Summary: The accuracy of the "short" mounting

Why choose the version 28 mm ? This stud is the choice of mechanics looking to optimize the end of the hub or that use rims with a specific veil requiring less clearance.

As original room OTKThis stud ensures optimal thread length to ensure maximum safety holding with your wheel nuts, while avoiding unnecessary overhanglers. CAUTION: A "generic" piece cut off to the saw will never offer you the finish of the original nets, essential not to damage your aluminum hubs during tightening.

🏎️ Why choose the short stud OTK Genuine Parts?

1. Thread safety: The accuracy of machining OTK Avoids "seizure" in the hub. A clean thread is a constant and reliable tightening.

2. Treated steel: This is not a mild steel of hardware. It is designed to withstand the cycles of lateral stress without deforming, ensuring that your wheel always remains perfectly perpendicular to the axis.

3. Square gain (clutter): The 28mm length is optimized for hubs OTK, allowing to mount the wheel nuts while remaining closer to the rim, thus reducing the risk of attachment or shocks on the stud.

💡 Michel's trick

"Attention with short studs: The golden rule is that the wheel nut must be fully screwed on the thread. The trick: With a 28mm stud, check that the thread is exceeding your wheel nut (or arrive at RAS) once tight. If you use 'open' or 'closed' (blinds' wheel nuts, make sure that the depth of the nut does not touch the bottom of the stud before tightening the rim! My Pro Council: Before mounting, a small copper grease on the hub-side stud thread prevents it from being souted with time. It's your best ally to disassemble it easily at the end of the season. "

⚙️ Technical specifications

❓ FAQ SEO (Frequently Asked Questions)

Q: Can I use this short stud if my hub requests a standard stud?

A: No. If your rim is thick, an too short stud will not leave enough for the wheel nut to be secure. Always use the length recommended by your workshop manual OTK.

Q: How do I know if I need the 28mm model or long model?

A: Simply measure the depth of your current wheel nuts. If you have "blind" type nuts (closed), the short stud is often necessary for the nut to support the rim without touching the stud.

✅ Why buy at Magickart?

• Compatibility OTK : We guarantee you the exact factory-mounted piece on the chassis of the group OTK.

Speed: Because we do not fix a hub with a room "approximately" adapted.