By buying this product you can collect up to 1 loyalty point. Your cart will total 1 point that can be converted into a voucher of €0.10.
The BirelART FreeLine aluminum tie rod is an essential part of your kart's steering system . Designed to provide optimal responsiveness and increased robustness , it ensures precise and smooth control in all racing conditions. Available in several sizes ( 215 / 225 / 245 / 255 / 265 mm ), it allows you to adapt the geometry of your steering according to your needs and driving preferences.
The steering rods are part of the steering system and require careful installation . Improper fastening can compromise the stability of the kart and present a danger on the track . It is imperative to tighten each fastener properly and check the alignment before each use .
Magickart is the official distributor of the Charles Leclerc chassis for France . This chassis, manufactured by BirelART , is designed to offer the best performance in competition . Trust Magickart to provide you with the best parts and equipment for your karting.
The ALU BirelART FreeLine link rod is designed to improve the precision of your steering while ensuring foolproof robustness . Whether you are an amateur or professional driver, this part allows you to optimize the responsiveness and stability of your kart .
The JENA 2.0 black protection vest is here ideal solution for karting drivers who are looking for a optimal protection unhooked Comfort and freedom of movement. Designed with Robust and resistant materials, this vest offers a Effective protection against shock while guaranteeing a ergonomic cut and one safe fit, even during the most intense conduct sessions.
With its Adjustable straps and its light design, the Jena 2.0 vest is Perfect for pilots of all levels, leisure at the competition, and allows Fully focus on track performance.
TheKMX-9 V3is the latest evolution of the most popular karting combination ofAlpinestars. Designed to offer a perfect balance between comfort, durability and safety, it benefits from advanced two-layer technical construction that meets the highest protection standards.
Used for: Cylinder head temperature measurement
Sensor Type: PT1000
Measuring range: 10-200°C
Precision: Less than 1°C
Entrance: Temp 1 or 2 Temp
Assembly: Between the cylinder head and the spark plug
Waterproof: Yes
Dustproof: Yes
Shock resistant: Yes
Low profile temperature sensor for the cylinder head. 2 mm high.
The brand new combination Alpinestars KMX9 2019 is built in double light and abrasion-resistant double thick fabric while allowing good ventilation.
Preparation carburateur pour KZ r2. Pièce du système d'admission et d'alimentation du moteur.
Front bumper long length for spoiler OTK M11
The seat stiffener for karting is an essential accessory designed to improve the safety, comfort and performance of pilots. It is compatible with all Karting chassis marks and is designed to keep the seat in a secure way. In the event of an accident, the seat stiffener helps to avoid injury by keeping the seat firmly in place, thanks to a suitable bolting. In addition, it allows to add or remove the grip, thus influencing the flexibility of the chassis. Often, it is recommended to put 1 or 2 on each side of the seat to optimize performance. It is an essential element for the proper operation of the chassis, modifying its behavior according to the addition or the removal of stiffeners. The seat stiffener allows you to stiffen your frame and thus create a connection between the tub and your back shaft. Several lengths are available depending on the position of your seat. Several sizes are available because each chassis and seat size are different. CAUTION: The measured length is the center distance of the 2 holes.
That's an excellent precision. For the client, it is crucial to understand that Pressiometeris the measuring tool, but that is thecombination of spring and leverwhich physically creates the trigger.
Here is the update of the sheet with this indispensable technical explanation.
The FREELINE BRAKE CLAIR PISTON (dimensions 32 x 24.5 mm) is a high precision spare parts of origin of original manufacturer (Original Freeline / Birel Art). It is designed to equip the rear brake calipers from the group's adult competition chassis Birel Art (notably the series of stirrups equipping the categories Rotax, X30, ok and kz).
Machined according to strict micrometric tolerances, this piston of 32 mm in diameter for a height of 24.5 mm enjoys a leading thermal and anti-friction surface treatment. In karting, the rear braking system undergoes violent temperature mounted (sometimes more 400 ° C. on the disk). This factory piston is specially treated to withstand the thermal deformation, ensure a perfect linear guidance in the bracket of the stirrup and guarantee an instantaneous pedal return without blocking.
The BTR M6x25mm screw (or chc - hollow hex cylindrical screw) is one of the most used hardware on the engines Rotax. Its length of 25 mm and its thread M6 Make it a versatile screw, mainly used for the assembly of the housings, to the attachment of certain periphery accessories or the maintenance of internal components depending on the version of your engine.
Demi étrier de frein V05 noir gauche CRG. Il presse les plaquettes sur le disque pour ralentir le kart.
The front brake disc fix 80x150x12g KZ Birelart is an essential spare part for competition karts. Designed to provide optimal braking performance, this disc is compatible with a wide range of chassis, including Birelart, Charles Leclerc, Ricciardo, and Kubica.
New Line mixing hose is made with a material that avoids bottlenecks and allows a perfect flow of gasoline.
Sold at meter
Guarantee optimal torque transfer without skating and keep a perfect control flexibility thanks to the Original clutch spring TM KART. The key element of the transmission mechanism of your 125cc gear motor, this spring ensures the constant axial pressure required to tackle the pressure tray against the stack of clutch discs.
