The KG Power Base is the High performance admission muffler expanded by Kg racing To meet the requirements of the High level kartingas well as in categories OK / OKJ that Kz.
Designed as a real technical performance basis, the Power Base KG offers a stable carburationa Immediate motor response and an Optimal reliabilityeven in the most demanding race conditions.
Syn 100 is a high-performance 100% higher oil for 2-stroke-cooled 2--time motors with water or air.Assure an excellent lubrication in the most severe conditions of use in competition and avoids the cutting of the gases by time pluvieux.Rapport mix: according to the manufacturer's recommendations.
Not pre-blend, do not use in oil injection systems.
Do not mix with other lubricants.
FIA-CIK certified
To be installed with 3 holes bearing carrier, wheelbase 91mm
Weight: 399gr
The bougie NGK BR9EG (manufacturer number 3230) is designed for karting engines, including Iame X30 and KA100 models. It offers a key opening of 20.8 mm, an external thread of 14.0 mm, and a thread length of 19.0 mm. It has a SAE connection with screws, from a 1.0 mm ignition position, a central nickel electrode, and a single ground electrode. It is also equipped with an antiparasitting of 5 KOHM and a flat trim seat.
Optimize the behavior and thermal of your kart with the Platinum New-Line inclined. Specifically designed for engines Rotax, Iame and air cooled blocks such as KA100 from IAME, its openwork and inclined design greatly facilitates cooling while adapting perfectly on the chassis OTK.
The Engine Cylinder Rotax 125 cm3 is an essential part for karting engines Rotax. Designed to provide optimal performance and increased durability, this cylinder is made of high quality materials to withstand the demanding karting conditions. The bores generally observed according to the letter struck on the cylinder are as follows:
The Exhaust temperature sensor Alfano Type K (ref. A-2151) is the essential tool for demanding pilots. Unlike standard probes, this "high quality" model is designed to withstand extreme vibrations and gas temperatures exceeding the 800 ° C.. It allows to visualize in real time the temperature of the gases, indicator n ° 1 to refine your wealth and avoid the motor case.
Mug of the Oracle Collection RedBull Racing Ceramic Made Printing Oracle Logo RedBull Racing
Adult coverall made from exclusive outer shell material in black/fluo yellow, combined with a soft tricot lining for optimum levels of production, light weight and comfort.
Strategically placed tech mesh panels for effective body temperature regulation. Arms, legs and torso panels are anatomically designed to provide the optimal position while riding.
Dunlop 6-inch KT14 W14 Racing Tire 11.5 x 7.10-6 Rear Rain
The Birelart CL fixing kit is the reference designed to mount your karting seat in the rules of the art. This kit makes it possible to ensure a rigid attachment while respecting the integrity of the fiberglass of your tub, thus avoiding premature cracks often caused by a direct metal clamping against fiber.
Pair of OTK BSD 2017 rear brake pads for KF and KZ karts. Supplied in sets of 2, at the best price at Magickart.
Brake pump purge cap OTK - Official
Ensure the tightness and proper operation of your braking system with this Original purging cap OTK.
This small room is essential for sealing the purge port of your master cylinder (brake pump) after each purge or replacement operation of the brake fluid. Precisely designed according to the quality standards of the group OTK, It guarantees perfect sealing and resistance to high pressures of the hydraulic circuit.
Secure the mounting of your rear brake pads with this Hold axis Original builder for group karts OTK (Tony Kart, Kosmic, Exprit, Redspeed, etc.).
This axis, also called pin or guide axle, is an essential safety piece. It crosses the body of the stirrup and the pads to keep them perfectly in position, thus ensuring their good sliding during braking and preventing any dangerous lateral movement.
The tree is the spine of your rear train. This original model OTK (Tony Kart, Kosmic, wished) In 50 mm diameter is designed to provide the perfect balance between rigidity and flexibility. Its length of 1000 mm is the standard for categories KF / OK and Rotax, offering maximum versatility on the majority of circuits.
Karting tank OTK 8.5 L 2013 KF is specially designed for group competition karts OTK. This tank is compatible with a wide range of karts, including Tony Kart models, Carlos Sainz, Redspeed, Kosmic, virtually known, and many others. It is intended for the karts OTK Without gearbox, offering a capacity of 8.5 liters for optimal autonomy on the Pist
OTK axle Ø 50 x 1030 mm KZ karting, Karting spare parts, Karting accessories, Karting shaft, Karting performance, Karting reliability, Karting maintenance, Magickart.eu, Karting axle choice, Karting weather, Karting grip
The OTK MXC 130 mm magnesium rim , sold individually, is ideal for karting competition. Ultra-light and designed to dissipate heat, it improves grip and tire durability. Compatible with Tony Kart, Exprit, Red Speed, Kosmic and Carlos Sainz chassis.
The RIM OTK MXC 210 mm in magnesium is specially designed for karting drivers looking for optimal performance. Used in competition by the biggest teams, this rim offers excellent thermal dissipation, thus reducing the overheating of the tires and optimizing their life.
Pack of 6 Motul GP 2T cans for 2-stroke kart engines. High-performance synthetic oil, superior lubrication, clean combustion, improved performance. FIA-CIK approved. Magickart: competitive prices, serious customer service.
The IAME electric starter is an indispensable component for karting drivers equipped with Iame engines. Designed to ensure reliable and fast starts, this electric starter is made with robust materials for a long service life.
BSM wafer axis spring
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent