€1.56

Tm racing

External joint cylinder head TM R2- R1-KZ10C

The external cylinder head seal is a high diameter o-ring that ensures the peripheral sealing between the cylinder and cylinder head cover on the latest generation TM Racing motors (KZ10C, R1, R2). Unlike the internal seal (which seals the combustion chamber), the mission is to contain the coolant and to avoid any leakage to the outside of the engine.

Cylinder head gasket O-Ring Small Ø - 62x1.80 TM Kart -Magickart

€1.20

Tm racing

Internal seal cylinder head TM KZ 8 // 10...

The internal cylinder head is the most demanded element of your high engine. Located at the point of contact between the cylinder head dome (insert) and the cylinder, it has the critical role of sealing the combustion chamber.

This seal in Viton High Performance is the standard for the entire line of TM Racing competition engines, including the last born: the TM R3. It must withstand colossal pressures and extreme burned gas temperatures. A seal in perfect condition is the only guarantee of constant motor power and protection against coolant intrusion into the cylinder.

€7.28

Tm racing

TM spark plug cap (1)

Chambre Combustion Culasse TM KZ10C - KZ R1

€122.28

Tm racing

Cylinder Head Combustion Chamber TM KZ10C...

€119.99

Dome TM KZ10-C/R1 FLAT HEAD PISTON

Combustion chamber TMKART KZ10-C/KZ-R1 A-3.3 -Magickart

€159.90

Tm racing

Combustion chamber TMKART KZ10-C/KZ-R1 A-3.3

€159.90

Tm racing

Combustion chamber TMKART KZ10-C/KZ-R1 A-3.4

€159.90

Tm racing

Combustion chamber TMKART KZ10-C/KZ-R1 A-3.5

€169.90

Tm racing

Combustion chamber TMKART KZ10-C/KZ-R1 A-3.6

€1.20

Tm racing

TM Serflex clamp 18/28 (11)

€0.50

BTR 6x35mm TM CYLINDER HEAD (3)

€99.54

Tm racing

TM Cylinder head cover KZ10-C/KZ-R1

(4) TM Complete cylinder head KZ10-C/KZ-R1

€207.00

TM Complete cylinder head KZ10-C/KZ-R1 (4)

€267.00

Tm racing

COMPLETE CYLINDER HEAD TM R1 TITAN

€899.00 -20% €719.20

Tm racing

TM Cylinder KZ-R1 Standard

€6.01

Tm racing

Tm hose water

(14) TM Entretoise de pipe d'échappement 3mm

€10.36

Tm racing

(14) TM Exhaust 3mm exhaust spacer

Pochette joints complète TM R1 (sauf spi)

€29.11

Tm racing

Complete joint pouch TM R1 (except SPI)

Copper cylinder head joint TM KZ10C KZ R1 -Magickart

€2.39

Tm racing

Copper cylinder head joint TM KZ10C KZ R1

This perforated copper washer is a critical piece between the cylinder head dome and the cylinder. It fills two essential functions: ensure a perfect thermal seal under high pressure and allow the preparer to adjust the squish (Piston distance / cylinder head).

Copper material: Copper is used for its ability to deform slightly during tightening, ensuring total sealing, as well as for its optimal thermal conductivity.
Perforated design: The perforation (detail 6 of the exploded view) allows the passage of the coolant for efficient thermal regulation of the combustion head.
Multi-thickness: Available in a wide range of thicknesses to accurately adjust the room volume and compression ratio.

€135.00 -12% €118.80

Tm racing

Exhaust manifold TM KZ10 / R1 / R2 / R3 Ø28

Optimize the gase sweep and refine the chord of your exhaust gap thanks to the Official exhaust pipe TM Kart model special D2 - 28mm. Strategic part at the outlet of the cylinder, this machined steel collector determines the fluid dynamics and the behavior of your 6-speed 125cc engine.

Developed by the Italian Factory Race Service TM Kart, the Declination Special D2 in 28 mm Offers a perfectly adjusted flange geometry to release the gas vein at high speed while preserving the low and mid-diet torque. Specifically designed for generations KZ10C, KZ-R1, KZ-R2 and the latest KZ-R3, she is also perfectly adaptable on previous blocks KZ10 and KZ10B. Its high precision manufacture guarantees an ideal alignment with the exhaust light of the cylinder and an exceptional resistance to repeated thermal shocks.

collector-exhaust-pipe-tm-special-d2-29mm-kz10b-r1, r2, r3-magickart

€135.00 -12% €118.80

Tm racing

TMKART Exhaust Manifold KZ10B-R1-R2-R3 D2 29

TM exhaust manifold available at MagickArt

€135.00 -12% €118.80

Tm racing

TM SPECIAL EXHAUST PIPE Ø30.5

Optimize the bottom-up filling and maximize the stimulus of your kart thanks to the Official Exhaust Pipe TM Kart Model Special 30.5 mm. Hinge element located at the outlet of the cylinder, this machined steel collector determines the chord of the acoustic waves and the gas evacuation dynamics of your 6-speed block 125cc.

Developed by the Italian Manufacture Race TM Kart, the declination Special of 30.5 mm is characterized by a specific dimension that allows to extend and expand the first exhaust cone. This profile is ideal for strengthening the engine response when re-offecers in slow turns and offering maximum pins. Specifically designed for generations KZ10C, KZ-R1, KZ-R2 and the latest KZ-R3, she is also perfectly adaptable on previous KZ10 and KZ10B engines. Its original manufacture guarantees surgical alignment with the exhaust light of the cylinder and absolute resistance to the strong thermal stresses.

Full engine pouch TM KZ-R1 origin -Magickart

€29.11

Tm racing

Complete joint pouch TM R1 (except spi)

This pouch gathers all the seals necessary for the complete winding of the motorTM R1(Standard, Redline or Titan version). Made according to the quality standards of the TM Racing factory in Pesaro, these seals guarantee perfect sealing and optimal resistance to low-engine pressures and high high-engine temperatures.

€29.99

Tm racing

Kit Seal Spy Engine KZ10 / KZ-R1

The Complete SPI joint kit for TM Racing KZ engines is an indispensable spare assembly of origin manufacturer (Ricambi Originali TM Racing). As illustrated in the reference picture 8722.jpgThis plant sealed bag gathers the entire lip joints needed to ensure absolute tightness of your bottom-motor during a full revision.

On a 2-time high efficiency competition engine as the TM Racing blocks, the slightest air intake or internal leakage can be catastrophic. The crankshaft spi joints retain pre-compression in the pump housing, while the other SPI seals preserve the gearbox oil circuit and the selector axle. Designed in fluorocarbon elastomer type Viton or high specification polymersThese factory joints tolerate crazy linear rotation speeds (up to 16,000 rpm) and total thermal and chemical resistance to fuel fuels or not and competitive oils

€1.49

Tm racing

Cylinder base joint for TM Kart R1-R2

General description

The Cylinder base joint for TM Kart R1-R2 is one Essential sealing room, designed to ensure a Perfect sealing Between the cylinder and the base on the engines TM KZ10B, KZ10C, KZ R1 and KZ R2. This seal is indispensable To avoid Cooling or compression fluid leaks, guaranteeing a optimal functioning engine and a Increased longevity internal components.

Made in Heat resistant materials and pressure, this seal is available in different thicknesses (0.05 mm or 0.50 mm), allowing to adjust the cylinder height and optimize the Engine performance according to the desired settings.

CAPOT CYLINDRE EN PLASTIQUE POUR TM NEW-LINE

€29.90

Plastic cylinder cover for TM NEW-LINE

€42.00

KZ cylinder cover kevlar protection

€69.50

KZ cylinder cover carbon protection

€19.59

EM-Technology cylinder protection

clamp-Tightening-Steel-Water-Water-16-27MM-DIN-3017-TM-Rotax-Iame -Magickart

€0.95

RR

Necklace Tightening Hose Water Radiator

Guarantee a perfectly hermetic and secure connection of your cooling circuit thanks to the Steel clamping collar 16-27 mm. Designed according to the rigorous standard DIN 3017This necklace offers a high and regular tightening torque, ideal for meeting the highest-performance competition engine requirements.

Thanks to its diameter adjustable from 16 to 27 mm, this necklace is universal and adapts perfectly on the water hoses of all the large market karting engines: Tm kart (KZ10, R1, R2, R3 ...), Rotax (Rotax Max, Junior, DD2) or Iame (X30, waterswift, super x30).

Thanks to the reworked form of its screw / drawer system, it guarantees a strong coupling which does not loosen under the effect of repeated vibrations of the engine or pressure variations of the coolant. Concerned about the preservation of your equipment, this model integrates Specially rounded band edges In order not to split, shearing or damaging the rubber or the silicone of your hoses during a tightening. With its 9 mm wide band for 0.7 mm thick and a feather weight of 15 grams, it is the essential accessory for your workshop

hose water-EPDM-type-tm-21025-black-karting-16x25-magickart

€7.00

RR

Hose in EPDM Type "TM 21025" - Black Color

Secure the circulation of the coolant of your competition engine thanks to this High quality EPDM rubber radiator hose type "TM 21025". Specially designed to connect the cylinder outlet to the main cooling circuit, it guarantees total reliability even during the most intense rolling sessions.

Made from selected EPDM rubber and reinforced with an internal high tenacity textile frame, this hose displays optimal dimensions of Ø 16 mm interior for Ø 25 mm outside. Its structure allows it to cash pressure variations, repeated thermal shocks as well as the high temperatures of the liquid without deforming or soften. Its black outdoor finish at the superb canvas Offers excellent abrasion resistance, friction against the tub or chassis, as well as to the projections of gasoline and UV rays.

Joint exhaust-4-hole-tm-racing-tmkart-kz10-r1, r2, r3-magickart

€3.99

Tm racing

Four Hole TM KZ10 - KZ10B - KZ10C - KZ R1-...

The Four-hole exhaust seal Provides the critical link between the cylinder exhaust light and the flange (or the collector). On a 2-time competition engine like the Tmkart, the slightest leak at this level disrupts the return wave of the exhaust jar, resulting in an immediate loss of torque and the callamine projections on the bottom of the motor.

Cylinders TM KZ10/R1

Avant de changer votre cylindre

Questions fréquentes

Purchase a gift voucher

Categories

Cylinders TM KZ10/R1

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

Tm racing

General description

RR

RR

Tm racing