Français
English
Deutsch
Espagnol
Italiano
Portuguès
ελληνικά
List of products by brand KG
The KG Power Base is the High performance admission muffler expanded by Kg racing To meet the requirements of the High level kartingas well as in categories OK / OKJ that Kz.
Designed as a real technical performance basis, the Power Base KG offers a stable carburationa Immediate motor response and an Optimal reliabilityeven in the most demanding race conditions.
Fixing kit KG official intended for assembling the kg rear spoiler On karting rear bumper. Designed to ensure solid, reliable fixation and compliant with the requirements of the competition.
Made in Treated and chrome steelThis kit provides excellent resistance to vibrations, shocks and intensive race conditions.
This kit is the technical complement necessary for the installation of plastic elements (Sigma or Omega bumper) on the chassis. The elements present in this kit serve as points of support and guides.
The black plastic rollers provide an interface between the bumper and the chassis, allowing you to absorb the constraints while maintaining the right spacing.
The KG Nitro air box holder is not just a metal tab. This is the interface that absorbs some of the high frequency vibrations generated by the engine before they reach the plastic of the air box. A medium in good condition is crucial: if it is twisted or cracked, your air box will "hang", creating air intakes at the rubber fitting, which can deplete your mix and jeopardize your piston.
The model Kg 509 is one of the most emblematic and most used fairings in competition karting (including OK, KZ and Rotax). The lower part is the part that makes the junction between the front spoiler (bumper) and the upper part of the naser.
Made by KG Italy, world leader in Kart's bodywork, this part is designed with high density polypropylene. It ensures the rigidity of the frontal set while maintaining sufficient flexibility to absorb vibration and light impacts without breaking.
The rubber fitting is the junction part between the output of your air box and the entry of your carburetor. Although apparently simple, this sleeve has a crucial role: it must guarantee a Perfect sealing. The slightest air intake between the air box and the carburettor can result in dust or sand, causing premature wear (or even a motor case) irreparable.
The air boxKG NITROis more than just an admission silencer: it is a real performance tool used on the largest international events. Its aerodynamic design optimizes the flow of air to the carburettor while respecting the highest sound standards. Its silver finish reflects the heat to maintain a cooler intake air.
The KG C3 rear spoiler is the result of the latest research in terms of safety and penetration in the air. Conforming to approval CIK / 23It is designed to provide maximum protection against rear shocks while minimizing turbulence behind wheels.
Its high density polypropylene plastic structure allows it to absorb impacts without breaking, ensuring driver safety and longevity of the bodywork.
This kit is designed specifically for the KG brand omega rear bumper structure. This is the lateral section (the end) which is the most exposed to the tracks on the track. Sold by unit, this kit allows you to replace only the damaged part without having to change the entire rear bodywork.
The central portion of the omega rear bumper is the spine of your rear body. Made by Kg, Impairable reference in Karting bodywork, this part has been drawn to offer the best compromise between energy absorption and structural rigidity.
In competition, this piece is subject to strict controls. That's why she has theFIA homologationensuring that your KART meets the dimensions and safety standards required on all approved circuits.
The central part of the sigma rear bumper is not only an aesthetic support; It's a critical piece of security. Conceived by Kg, world leader in Karting bodywork, this piece ensures the rigidity of the entire rear protection. In case of shock, it is it that distributes the energy on the fasteners of the chassis.
The big advantage of this room is his FIA homologation, essential if you run in federal competitions or championships where the compliance of the equipment is verified.
This kit contains all the metal parts and the hardware needed to properly mount your Sigma rear bumper on your chassis. It is not a simple generic hardware, but specific parts designed by KG to adapt to the geometry of their Sigma model.
IMPORTANT: THIS KIT IS FIA approved (Group 1-2). This means that the use of these original parts is imperative to comply with the technical regulations in official competition and guarantee the good performance of the bumper in the event of shock.
This kit is the "ready to mount" solution to install your Omega rear bumper. It contains all the metal elements and specific hardware needed to attach the assembly (central part + side extensions) on your chassis.
As for all KG body parts, this kit is FIA approved (Group 1-2). In competition, it is not a detail: it is the guarantee that your bodywork will not move during contacts and that you observe the technical standards imposed by the officials.
The spoilerKG MK20is the result of aerodynamic studies carried out in the wind tunnel. Designed by the Italian leaderKGThis model combines optimal air penetration and controlled flexibility to meet the highest safety standards of international karting.
The Front spoiler KG AV 505 CIK / 20 is an aerodynamic element top of the range expanded by Kg racing For competition karting. Designed according to standards CIK / 20This spoiler is approved for use on karting chassis in regulated category. It improves significantly The stability of the front train, the handling and the directional precision.
This spoiler is a robust technical solution for drivers looking for more constant and reactive kart behavior, whether in sprint or endurance.
The Kg c3 is probably one of the most popular spoilers in the karting world. Its aerodynamic design, although classic, remains a safe bet for the competition. In "naked" version (without fixations), it is the ideal spare part for drivers who already have their nose holder and want to simply refresh their body following a race a little too "virile".
It's a room CIK-FIA approvedWhich means that it is perfectly consistent for the official competitions, from the club level at the international level.
Security is no age. TheSpoiler KG OMEGAis the new rear protection reference for kartGroup 3 (Mini 60, Minimum, Cadet). Fully compliant with new regulationsFIA 2026, this model was developed byKGto provide an impassable barrier in the event of a rear collision in the categories of young pilots.
Its enveloping shape and patented fastening system absorb the energy of impact and prevent any fall of another kart, thus drastically reducing the risk of injuries and barrels on the track.
Anticipate the new regulations with theSpoiler KG SIGMA, the latest generation rear protection designed byKG, the Italian leader in the competition bodywork. Meets safety standardsFIA 2026This spoiler is now mandatory for international and national categories (OK, OKJ, OKN, KZ, KZ2).
This original fixing kitKGis designed to firmly hold the lower part of your Nassau panel (front number holder). Made of high-strength steel with a zinc finish, it is compatible with the most common bodies on the market, including models507,508andMK20.
Its adjustable design makes it possible to adjust perfectly the inclination and position of the panel according to your chassis, guaranteeing optimal aerodynamics and a fastening conforming to safety standards.
When the sky covers, your biggest enemy becomes the moisture that seeps into your admission. A motor that sucks water is a motor that "grazes", loses power, or worse, may be able to stall. This transparent protection is designed to perfectly marry the forms of air boxes KG Nitro and Power. It creates a waterproof barrier while leaving the breathe motor, allowing you to maintain stable carburation despite projections.