotine

€0.65

Rotax

Rotax BTR M6x25mm screw (14) (7)

The BTR M6x25mm screw (or chc - hollow hex cylindrical screw) is one of the most used hardware on the engines Rotax. Its length of 25 mm and its thread M6 Make it a versatile screw, mainly used for the assembly of the housings, to the attachment of certain periphery accessories or the maintenance of internal components depending on the version of your engine.

€3.66

Rotax

M8 Rotax Cylinder Embase Nut (18)

TheM8 base nut is the attachment element that engages the cylinder at the bottom motor (housing). On an engine Rotax Max, there are four, positioned at the corners of the base. Their role is to maintain a constant pressure on the base gasket to ensure the sealing and absorb explosion and vibration constraints.

Rotax Guillotine seal | Valve-Magickart seal

€3.49

Rotax

Exhaust valve gasket Rotax Max (6) (4)

€16.52

Rotax

(32 max) or (37 dd2) valve Rotax origin

The valve Rotax Origin is an essential component for karting engines Rotax Max Evo, Junior and DD2. Fabricated RotaxThis valve is designed to provide optimal performance and durability. It is crucial to regularly check your valves to ensure proper operation and maintain the performance of your engine. Sold by unit, this valve is an ideal choice for karting drivers seeking to improve the reliability and performance of their engine.

€34.90

Rotax

Rotax air limiter MINI MAX 19mm alumin

€2.20

Rotax

Rotax TORICAL PLACE of guillotine 6X2.5mm...

€10.10

Special Squich Squich Wire Ø2mm

The special Squish wire squeth Ø2mm is essential to set the squish on the 2-stroke engines. This setting optimizes the compression and performance of the engine. A poorly set squish can result in piston holes or loss of performance. The process requires a tin thread, a slide foot, shims, and patience to mount and disassemble the high engine. Follow the jacks, measurement, and squish setting steps for optimal performance.

€34.99

Rotax

ROTAX Micro/Mini exhaust flange MAX Ø 22mm

€595.00 -€45.01 €549.99

copy of CYLINDRE Rotax JUNIOR/MINI/MICRO...

The Engine Cylinder Rotax 125 cm3 is an essential part for karting engines Rotax. Designed to provide optimal performance and increased durability, this cylinder is made of high quality materials to withstand the demanding karting conditions. The bores generally observed according to the letter struck on the cylinder are as follows:

€359.99

Rotax

Cylinder Rotax EVO Plasma (Model 2027) AB

(1) 0.4mm -Magickart cylinder base gasket

€3.99

Rotax

0.4mm cylinder base gasket (1)

€34.90

Rotax

KIT THERMOSTAT COMPLETE ROTAX MAX

The complete thermostat kit Rotax Max is an essential part of the karting engine cooling system Rotax. It allows the temperature of the coolant to be regulated so that the engine quickly reaches its optimal operating temperature and maintains it stable throughout the operating period.

€4.54

Bride de fixation de thermostat

Customers who bought this product also bought:

heath stop for accelerating sheath -Magickart

€0.25

RR

Heath stop for accelerating sheath

connection water-right-Carter engine-Rotax-Max-224094-magickart

€5.10

Rotax

Right Water Fitting Max Motor Cart (25)

The Right water fitting (ref. 224094) is the threaded tip that attaches directly to the motor housing to allow the cooling hose connection. Made of treated steel or brass according to the series, it ensures a passage of constant flow to the water pump. Its "right" design is standard on the majority of montages Rotax To facilitate the path of the hoses along the chassis.

Washer-maintenance-bearing-balance-balancing-Rotax-Max-magickart

€4.10

Rotax

Balanced rolling washer Rotax Max (9)

The Balanced rolling washer (ref. 227280) is a large diameter technical washer designed to secure the axial position of the balancing shaft bearing. Placed between the bearing and the fixing screw in the housing, it prevents any lateral displacement (translation) from the bearing during thrilling acceleration and deceleration phases, thus guaranteeing a perfect alignment of the pendulum sanding.

