By buying this product you can collect up to 10 loyalty points. Your cart will total 10 points that can be converted into a voucher of €1.00.
Why choose only the original part Rotax ?
High resistance materials: The teeth of the pinion are processed thermally to withstand repeated impacts against the start-wreath without sinning.
Calibrated reminder spring: The internal spring has a precise voltage to ensure instant retraction as soon as the engine starts, thus protecting the mechanism and the electric motor.
Treatment of the axis: The helical axis is polished to allow ultra-fast translation of the pinion, even after many hours of use.
Silence and precision: Unlike adaptable, the original return fits perfectly in the Needle cage (HK1010), limiting scrap drums and vibrations.
"The launcher is the great sensitive engine! If you hear a 'clac-clac' but that the engine does not turn, or if the starter whistles in the void is that your return is either sewered or his teeth are puffed. My advice: Never grease the outside of the pinion! The grease attracts the dust of gum and the filings, which ends up blocking the mechanism. A little dry lubricant spray to Teflon on the helical axis from time to time, and that's all. And if your teeth are marked, change it quickly before he does not massage your wreath, because there, the ticket is no longer the same! "
Disassembly: Remove the starter cover. The return usually comes from it alone with its axis.
Cleaning: Regularly clean the return housing in the housing to evacuate dust.
Checking the cage: Enjoy it to check the needle cage At the bottom of the housing. If it is dry or marked, replace it.
Test: Check that the sprocket flows freely on its helical axis and it comes back in place thanks to the spring.
Reference Rotax : 251552
Type: Full launch mechanism (Bendix)
Compatibility: Rotax 125 Max, Junior, Senior, Master, Evo.
Origin: Certified Brp-Rotax
Note Magickart: Room sold individually. For a perfect starting system, also check the status of your Starter wreath (70 teeth) and your drums.
piston TM Racing 10085 Represents the elite of engine technology for KZ categories. Designed specifically for the last generations of engines (KZ10C until R2), this model to Flat sky (zero degrees) is the absolute weapon to optimize combustion. Equipped with a Eightened segment of 0.8 mmIt drastically reduces internal friction, releasing more power at high speed.
The Valve box cover (or intake conveyor) of 29 mm is the major technical evolution of the X30 engines since 2018. Located between the carburetor and the pyramid of valves, its role is to "guide" the vein gas aerodynamically. Its 29 mm inner conduit is perfectly aligned with the new carburetors, eliminating turbulence for more frank acceleration and maximum engine fill.
The game of 0.30 mm fiber valves is the standard for motorizations Iame. Unlike carbon which is more rigid, the fiberglass in 0.30 mm offers excellent reactivity to the opening, which greatly promotes the Couple at low and mid-speed. It is the ideal choice for winding tracks where the turn output revival is crucial, or for pilots seeking a more stable and less sensitive carburation.
The Complete flap box with carbon flaps is designed for karting engines IME X30 and Ka100. Key element of the intake system, it allows to regulate the air-fuel flow entering the engine to optimize the response to acceleration and overall performance.
Lid valve box (conveyor 27 mm) x30 av.2017
The Full flavor box iame is the organ that regulates the entrance to the air-petrol mixture in the low engine. This set includes the box holder (pyramid), high quality fiberglass flaps, stops and fixing hardware. Designed specifically for IAME engines, it ensures total sealing in compression phase and maximum opening when admitting for optimal cylinder filling.
The Full crankcase Rotax black (ref. 296161) Represents the internal chassis of your engine. Designed for versions Evo and the models produced after 2014, this pair of housings (right side and left side) has a high-strength black surface treatment. They are machined together in the factory to ensure perfect crankshaft alignment and transmission shafts, thus ensuring optimal performance and increased longevity.
The Starter return (ref. 251552), often called "Bendix", is a complex mechanical assembly consisting of a mobile pinion on a helical axis. Its role is to project forward under the effect of centrifugal force to cross the start-wreath. Once the engine is launched, the return spring the retracts the retracts to prevent contact with the motor. It is a high precision piece that undergoes important shocks at each start-up.