Rondelle Plate 6,3 x 12,5 x 1 mm OTK

No reward points for this product.

En cliquant vous allez être redirigé vers le site sécurisé de notre partenaire SOFINCO

Description
Product Details

Flat washer Ø 6.3 x 12.5 x 1 mm OTK

Reference R.P.6X12-+-

Specific References

Product Comments

Comments (0)

Viewed products

€64.80

Tonykart

Wheel Hub AL Ø 30 x 84 mm

in the same category

€269.95

Alpinestars

copy of COMBINAISON KARTING ALPINESTARS...

Exclusive exterior coating material, combined with a soft knit lining for optimal production levels, light weight and comfort.
Technology mesh panels strategically placed for effective control of body temperature.
The arms, legs and torso panels are designed anatomically to provide the optimal position during driving.

€95.00

Alfano

Speed sensor A-246

€214.90

Komet

PNEU KOMET K1W

€57.00

RICCIARDO KART

FRONT BUMPER D 550x320 FL09/14 (2)

headphones-Integral-Zamp-RZ-70F-GREEN-GRAPHIC-HOMOGE-FIA-SNELL -MAGICKART

€699.90

ZAMP

Helmet ZAMP RZ 70F Green

Zamp Racing is proud to announce his graphic helmet Green RZ-70F Revolutionary, a state-of-the-art model designed to provide absolute versatility and maximum level of protection in automotive competition, stamina and karting.

The major innovation of this helmet lies in its unique configuration system: by simply removing a playback plate and three screws, you can easily configure your headset for a wide variety of race configurations. Add a communication kit or a hydration system has never been so simple! In addition, the chin tree incorporates EPS foam channels specially designed to route microphone cables and beverage tubes without any discomfort.

Comfort and thermal side, the RZ-70F is equipped with the system Ddair, Double density air integration technology. Its 360 degree complete air can provide an ultimate flow of air around the skull: fresh air actively in the helmet and hot air is expelled. Its mixed mild aramide composite hull also benefits from Z-design, circulating air through large internal channels. Inside, the Premium Liner of the Color Coordinated 28 series is completely removable, washable and flame retardant. Finally, removable ear pads and protection on the chin strap allow the pilot to mitigate the ambient noise while he hearing precisely what it needs (engine, radio)

€18.90

SODI BUMPER MOUNTING

€4,900.00

CHASSIS DY48502 MOTEUR KA100Q22820

Set 4 jantes 9F MG Oxitech 130/212mm 58mm

€466.80

Set 4 wheels 9f mg oxitech 130 / 212mm 58mm

€222.00

OMP

copy of Combinaison FIA karting OMP KS-3X

bearing-bearing-axle-50-40-st5-Hi-Tech-birelart-freeline-magickart

€129.99

BIREL

Bearing with axle bearing 50/40 ST5 HI...

The HI-TECH TRECH ST5 is a centerpiece of the rear train of chassis Birelart ,Charles Leclerc and Ricciardo Kart. This kit includes high-strength aluminum support (bearing) and precision bearing.

The specificity "St5" Designates a performance-oriented design, providing rigorous retaining from the tree while allowing maximum freedom of rotation. Format 50/40 (80mm outer diameter / 50mm interior) is the standard for 50 mm shafts on gearbox (kz) or high performance frames.

Vortex Mini 60 Fr-Magickart Cylinder Gasket Vortex

€3.35

VORTEX

Vortex mini 60 en cylinder base gasket (9)

The Vortex mini 60 en cylinder base seal is an essential piece of the high engine. Placed between the motor housing and the cylinder, it ensures a Perfect sealing While adjusting the height of the cylinder according to the chosen thickness.

The choice of the thickness of the seal directly influences the Engine diagram, the compression ratio and the behavior of the engine. It is a key element in the precise adjustment of the mini 60 en in competition.

€94.99

RR

FLOW DIVERTER FOR WATER RADIATOR

€41.30

Dunlop

Dunlop Kart Tire Rental KE-1 ARRI...

€1.20

Tonykart

Clips Etrier Avant BS5

Comninaison Speed racing Barcelona RS-1 noir-neon jaune

€137.90

Speed

Comninaison Speed racing Barcelona RS-1...

€144.95

Arai

Display CK6 iridium ARAI silver mirror

Customers who bought this product also bought:

Brake disc ar disk OTK Ø180x13mm auto-ventile bwd OTK-Magickart

€178.50 -11% €158.87

OTK

Brake disc ar disk OTK Ø180x13mm...

The rear brake disc OTK Ø180x13mm self-ventilated BWD is a high-end component, specially designed for Group Karts OTK from 2025 (Tony Kart, Kosmic, Redspeed, virtually known, Carlos Sainz, Gillard, etc.). This disc self-ventilated offers a optimal braking powera exceptional durability and an Resistance to thermal and mechanical stresses, essential for competitive performance.

Made in Treated and treated steelthis disc is Optimized for active cooling, thanks to his Integrated ventilation fins, which allow a rapid dissipation of heat. This guarantees a Constant and reliable brakingeven during the most intense sessions.

OTK 50 mm 180x13 Magnesium Disc Holder - BWD-Magickart

€135.60 -10% €122.04

OTK

OTK 50 mm 180x13 Magnesium Disc Holder - BWD

OTK brake disc holder 50 mm 180x13 Magnesium - BWD, new 2025

The OTK 50 mm 180x13 Magnesium - BWD brake disc holder, new 2025, is an essential part for chassis from the OTK group, including Tony Kart, Kosmic, Exprit, Carlos Sainz, EOS, and Red Speed. Here's some more information on this product:

€6.00

Dasty Classic Degreaser Cleaner

€7.49

RR

SILENCE SAMPLE FAST EXCHANT

€0.20

OTK

Screw Head Cylindrical Five Pans Creux...

