Aim

Aim Wire + clips sensor engine speed (Tour / mn)

€8.40
  Tax included
Reference: JA1600

This cable is the primary sensor of your on-board computer. It works by magnetic induction : wrapping around the wire bougie, it captures the electric pulse sent by the coil to each spark and translates it into exploitable data (lathes per minute) on your screen.

  • Accurate reading: Allows you to monitor the engine speed in real time to optimize your carburation and transmission reports.

  • Non-invasive installation: No need to cut or strip cables, the signal is captured through the insulation of the wire of bougie.

  • Complete kit: Supplied with maintenance clips to ensure that the wire does not move despite intense vibrations.


 The product is in your cart now
Waiting...
Unable to Add to cart
  In stock

Presentation: the vital link of telemetry

This cable is the primary sensor of your on-board computer. It works by magnetic induction : wrapping around the wire bougie, it captures the electric pulse sent by the coil to each spark and translates it into exploitable data (lathes per minute) on your screen.

  • Accurate reading: Allows you to monitor the engine speed in real time to optimize your carburation and transmission reports.

  • Non-invasive installation: No need to cut or strip cables, the signal is captured through the insulation of the wire of bougie.

  • Complete kit: Supplied with maintenance clips to ensure that the wire does not move despite intense vibrations.


- Technical specifications

Feature Details
Mark AIM (Original Spare Parts)
Compatibility Mychron 4, Mychron 5, Mychron 5s, Mychron 5 2T MyCHRON 6
Signal type Induction (RPM)
Included Sensor wire + plastic fastening clips
Length Standard (adjustable by winding)

- Mounting tuto: for a signal without parasites

  1. Connection: Connect the specific socket at the back of your Mychron (marked port "RPM").

  2. Wire passage: Run the thread along the chassis, ideally following the accelerator cable, avoiding the high heat areas (exhaust pot).

  3. The winding (crucial): Wrap the sensor wire around the wire bougie (between the coil and the antiparasite). Make 4 to 5 tours tight.

  4. FIXING: Lock the winding with the help of clips provided or small Rilsan necklaces. The wire must be integral with the wire bougie without being crushed.


💡 Michel's trick

"If your Mychron displays whimsical values or 'jump' (eg, from 6000 to 18000 turns suddenly), it is often an induction problem. The trick: Do not do too many turns (no more than 5) because it creates parasites. My Pro Council: Keep the RPM wire from other sensor cables (water / exhaust temperature) to prevent electronic interference. A clean signal is the basis for adjusting its engine! "


❓ FAQ SEO (Frequently Asked Questions)

Q: Is it compatible with the engines Rotax, Iame And TM? R: Yes, this induction sensor is universal and works on all karting engines equipped with a thread of bougie classic.

Q: What if the thread is too long? A: Never cut the thread! Wrap the excess properly and secure it away from the ignition coil to avoid captivating parasitic signals.

Q: Are the clips reusable? A: The AIM origin clips are robust, but with the heat of the engine, they can become brittle. It is advisable to check them at each engine revision.

JA1600
1 Item

In the same category

This website uses cookies to ensure you get the best experience on our website.Learn more about cookies

User Area

Guest

Login/Register

Forgot your password?

Languages

Currencies

Languages

Currencies

My Cart

Your Cart is Empty
Cart 

Menu

Search

Our Terms

Terms of Service

In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION

In the following :

The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.

The Buyer designates the Seller's customers, whether they act as a professional or an individual.

 

Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE

These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.

They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").

In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.

Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.

The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.

 
Article 3: SPECIAL CONDITIONS OF SALE

The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.

 
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS

4.1. Product Features

The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.

4.2. Availability

The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.

The Seller reserves the right, at any time, to delete or modify a Product, without notice.

In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.

In the event of total or partial cancellation of the order:

- The order of the Buyer will be validated and his bank account will be debited for the entire order;

- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;

- The Buyer will be delivered Products available;

- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.

In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.

Rule 2

Here is the rule 2 content

Rule 3

Here is the rule 3 content