On the Official Exploded View (Tavola 6 - Motor Clutch KZ-R3 Total Black), this spring bears the Landmark n ° 4. Manufactured according to the strict specifications of the Italian manufacture, its special steel resists perfectly with the intense heating of the bottom-engine and retains its original stiffness even after hundreds of lap-offs. It offers the ideal compromise between a frank biting during the lever and a progressive progressivity to avoid any untimely skating on the blocks TM KZ-R1, KZ-R2 and KZ-R3.
The birelArt special fuse lock key Ø36 is a tool indispensable for any mechanic, driver or kart preparer working on BirelArt chassis. Especially designed for wheel rockets with diameter Ø36 mm, this key allows block the rocket nut during tightening or loosening, thus avoiding any risk of inadvertent rotation and ensuring accurate and secure work.
Main features:
The Steering Flight 320 Charles Leclerc 2020 BirelART HQ is an essential accessory for demanding karting drivers. Designed to offer optimal performance and exceptional durability, this steering wheel combines elegant design and optimal performance. Inspired by Formula 1 champion Charles Leclerc, this steering wheel is made of high quality materials, guaranteeing a long life even in the most demanding racing conditions.
Double reinforcement karting tire dismount is an indispensable tool for all karting enthusiasts. Very convenient and space-saving thanks to its foldable design, this tire dismount is also very effective for disassembling and assembling karting tires. Its double reinforcement ensures increased robustness and durability, even when using intensive use.
The Brake Pads 2023 Front BirelArt 50x8 KZ EVO- Magickart For good braking use the brake pads BirelART
The piston with original band Rotax is an essential component for engines Rotaxdesigned to provide optimal performance and exceptional durability. This piston is suitable for multiple engine models Rotax, including the Rotax Micro max, Rotax Mini max, Rotax Junior, and Rotax Max (senior). Fabricated Rotax, a brand recognized for its quality and innovation in the karting world, this piston is ideal for demanding drivers looking for reliable and efficient solutions for their karting engines. In addition, Magickart offers this piston at a more competitive price than that of French and Italian competition, allowing you to benefit from the best quality at the best price.
The piston with original band Rotax is an essential component for engines Rotaxdesigned to provide optimal performance and exceptional durability. This piston is suitable for multiple engine models Rotax, including the Rotax Micro max, Rotax Mini max, Rotax Junior, and Rotax Max (senior). Fabricated Rotax, a brand recognized for its quality and innovation in the karting world, this piston is ideal for demanding drivers looking for reliable and efficient solutions for their karting engines. In addition, Magickart offers this piston at a more competitive price than that of French and Italian competition, allowing you to benefit from the best quality at the best price.
The CRG Kt2 is the versatile chassis par excellence of the Italian manufacturer. Unlike the Rébec Road (more rigid), the KT2 uses a frame compound full of tubes of 30 mm in diameter. This architecture offers controlled flexibility, ideal for freeing the engine in categories without gearbox like the OK, Iame X30 or the Rotax Max.
Its geometry allows fast adaptation to all track conditions (high grip or green track "). Featuring the last components of the range CRG RacingHe combines exceptional motor skills at a surgical front train accuracy.
The CRG KT2 2026 Version Kz redefines the standards of the Queen category. While the Road Rebel (32mm) remains the choice for the tracks with very high grip, the KT2 in 30mm Has become the favorite weapon of Kz pilots looking for more agility and ease in the support changes.
For 2026, CRG Reworked the composition of chrome-molybdenum steel to provide a better response from the front train during degressive braking. This KZ version stands out for its localized structural reinforcements and its integral front / rear braking system, essential to stop the power of 50 horsepower engines
The hub of 35 mm long is considered a "short hub". In karting, The choice of hub length is a fundamental adjustment tool:
Short hub (35 mm): It offers less contact surface with the axle than models of 75 or 90 mm. This usually allows to have a "freer" behavior of the rear train, Helping the chassis to be free from curve, Ideal on tracks with a lot of grip (adhesion).
The hub of 40 mm long is often considered the "standard" or "versatile" value on adult karts equipped with a 30 mm (x30, axle, Rotax, Kz, ok). Unlike very long (75-90mm) hubs that considerably rigidify the rear, or the very short (35mm) that fully freed the chassis, the 40 mm Offers neutral and healthy behavior, ideal for starting a setting session before refining.
The hub of 85 mm is a "long" adjustment room. In karting, the choice of the hub length is directly related to the leverage exercised on the axle:
Stability and Grip: With 85 mm, you increase the rigidity of the rear train and removing the load outward. This is the ideal tool for more moving output output or to expand your back path without stacking spacers (which weakens the assembly).
R2.0 version: This name indicates an evolution of design at CRG (best machining, optimized weight and anodized finish "Gold" for higher resistance to corrosion).
The BirelART FreeLine aluminum tie rod is an essential element of the steering , available in different sizes to adjust the geometry of your kart . Made of high-strength aluminum , it offers precision, reliability and safety . Warning: correct installation is essential to avoid any risk on the track.
Product Comments
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent