| Specification |
Technical details |
| Product type |
Cap bougie High voltage ignition antiparasite |
| Mark |
Tm kart (Original TM Racing Genuine Parts) |
| Material |
Rubber / resin Silicone reinforced high insulation |
| Resistance / tightness |
Optimal resistance to vibration, water and high temperatures |
| Motor compatibility |
Range Tm kart : KZ10, KZ10B, KZ10C, KZ-R1, KZ-R2, Kz-r3, Ok, mini 60 ... |
| Fixing |
Screw connection on standard high voltage cable (7 mm coil wire) |
-Complete product of the original TM KART Candle Cap - ignition reliability for KZ, R1, R2, R3 and OK engines
Ensure a perfect electrical transmission between your reel and your bougie thanks to cap bougie original TM Kart. Critical element of the ignition chain of your engine, this official antiparasite is specially designed to withstand extreme thermal and mechanical stresses on the Italian brand competition engines.
Made of high-strength insulating material, this cap protects electrical contact against moisture, fuel projections and ignition micro-cuts. Its internal maintenance system guarantees a firm lock on the olive of the bougie, avoiding any risk of accidental disconnection caused by intense vibrations to more than 15,000 rpm. Whether you're flying in Queen category KZ (KZ10, KZ-R1, KZ-R2, Kz-r3) Or in monolisse, this official TM Kart cap guarantees a lively and constant spark for maximum engine performance.
-The man in Michel (the corner of the expert)
* "Hi the Kings of the Chrono! The cap of bougie, It is typically the small room at a few euros that we forget in its corner until the day the engine begins to have incomprehensible failure to high speed. In karting, with the massive vibrations of the 125cc engines, the internal connection of the cap ends up taking the game or corroding because of the condensation.
My mechanical trick of old stands stands for an irreproachable TM ignition: the frank cable cut and the 'Click' security !
When you replace your cap from bougie (whether on a KZ10 or the latest engine TM R3), do not just unscrew the old and screw the new nine directly on the old spool wire. The copper strand inside the high voltage cable tends to oxidize or fray at the end.
Strikely cut 5 millimeters at the end of your coil cable with a sharp pliers to find copper completely new and shiny. Then screw the threaded tip of your new TM kart cap well to the center of the cable until firm socket.
When to fit the cap on the bougie, you must hear and feel a real 'Click' mechanical well net. If it's too soft, it's because the olive of your bougie or the internal clip of the cap is worn. Perfect ignition is the guarantee to start in a quarter turn and avoid the breaks at full load! "*
- Replacement guide: step by step
1.Demontage of the old cap:2 min.Put the kart on his carriage. Remove the old antiparasite from the bougie. Unscrew the cap of the high voltage cable connected to the ignition coil by turning it counterclockwise.
2.Repharification of the ignition cable:2 min.Follow the trick in Michel: inspect the end of the black cable. Using a cutting forceps, cross about 5 mm cable to highlight the copper strand perfectly clean and unoxidized.
3.Montage new TM Kart Cap:3 min.Present the new cap of bougie original TM Kart. Screw it clockwise on the end of the cable by lightly pressing so that the internal tip penetrates well in the heart of the copper core.
4.Connexion and verification:1 min.Firmly press the cap on the head of your bougie ignition until the net lock ("click") feel. Make sure the rubber protector perfectly surrounds the top pellet to block moisture. You are ready to make the TM roar !
-. FAQ SEO (Frequently Asked Questions)
Q: Does this TM KART cap adapt on NGK (B9EG, B10EG, BR10EG ...) competition candles ?
A: Yes, absolutely. This original TM Kart cap is designed to fit the standards of competition candles used in karting (NGK, DENSO, IW ...). It is compatible with the candle heads equipped with their olive / standard connection tip.
Q: Is this cap usable on all generations of TM Kart engines, including the R3 ?
A: Yes I do. This ignition cap uses the standard screwing diameter for HT cables (7 mm). It settles perfectly on all engines of the brand, old models (K9, K9B, K9C, KZ10) to the last generation blocks like the KZ-R1, KZ-R2, KZ-R3, OK or Mini 60.
Q: How often does it replace its cap from bougie in competition ?
A: Due to continual micro-vibrations and high frequency electrical arcs, it is recommended to prevent the cap from bougie once per season or as soon as you notice a fall in firmness during the cottage on the bougie.