Rear axles for kart | Magickart (2)

TREE

Rear axles : Magickart offers axles, shafts, hubs and bearings for karts, in different stiffnesses and lengths according to your chassis and your track. How to choose well: rear axles Measure the diameter and the length of your axle or hub...

Rear axles: Magickart offers axles, shafts, hubs and bearings for karts, in different stiffnesses and lengths according to your chassis and your track.

How to choose well: rear axles

Measure the diameter and the length of your axle or hub before ordering.
Check the bearings and bearing housings regularly.
Adapt the stiffness of the axle to the type of track and the grip.

Not sure about the choice or compatibility? The Magickart team, karting specialists, will advise you before you buy. Discover also: rear axle assembly, rear hubs, sprocket carriers.

Frequently asked questions

How do I choose the stiffness of a rear axle?
A softer axle gives more grip on a slippery track, a stiffer axle improves response on a grippy track.

How do I know if a bearing is worn?
Play, noise or a tight spot when turning indicate a bearing to replace.

Set entretoises antigliss pour moyeu AR 50mm

€36.00

Antigliss spacer set for AR 50mm hub

50mm aluminium karting anti-slip spacers – Accuracy and stability for rear hub -Magickart

€22.99

RR

Aluminium anti-slip spacer set for AR 50mm...

extractor-axis-karting-50mm-steel-high-resistance tool-paddock-magickart

€34.99

COBRA

50mm Trees Extractor, Stainless Steel

The change of a rear axis of 50mm is a common karting operation to adjust the chassis behavior. However, an axis that has "marked" or which is slightly seized can become a calvary to go out. This dedicated extractor is the essential tool for exerting uniform and controlled pressure. Unlike the "hammer and wooden wedge" technique that may velocate your axis or damage the rolling worn, this tool guarantees clean and secure extraction.

Made of high strength steel, it offers the rigidity needed to extract the most recalcitrant axes without deforming.

€22.00

Reinforcement for L120 D50mm axe

€18.90

Reinforcement for L60mm D50mm axe

ROULEMENT NSK 6210 Ø INTÉRIEURE 50mm EXTéRIEUR 90mm HAUTEUR 20mm

€19.90

NSK 6210 Ø Inner 50mm Outdoor 90mm Height...

€20.30

COBRA

Bearing for rear axle 40 or 50 cobra

Rear axle bearing Ø 40 mm / Ø 50 mm C5 - Karting

The Rear axle bearing C5 is an essential mechanical part to support and allow the fluid rotation of therear axle On a karting chassis (OK, OKJ, KZ, etc.). In Inner diameter 40 mm or 50 mm Depending on the axle used, this bearing is mounted in the bearing support (cassette or carrying carrier) and ensures a smooth and efficient transmission of the movement of the back shaft.