CLIPS 3,1X11X1 BIREL

The Circlip Birelart is a critical safety piece for your braking system. Its role is to lock the axis that crosses the brake pads inside the stirrup. Without it, the intense vibrations of karting could slide the axis, resulting in the loss of the pads and a total braking failure.

Made of high quality spring steel, this "wire" circlip has a calibrated voltage to stay lodged in the throat of the axis, even under the most severe constraints encountered in competition.

BirelArt 22SR pump clips

The FREELINE DIAM 22 brake pump complete Birelart - CL is an essential component for Karts, designed and manufactured by Birelart in Italy to provide optimal performance and increased durability. This brake pump is specially adapted for KZ or KF type karts and is compatible with Charles Leclerc, RicCardo, Kubica and LGK Birelart chassis. It is ideal for pilots seeking to improve the performance and reliability of their braking system.

The Revision kit for diameter brake pump 19 mm is a complete set of original repackaging (Original Freeline Racing Parts). It is essential for restoring absolute sealing, hydraulic pressure and reactivity of your rear brake master cylinder or 19 mm.

As shown in detail the reference photo 12856.jpgThis all-in-one kit brings together all the hardware and internal wear parts necessary for professional refurbishment. Rather than replacing a complete master cylinder, this package of factory parts allows you to eliminate pressure losses, liquid leaks at the pedal and the phenomenon of "spongy pedal" that spoil your chronos on the track.

Do not replace the seals one by one if your pump is "spongy". The complete kit allows you to leave on a healthy basis.

• Type content: The kit generally includes the piston, the primary cup, the secondary cup, the O-rings, the maintenance circlips and sometimes the protective bellows.

• When to use it: As soon as you see a loss of constant pressure, an internal leak (the pedal drops gently under pressure), or after a long wintering where the liquid could crystallize.

The Revision Kit for Cylinder 16mrr is a hydraulic reconditioning set of origin manufacturer (Original Freeline / Birel Art). This targeted kit makes it possible to renovate the 16 mm diameter brake pump system (MRR model), usually used on the front braking systems of gearbox karts (Kz) or on some specific rear systems of the group Birel Art.

As highlighted the reference image 13479.jpgThis technical bag precisely contains internal wear parts subject to repeated friction and chemical aggression of the brake fluid. Periodic replacement of these components eliminates internal pressure losses, deleting liquid leaks at the pedal linkage and restoring a firm and accurate attack to your hydraulic system.

The Liquid tank for brake pump 22SR is a spare part of origin manufacturer (Original Freeline / Birel Art). This jar is specially designed to power the master cylinder (brake pump) model 22SR that equips the braking system of the group competition chassis Birel 

In your Birelart brake pump, this ring is the main pivot point between the control lever and the thrust rod. Its function is twofold:

1. Eliminate the game: It allows a "fat" movement without sidebeat. Without it, your brake pedal will have an unpleasant dead race ("blur" effect).

2. Self-lubrication: Generally composed of sintered bronze impregnated with oil, it is designed to operate "dry" or with a minimum of lubricant, thus preventing the premature wear of the steel pivot axis against the aluminum of the lever

The 22SR pump cover fills three critical functions:

1. Protection against contaminants: The brake fluid (dot 4 or 5.1) is hygroscopic (it absorbs the moisture of the air). The lid, associated with its internal membrane, prevents water from polluting the fluid.

2. Level maintaining: It secures the tank against projections during major vibrations of the kart.

3. Management of depression: The internal membrane (often associated with the lid) allows the level of liquid to decrease as the platelet wear without creating a vacuum of air in the tank.

This cap (or bellows) is not just a piece of rubber. He plays a crucial role:

1. Anti-contaminant barrier: It prevents track dust, sand and water to enter the body of the pump.

2. Protection of the axis: If dirt enter here, they mix with fat, creating an abrasive paste that will scratch the piston and destroy your internal seals.

3. Maintaining the lubricant: It keeps the clean fat inside the mechanism of the thrust rod.