€1.20

Steel m8 steel ball nut

364 Thread with X30 clutch after 2013-Magickart

€161.00 -10% €144.90

Iame

(364) Iame Thread filled with X30 clutch...

e hub with IAME X30 clutch after 2013 is an essential part of the clutch system. It allows progressive and efficient transmission of engine power to the chain, ensuring efficient start and excellent motor skills.

Designed according to the manufacturer standards, it ensures reliability, consistency and longevity in competition use.

€5.89

Rotax

(3) Max Air Box Filter Grid

The Air box filter grid Rotax Max is an essential part of the engine intake system Rotax Max and Rotax Max EVO. It is designed to keep the filter in place inside the air box while ensuring a Regular and secure air passage to the carburettor.

This grid protects the filter against deformations due to vibrations and guarantees a stable aspiration, essential for constant carburation and optimal engine performance. It also helps prevent foreign body entry that can damage the engine.

Used in Junior and senior categories, the filter grid complies with the original configurations Rotax And fits perfectly into the maximum air box without modification.

€21.74

dellorto

NEALE 10375 DELL'ORTO (8) VHSH VHSB

The complete CPL needle for Carburetor Dellorto PhbH-phbl-VHBT-VHBZ is an essential component for any performance and reliability-conscious karting driver. Available in several sizes and easy to install, this needle allows a precise adjustment of the fuel flow, thus ensuring optimum performance on the track. Compatible with a wide range of Dellorto carburetors, it is a wise investment for any serious pilot.

€1.00

608RS Bearing 8mm inner, 22mm outer

€69.90

Cat Laser 219 Crown / Chain Alignment

CAT Laser 219 is a specially designed laser tool to ensure accurate alignment between the crown and the kart chain. Made by Cat, this tool is ideal for type 219 channels and is compatible with the karts Rotax, X30 and 100 cc. It is easy to use and allows perfect alignment by projecting a laser point to the pinion, thus facilitating the setting and maintenance of your kart.

hood-speed-karting-cotton-black-protection-helmet-hygiene-magickart

€3.00

Speed

cad

€9.50

SILICONE HOSE TYPE "TM 21025" KP903

BIDON CARBURANT IN METAL 25 LT at the best prices at Magickart

€33.36

RR

CARBURANT BIDON IN METAL 30 LT

€1.47

Iame

Copper cylinder joint KA100 Iame

The Copper cylinder head gasket for the engine Iame KA100 is designed to ensure a perfect seal between cylinder and cylinder head. Unlike other engines, the KA100 uses copper for its ability to withstand the high thermal stresses while allowing a fine carburation adjustment through the compression ratio.

€120.00 -10% €108.00

Rotax

Piston Rotax Origin 53.93 with 2018 segment

Piston with original band Rotaxpiston Rotax, Karting performance, durability, Rotax, Magickart, Karting, Karting Accessories, Karting Competition, Engines Rotax Micro max, engines Rotax Mini Max, Engines Rotax Junior engines Rotax Max, competitive price, French competition, Italian competition.

€19.99

Iame

Push button black starter Iame x30 ap.2016

The black push button starter iame is an essential component for engines electric start systems IME X30 and Iame KA100. Designed for models from 2016, it allows the starter to operate in a simple, fast and reliable way.

Robust and suitable for karting constraints (vibrations, heat, projections), this button ensures a precise startup with each solicitation. Its black black design integrates perfectly with the dashboard or the steering column.

€0.96

BIREL

CIRCLIP DIN 472 BirelArt

Description:

Ensure optimal security with the DIN472 BirelArt Clips. These essential parts are designed to provide outstanding performance and increased durability, ensuring accurate and consistent braking response. Made with high quality materials, these clips are ideal for those passionate about karting demanding in terms of performance and safety. They are mounted on the BirelArt brake caliper, specifically on the burst of the caliper (part number 8), ensuring easy installation and perfect compatibility. Magickart is the official distributor of Charles Leclerc's karting parts, manufactured by BirelArt, thus guaranteeing the highest quality products.

DIN 472 RETENTION RING (UNI 7437) BIRELART -MAGICKART

€0.79

Charles Leclers

(12) DIN 472 RETENTION RING (UNI 7437)...

€54.79

CRG AV V05/V09/V11 BLACK BRAKE PADS SET

Copper cylinder head 72,3x67.8 sp 0.05mm Vortex mini 60 fr-magickart

€2.40

VORTEX

(5) Copper cylinder head 42,3x67.8 sp...

The Copper cylinder head gasket 42.3 x 67.8 mm for Vortex mini 60 en is an essential element of the high engine. It ensures the perfect seal between the cylinder head and the cylinder while allowing the compression ratio thanks to the different thicknesses available precisely.

Made in High quality copper, this seal withstands high temperatures and high pressures generated by the mini engine 60 in use competition.

€72.89

NEW-LINE

X30 -S125 Radiator Support Adjustable New...