€176.40 -10% €158.76

EXPRIT OTK

Rear brake disc180x13mm OTK before 2025

The Rear brake disc 180x13mm OTK is a high-end component Designed for Group Karts OTK (Tony Kart, wished, reddspeed, Carlos Sainz, Kosmic etc.) before 2025. This disc is specially studied To offer a optimal braking powera exceptional durability and an Resistance to mechanical stresses Intense, essential for competitive performance.

Made in Treated and treated steel, this disc guarantees a Wear resistance and deformationeven in the most demanding conditions. His Optimized design ensures Effective cooling, reducing the risks of overheating and now a constant performance Throughout the sessions.

€0.08

OTK

AR BSM brake caliper m5 OTK

€0.22

OTK

copy of Ecrou M5 Calfeutré OTK

€23.90 -€2.10 €21.80

Lexoil

LEXOIL oil 996 evo1 premium

The LEXOIL 996 Evo1 Premium oil is specially developed for 2-stroke engines up to 250cc with gearbox. This kart oil guarantees high burning speed, maximum efficiency and performance. It is designed not to form a calamine deposit, thus avoiding hot spots and loss of performance. Based on the latest lubrication developments, the LEXOIL 996 oil clearly upgrades all current lubricants.

€120.00 -10% €108.00

Rotax

Piston Rotax Origin 53.98 with 2018 segment

The piston with original band Rotax is an essential component for engines Rotaxdesigned to provide optimal performance and exceptional durability. This piston is suitable for multiple engine models Rotax, including the Rotax Micro max, Rotax Mini max, Rotax Junior, and Rotax Max (senior). Fabricated Rotax, a brand recognized for its quality and innovation in the karting world, this piston is ideal for demanding drivers looking for reliable and efficient solutions for their karting engines. In addition, Magickart offers this piston at a more competitive price than that of French and Italian competition, allowing you to benefit from the best quality at the best price.

€125.00 -10% €112.50

Rotax

Rotax 53.99 piston with 2018 segment

chassis-karting-MAF-kt2-OK-v2-30mm-magickart

€2,157.12 -12% €1,898.27

CRG

Frame CRG KT2 30/30 OK 2026

The CRG Kt2 is the versatile chassis par excellence of the Italian manufacturer. Unlike the Rébec Road (more rigid), the KT2 uses a frame compound full of tubes of 30 mm in diameter. This architecture offers controlled flexibility, ideal for freeing the engine in categories without gearbox like the OK, Iame X30 or the Rotax Max.

Its geometry allows fast adaptation to all track conditions (high grip or green track "). Featuring the last components of the range CRG RacingHe combines exceptional motor skills at a surgical front train accuracy.

€2,157.12 -12% €1,898.27

CRG

Frame CRG KT2 30/30 KZ 2026

The CRG KT2 2026 Version Kz redefines the standards of the Queen category. While the Road Rebel (32mm) remains the choice for the tracks with very high grip, the KT2 in 30mm Has become the favorite weapon of Kz pilots looking for more agility and ease in the support changes.

For 2026, CRG Reworked the composition of chrome-molybdenum steel to provide a better response from the front train during degressive braking. This KZ version stands out for its localized structural reinforcements and its integral front / rear braking system, essential to stop the power of 50 horsepower engines

€67.50 -10% €60.75

CRG

Rear hub 30x35 black complete CRG

The hub of 35 mm long is considered a "short hub". In karting, The choice of hub length is a fundamental adjustment tool:

Short hub (35 mm): It offers less contact surface with the axle than models of 75 or 90 mm. This usually allows to have a "freer" behavior of the rear train, Helping the chassis to be free from curve, Ideal on tracks with a lot of grip (adhesion).

hUYEU-BACK-CRG-30X40-Black-Complete-Axle-30mm -Magickart

€67.50 -10% €60.75

CRG

Rear hub 30x40 black complete CRG

The hub of 40 mm long is often considered the "standard" or "versatile" value on adult karts equipped with a 30 mm (x30, axle, Rotax, Kz, ok). Unlike very long (75-90mm) hubs that considerably rigidify the rear, or the very short (35mm) that fully freed the chassis, the 40 mm Offers neutral and healthy behavior, ideal for starting a setting session before refining.

hub-rear-MAF-aluminum-gold-50x85-r2-0-karting-competition-magickart

€132.00 -10% €118.80

CRG

50x85 gold rear hub R2.0 complete gold...

The hub of 85 mm is a "long" adjustment room. In karting, the choice of the hub length is directly related to the leverage exercised on the axle:

Stability and Grip: With 85 mm, you increase the rigidity of the rear train and removing the load outward. This is the ideal tool for more moving output output or to expand your back path without stacking spacers (which weakens the assembly).
R2.0 version: This name indicates an evolution of design at CRG (best machining, optimized weight and anodized finish "Gold" for higher resistance to corrosion).

copy of Rondelle Plate Ø 5 x 11 x 1 mm OTK

Description

Product Details

Specific References

Product Comments

Viewed products

Tonykart

in the same category

Alpinestars

Alfano

Komet

RICCIARDO KART

ZAMP

OMP

BIREL

VORTEX

RR

Dunlop

Tonykart

Speed

Arai

Customers who bought this product also bought:

OTK

OTK

OTK brake disc holder 50 mm 180x13 Magnesium - BWD, new 2025

Ultra-efficient universal degreasing for powerful and fast cleaning

RR

OTK

EXPRIT OTK

OTK

OTK

Lexoil

Rotax

Rotax

CRG

CRG

CRG

CRG

CRG