By buying this product you can collect up to 4 loyalty points. Your cart will total 4 points that can be converted into a voucher of €0.40.
TheClutch extractor for IAME X30 (Model after 2013 and Waterswift) is a essential tool for karting mechanics and pilots, designed for Disassemble and easily reassemble the crown or clutch hub Iame X30, KA100 and Waterswift engines. This tool is specifically adapted for the Dry centrifugal clutches, and allows a Rapid and secure dismantling, without risk of damaging the components.
Made in Thermally treated steelhe offers a upper resistance and an Maximum durabilityeven in intensive use.
Compatible engines :
Diameter : Ø 38 mm (Standard for Iame X30 clutches after 2013 and Waterswift).
Easy dismantling :
Resistance and durability :
Ease of use :
Disassembly of the clutch :
Mounting the clutch :
Maintenance :
TheClutch extractor for IME X30 / Waterswift (Ø 38 mm) is available on MagickartYour online store specializing in high-end tools and spare parts for karting.
Need advice for using or maintaining your extractor? Contact us directly on Magickart!
The Dell'orto FN266 needle strend is a key piece of the engine carburation system Rotax Max. Internal element of the DELL'ORTO VHSB carburettor, it plays a decisive role in the accuracy of the air / gasoline mixture and directly influences the engine response, idling stability, as well as mid-speed performance and at full load.
Designed according to official specifications RotaxThe PUT FN266 guarantees optimal control of the gas flow when the bushel needle moves in its duct. Its machining of very high precision ensures a constant diet, without irregularities, even in the most demanding race conditions: high temperatures, altitude variations, evolution of the gum on the track or rapid changes in turn.
The FN266 is the approved and recommended needle stream for engines Rotax Max senior, Rotax Max Junior, Rotax Max EVO, and some mini / max configurations depending on the factory settings. Its specific design makes it possible to obtain a perfect balance between wealth and responsiveness, promoting clean combustion, a linear torque and a more flexible motor in all acceleration phases.
Durable and reliable, it resists wear caused by flow variations and the friction of the needle, ensuring a constancy of performance over time. It is a key element to maintain optimal motor behavior, avoid acceleration holes and get accurate settings during focus sessions (main spray, needle, diffuser ...).
Speed Racewear ergonomic form control glove.
Optimal adhesion on each steering wheel through a modern silicone coating.
The Scuderia cap Ferrari RP Cap White Leclerc is an official accessory of the Scuderia team Ferrari, specially designed for fans of the Charles Leclerc driver. This white cap proudly features Charles Leclerc's '16' car number embroidered on the visor, as well as the iconic logo Ferrari red. It is part of the PUMA collection for Scuderia Ferrari and is perfect to show your support for the team and Charles Leclerc during the 2025 racing season.
Watch for the health of your engine in real time thanks to Anodized water temperature sensor connection. This high quality aluminum compact adapter is the centerpiece to prolate a clean temperature sensor (standard thread for probes Alfano, MyCHRON, AIM, etc.) directly on the liquid cooling circuit of your box with box (kz) or monovite (Rotax Max, Iame X30).
Accurately machined, this fitting displays an outside diameter of 18.5 mm at its sealing flanges, making it the perfect ally for the Standard water pipes displaying an internal diameter of 16 to 17 mm. Its 14 mm inside diameter guarantees an optimal fluid stream without creating any load loss in the cooling circuit. Thanks to its anodized finish, it resists perfectly with corrosion, anti-tartar additives and high temperatures of the engine fluid. Its total length of 84 mm allows easy integration into the ducts of hoses, all for a featherweight of only 76 grams so as not to weigh up your system.
The Gasoline recovery tank is a crucial passive security element. Its role is to collect fuel surplus escaping overflow culpriture hoses or the main tank. It prevents gasoline from spreading on the track, tires or brakes, limiting the risk of fire and slip.
Regulatory reminder: The use of a recuperator bottle is obligatory in competition and in most leisure sessions.
New Karting gloves Alpinestars Tech 1 K Race V2 Pure are sober and marry all combinations. They have a pre-curved shape that ensures better comfort in the driving position.
Optimize your driver's racing strategy with theStilmotor tower panel, the reference communication tool for competitive karting. Designed to be perfectly legible even at high speed, it instantly announces the number of remaining laps or the position in the race.
The Stop Iame 2021 red button is a motor stop accessory designed specifically for karting engines Iameincluding the series X30 and Ka100. Manufactured according to Iame standards, it provides reliable and immediate power output when necessary, making it an essential security element for any track use.