Helmet ZAMP RZ-42Y Graphic White / Blue for Young Drivers-Magickart

€319.99

ZAMP

Helmet ZAMP RZ-42Y Graphic White / Blue

KARTING KARTING KMX9 V2 GRAPH 5 NAVY -Magickart

€269.95

Alpinestars

KARTING KARTING KMX9 V3 GRAPH 5 Navy

The combination Alpinestars KMX-9 V3 GRAPH 5 NAVY represents the ultimate evolution in High-end karting combinations. Combing Modern camouflage designa Lightweight and resistant construction, and Ergonomic advanced featuresThis combination is designed to meet the needs of the most demanding pilots. FIA Level 2 approved, it guarantees a maximum protection while offering a OPTIMAL COMFORT and an freedom of movement unmatched.

€13.99

Iame

PISTON CAGE INA ø14/18/17mm

€1.20

Iame

PISTON PIN CIRCLIP 14X1.0

€135.99

Rotax

Rotax DD2 Full Clutch Flange Kit

The Complete original clutch flash kit Rotax is the essential alternate set to revise and maintain the direct transmission system of your engine Rotax Dd2 (versions produced from 2011 until today).

As a part of the manufacturer origin (Original Rotax Racing), this complete kit guarantees micrometric alignment and perfect tolerances with the motor gear and gear gearges. Subject to high thermal stresses and significant torque transfers during reports (1st / 2nd), a clutch flange in perfect condition is the guarantor of a optimal ground connection, without skating or loss of power. Its reinforced alloy design ensures excellent mechanical longevity in competition.

K8, K9, K9B, K9C (except SPI) joint pouch --Magickart

€20.99

Tm racing

TM Kart Kart K4, K9, K9B, K9C (except SPI)

€3.90

OTK

OTK Spacer Blue Feet 10 mm

€6.90

RR

Lever Tire Valve

€32.99

Jeu plaquettes SINTER Parolin

€22.66

Rotax

Rotax Hose of water 18/650mm

€24.95

Rotax

DD2 2015 Air Box Foam Filter

Full engine pouch TM KZ-R1 origin -Magickart

€29.11

Tm racing

Complete joint pouch TM R1 (except spi)

This pouch gathers all the seals necessary for the complete winding of the motorTM R1(Standard, Redline or Titan version). Made according to the quality standards of the TM Racing factory in Pesaro, these seals guarantee perfect sealing and optimal resistance to low-engine pressures and high high-engine temperatures.

caliper brake-mechanical-cable-karting-Universal-magickart

€77.90

Speed

Cable cable cable

TheCable brake caliper (or mechanical brake) is the ideal solution for those looking for a reliable braking system without the complexity of the hydraulics. Actuated directly by a cable connected to the brake pedal, this caliper offers progressive and powerful braking. This is the standard equipment for leisure karts, rental karts and many "historical" or craft karts.

bushel protection for carburettor rotax 34mm - Magickart

€18.99

RR

bushel protection for carburettor rotax 34mm

This rigid protection is the ideal accessory for all driversRotax Maxusing the carburetorDell'Orto VHSB 34mm. It protects the bushel, needle and spring assembly when the carburettor is removed from the engine. No more twisted needles in the toolbox or dust that infiltrates the mechanism!

axis-pump-a-water-turbine-Rotax-Max-origin-magickart

€23.99

Rotax

water pump axle and turbine without seal...

TheWater pump axis with turbine (ref. 226226) is the heart of the cooling system. Driven by internal sanding, this axis rotates the turbine (propeller) which propels the coolant through the cylinder and the radiator. Manufactured according to the strict tolerances of the BRP-RotaxThis set guarantees a constant, essential flow rate to maintain the temperature of your engine in its ideal performance range.

€3.00

Tonykart

BSS Train Brack 10 mm in 25mm OTK

The BSS front train holds are essential adjustment components for group chassis OTK (Tony Kart, Kosmic, virtually known ...). This model of 10 mm is designed specifically for rockets 25 mm in diameter. They allow to change the width of the front with absolute accuracy, directly influencing the reactivity and grip of your kart into a turn input.

Manufactured according to quality standards OTK, these holds offer perfect flatness to avoid any constraint on your hub bearings

Rubber brake pump protection CRG - ref 0836 at Magickart

€10.40

CRG

Rubber brake pump protection CRG (1)

€63.58

CRG

Brake Pads CRG AR V05/V09/V10/V11 black

€19.90

Iame

(81) 20x48.8 mm x30 connecting crankcase Iame

Iame X30 Connection Clearing - 20 x 48.8 mm

The Iame X30 - 20 x 48.8 mm connecting crankpiece is an essential crankshaft motor part, connecting between the rod and the crankshaft of the X30 engine.

Designed according to the IAME manufacturer specifications, this curse guarantees precise alignment, a high resistance to mechanical stresses and optimal reliability in competition as leisure.

€2.80

Tm racing

(34) TM Clutch Cover Gasket

€28.49

CRG

Hexagonal direction rod CRG

Central element of the geometry of your chassis, thesteering rod CRGallows to adjust your parallelism (opening or pinching) with millimetre precision. Its shapehexagonalis not only aesthetic: it allows a firm grip with a flat key for quick and precise adjustment, even when the rod is mounted on the kart.

Made of high strength aluminium alloy, it offers the perfect compromise between mechanical stiffness and lightness.