€0.60

Rotax

Taptite screw M4x8mm Rotax (46)

€6.75

Rotax

Thunder-end needle cage Rotax Max (20)

The Thunder-end needle cage (often referenced under the norm Hk1010, Ref. Rotax 232460) is a small needle bearing housed in the engine housing or launcher support. It receives the end of the electric starter shaft. Its role is crucial: it allows the tree to rotate at very high speed during the start phase with a minimum of friction, while supporting the radial stresses during the haling.

€0.20

Brake/clutch sheath stop

€16.52

Rotax

(32 max) or (37 dd2) valve Rotax origin

€0.99

Rotax

Rotax Wedge 8.5X15X0.50 Carter (21)

The Wedge 8.5x15x0.50 (ref. 227480) is an adjustment technique washer. Mainly used on the axes of internal sanding (such as the water pump shaft or some intermediate axes depending on the versions), it allows the side game moving components. Its calibrated thickness of 0.50 mm Guarantees that the rooms are neither too free (vibration), nor too constrained (heating and friction).

€112.66 -8% €103.65

Iame

Piston x30 Iame

€225.00 -€5.01 €219.99

Set of 4 tires Komet K3W rain (2 AV + 2...

LECONT SET 4 LOH tire for karting, suitable for demanding running conditions

€218.00 -5% €207.10

Lecont

LECONT SET 4 LOH

Set of 4 Kart Komet K3H tires (Cat KA100 & X30 J.) at the best price at Magickart

€205.00 -10% €184.50

Komet

Set of 4 Kart Komet K3H tires (Cat KA100 &...

The Set of 4 Komet K3H tires is the official choice of competitions Iame Series France Since 2024 for categories X30 Junior and KA100. Direct evolution of the famous K2H, the K3H repels the limits of the performance by offering a wider range of use and constant thermal stability even in the longest finals. This complete train (2 front tires + 2 rear tires) is designed for demanding drivers who do not want any compromises between Grip and durability.

Promotion Rotax 11.6mm MAX clutch at Magickart

€144.40 -10% €129.96

Rotax

Rotax clutch 11.6mm MAX (3)

€55.00 -€5.00 €50.00

ngk

PLUG CAP NGK TRS1233

Set of 4 kart tires VEGA SL4 (red) 2024-Magickart

€210.00 -5% €199.50

VEGA

Set of 4 kart tires VEGA SL4 (red)

The Set of 4 Tires Kart VEGA SL4 (Red) 2024 is the latest innovation of VEGA, designed to offer exceptional performance in national categories. Whether you're using a direct drive or a 125-speed transmission engine, these tires are the ultimate reference for balanced and efficient driving.

€54.34 -13% €47.28

OTK

OTK Rear Brake Pad - BS5 - SA2-BS6 ( 2 pads)

The OTK Group'sAR - BS5 - SA2-BS6 Brake Pads are designed to provide optimum braking performance for Tony Kart, Exprit, Kosmic, Redspeed, Carlos Sainz, and EOS karting chassis. Sold in pairs, these pads are made from high-quality materials to ensure maximum durability and efficiency.

max ou (39) dd2 VIS DE LAMELLES M3X6 (34)

Product Details

Specific References

Product Comments

in the same category

Rotax

Rotax exhaust valve stud - 6 x 30.5 x 12 mm Guarantee the fluid movement of your valve with this original stud Rotax. With its precise dimensions of 6x30,5x12 mm, it ensures a perfect guidance of the guillotine, avoiding any blocking and optimizing the performance of your engine to all the regimes.

Rotax

Rotax

spare parts origin

Rotax

Rotax

Rotax

The exhaust valve gasket is an essential part guaranteeing the perfect sealing of the valve system on the rotax motors. It ensures optimal operation of the exhaust valve and preserves motor performance.

Rotax

Rotax

original spare parts s

Rotax

Rotax

Rotax

Rotax

Rotax

Customers who bought this product also bought:

RR

Rotax

Rotax

Rotax

Rotax

Rotax

Rotax

Iame

Lecont

Komet

Rotax

ngk

VEGA

OTK