This button is distinguished by its bright red color allowing a quick identification in case of emergency, a robust construction adapted to the vibrations and the demanding conditions of karting, as well as Simplicity of installation Compatible with standard electrical systems of KARTS X30 and KA100.
It is built with a double zinc-plated steel wire. It works great also with soft and small pipes.
- Size: from 9,8 to 10,4mm
- Net Weight: 0.9gr
The Water pump (ref. 229470) is a small steel precision cylindrical pin. Its role is to ensure rigorous alignment between the motor housing and the water pump cover. A good alignment is crucial for the water pump shaft to be perfectly centered in its spite joints and its bearings, thus avoiding any premature wear or cooling liquid leak.
Marry to lose 15 minutes and rip your hands off to change a water pump belt? TheMK Cobra beltis the innovative solution adopted by KZ and X30 drivers. Thanks to its ingenious locking system, it allows a flash replacement without disassembly of the shaft or pulley.
The game of 0.30 mm fiber valves is the standard for motorizations Iame. Unlike carbon which is more rigid, the fiberglass in 0.30 mm offers excellent reactivity to the opening, which greatly promotes the Couple at low and mid-speed. It is the ideal choice for winding tracks where the turn output revival is crucial, or for pilots seeking a more stable and less sensitive carburation.
• Synthetic leather upper SPRINTSKIN ultralight.
• The light oil and fire resistant rubber sole.
• The anti-abrasion rubber printing areas for increased durability.
• Soft padded Achilles gusset for added comfort.
• Velcro closure strap ankle for a secure and customized fit.
Moyeu embrayage garni Gazelle PMIAA60842 (105) Iame. Elle porte la roue avant et pivote avec la direction.
The Red Bull Racing backpack MV1 is an indispensable accessory for all enthusiasts of the famous stable. Practical, robust and sports design, it is suitable for both school and for daily trips or outdoor activities.
The KG BOOSTER air box is one of the most successful on the market, specially designed to offer a maximum air flow While respecting the FIA standards in force.
Equipped with Internal filter PO37 sprintIt guarantees an extremely low pressure drop, allowing the engine to breathe fully and to express its potential, both on the boxes with box (Kz) and on the mono-speed categories (OK - OKJ - OKNJ).
Thanks to his Innovative internal design, the KG Booster combines performance, noise reduction, particle control, and Optimization of the airflowWhat makes it a reference for competitors looking for the best of Italian technology kg.
Discover this Exclusive Burago Pack including 4 monoplaces of Formula 1 at 1/43 scale, representing some of the most emblematic pilots of the current grid. An ideal set for collectors, F1 enthusiasts or to offer a complete and spectacular gift.
The Special bridle rear bumper Ø30mm aluminum cobra is designed for Hold your bumper firmly during karting races, even in case of violent shocks with your opponents. Made in High strength aluminum, this flange offers a Robust and light solutionideal for Protect your kart Without weighing your chassis.
Take an essential garment and give it a real touch of racing. No clothing will accompany you as far and in as many circumstances as the classic T-shirt, so make sure it reflects your passion while highlighting you. The Scuderia T-Shirt Ferrari RP Team Tee is a must for all Scuderia fans Ferrari.
Take an essential garment and give it a real touch of racing. No clothing will accompany you as far and in as many circumstances as the classic T-shirt, so make sure it reflects your passion while highlighting you. The Scuderia T-Shirt Ferrari RP Team Tee is a must for all Scuderia fans Ferrari.
The rear brake disc OTK Ø180x13mm self-ventilated BWD is a high-end component, specially designed for Group Karts OTK from 2025 (Tony Kart, Kosmic, Redspeed, virtually known, Carlos Sainz, Gillard, etc.). This disc self-ventilated offers a optimal braking powera exceptional durability and an Resistance to thermal and mechanical stresses, essential for competitive performance.
Made in Treated and treated steelthis disc is Optimized for active cooling, thanks to his Integrated ventilation fins, which allow a rapid dissipation of heat. This guarantees a Constant and reliable brakingeven during the most intense sessions.
The OTK 50 mm 180x13 Magnesium - BWD brake disc holder, new 2025, is an essential part for chassis from the OTK group, including Tony Kart, Kosmic, Exprit, Carlos Sainz, EOS, and Red Speed. Here's some more information on this product:
TheClutch extractor for IAME X30 (Model after 2013 and Waterswift) is a essential tool for karting mechanics and pilots, designed for Disassemble and easily reassemble the crown or clutch hub Iame X30, KA100 and Waterswift engines. This tool is specifically adapted for the Dry centrifugal clutches, and allows a Rapid and secure dismantling, without risk of damaging the components.
Made in Thermally treated steelhe offers a upper resistance and an Maximum durabilityeven in intensive use.
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent