• -15%

Complete motor housing Rotax max EVO black

€852.00 €724.20
  Tax included
Reference: FR311.009

The Full crankcase Rotax black (ref. 296161) Represents the internal chassis of your engine. Designed for versions Evo and the models produced after 2014, this pair of housings (right side and left side) has a high-strength black surface treatment. They are machined together in the factory to ensure perfect crankshaft alignment and transmission shafts, thus ensuring optimal performance and increased longevity.


 The product is in your cart now
Waiting...
Unable to Add to cart
  No items in stock

Full description: Why choose these housings?

The transition to the black crankcase after 2014 is not just a question of aesthetics:

  1. Superior machining quality: Carters are appared to manufacturing. This means that both halves are machined simultaneously so that the bearings housing is perfectly coaxial.

  2. Thermal dissipation: The specific black coating helps heat dissipation, now a more stable operating temperature for low engine.

  3. Structural reinforcements: Post-2014 versions benefited from competing feedback to strengthen zones of strong constraints, including engine supports and crankshaft bearings.

  4. Perfect sealing: The seal planes are surfaced with micrometric precision, ensuring a constant pre-compression and no leakage of oil or air.


💡 Michel's trick

"Attention guys, change a crankcase, it's the equivalent of an open-heart operation! We never buy one side of Carter: they are sold in pairs because they are machined together. If you mix a left side of a motor and a right side of another, your bearings will force and you will break everything in 10 minutes. My advice: Enjoy it for mounting new 6206 crankshafts and spis joints of high quality. And above all, uses a torque wrench to close the block, otherwise you risk to veiling the plan of seal!"


🎓 Tuto: assembly and recommendations

  1. Preparation: Clean the seal plans perfectly. Use a powerful degreaser to remove any trace of storage oil.

  2. Heating: To insert the bearings without stress, heat the baked housings or with a thermal stiffer (about 80-100 ° C). The bearing must fall into its accommodation without forcing.

  3. Seal: Apply a thin layer of high quality joint dough or use the original paper seal. Be careful not to obstruct the lubrication channels!

  4. Tightening: Tighten cross crankcase screws, in successive stages, to ensure that both halves are perfectly uniform.


✅ Compatibility

  • Rotax 125 Max & Evo (Models after 2014)

  • Rotax Junior, Mini, Micro Max (EVO Versions)

  • Note: Compatible with EVO cylinders and old models (check the studs).

Note Magickart: This kit includes the Two half-cagres (right and left). Part 100% Origin Builder to ensure your technical compliance in competition.r

FR311.009
-2 Item

In the same category

This website uses cookies to ensure you get the best experience on our website.Learn more about cookies

User Area

Guest

Login/Register

Forgot your password?

Languages

Currencies

Languages

Currencies

My Cart

Your Cart is Empty
Cart 

Menu

Search

Our Terms

Terms of Service

In case of return product (unless error on our part)
the transport costs are the responsibility of the customer, the return must be in "colissimo signature" obligatorily
We are not responsible for errors in size, color, model, spare parts. Any change will be done at the expense of the customer.
In case of product replacement of the size, color, model, or other, the customer has 14 days to return the products upon receipt of the order
Article 1: DESIGNATION

In the following :

The Seller designates the company LA CALMETTE KARTING, SARL registered at the RCS of NIMES under the number 495333189, whose registered office is located road Saint Chaptes- 30190 LA CALMETTE - France.

The Buyer designates the Seller's customers, whether they act as a professional or an individual.

 

Article 2: FIELD OF APPLICATION - COMMUNICATION- ACCEPTANCE

These General Conditions of Sale (hereinafter referred to as the "GTC") constitute the sole basis of the commercial negotiation between the Seller and the Buyer.

They are intended to define the conditions in which the Seller provides its Products to the Purchasers and apply, without restriction or reservation, to all sales made by the Seller to Buyers, either directly or through its website online sales www.magickart.eu and www.magickart.fr (hereinafter referred to as the "Site").

In accordance with Article L. 441-6, I paragraph 1 of the French Commercial Code, they are systematically communicated to any Buyer who so requests, to enable him to place an order with the Seller. They are also accessible on the Site.

Any order of Products addressed to the Seller implies, on the part of the Buyer, the unconditional acceptance of these Terms, the acknowledgment of being fully aware of it and the waiver of its possible general conditions of purchase.

The Seller reserves the right to modify its Terms and Conditions at any time. If this is the case, the GCS applicable to the Buyer will be those in force on the date of the order.

 
Article 3: SPECIAL CONDITIONS OF SALE

The special conditions granted to the Buyer are applicable only if they have been the subject of an express, prior and written agreement of the Seller. Only the points explicitly mentioned in this express, prior and written agreement constitute a derogation from the GSC, which, for the rest, apply in full.

 
Article 4: DEFINITION, USE AND AVAILABILITY OF PRODUCTS

4.1. Product Features

The Products offered for sale by the Seller, in its brochures and catalogs as on the Site, are described in the most precise and explicit way possible. The choice and the purchase of a Product under the sole responsibility of the Buyer, it is his responsibility to refer to the product description, brochures, catalogs or the Site, to know the essential characteristics before all orders. It is also the responsibility of the Purchaser to ask for clarification if it deems it necessary to ensure the adequacy of the Product to the needs and use for which it intends the Product. The photos of the Products, whatever their media, are not contractual.

4.2. Availability

The offers of Products presented by the Seller on its brochures and catalogs as on its Site are valid while stocks last.

The Seller reserves the right, at any time, to delete or modify a Product, without notice.

In the event of total or partial unavailability of Products after placing the order, the Buyer will be informed by email as soon as possible of the unavailability of the Product (s) and the total or partial cancellation of his order.

In the event of total or partial cancellation of the order:

- The order of the Buyer will be validated and his bank account will be debited for the entire order;

- The Seller will contact the Buyer to inform him of the cancellation of his order and offer to renew his order, with the exception of the Product not available;

- The Buyer will be delivered Products available;

- The Buyer will be refunded the price of the ordered Product not available as soon as possible and, at the latest, within 30 days of the payment of the sums he has paid.

In accordance with Article L. 121-11 of the Consumer Code, the Seller reserves the right to refuse, for legitimate reason, any order placed by a consumer Buyer that would suggest that he carries out an economic activity in connection with the Products ordered or, more generally, including for a professional Buyer, any abnormal order within the meaning of the relevant case law.

Rule 2

Here is the rule 2 content

Rule 3

Here is the rule 3 content