Français
English
Deutsch
Espagnol
Italiano
Portuguès
ελληνικά
No reward points for this product.
Front train hold 5 mm (for rocket Ø 25 mm) - Origin OTK
The Front train hold of 5 mm is the precision setting tool par excellence for the chassis of the group OTK. It settles on the rocket of 25 mm (Senior standard) between the hub and the eccentric rings.
It is this small ring that will allow you to change the width of your front lane with finesse. In karting, every millimeter counts: switch from a 10 mm hold to a 5 mm hold can release the front train and allow the kart to "rotate" more easily in tight pins.
Technical specifications:
-
Thickness: 5 mm (end adjustment).
-
Inner diameter: Ø 25 mm.
-
Compatibility: Rockets OTK (Tony Kart, Kosmic, wished, Redspeed, LN, EOS).
-
Material: High strength alloy, precision machining.
-
Finish: Quality of origin manufacturer.
🎁 Magickart Fidelity Program: By optimizing your set-up with original parts, you rate loyalty Magickart, usable throughout the site!
💡 The Michel Council (Magickart): the secret of the perfect "set-up"
"The 5 mm hold is the one we use to adjust the behavior of the kart when the track changes between morning and afternoon. My expert advice: If your kart is bordering too hard and the rear jumps (too much front grip), reduce the track width by replacing your holds of 10 by 5 mm.
The essential with your 5 mm holds:
Rockets Ø 25 mm: Check that they are not marked. A ring must slide freely without any radial game.
Front wheel hubs: Clean the inner face of your hub before mounting to ensure perfect flatness.
Setting notebook: Always note if you put the 5 mm hold inside or outside the hub.
A small secret secret: not to lose your holds when changes in fast tires, keep them always arranged in a small magnetic box. At Magickart, it is recommended to have at least four 5 mm holds in its toolbox! "
🛠️ Why choose the original holds OTK ?
-
Parallelism of the faces: Unlike the "cheap" shims, the holds OTK guarantee that your hub is perfectly perpendicular to the rocket.
-
High precision bore: No float on the axis of 25 mm, avoiding braking vibrations.
-
Lightness: A featherweight to not weigh the unspowal masses.
Why choose Magickart for your settings?
-
Tony Kart / Kosmic specialist: We master all the subtleties of the group chassis.
-
Sold by unit: Just replace what you need or build your complete kit.
-
Fast shipment: Prepare your race serenely with our parts in stock.
Need to free your train before gaining fluency? Are you preparing these wedges of 5 mm?
TO 0021.C0
1 Item
Specific References
The Front train hold of 5 mm is the precision setting tool par excellence for the chassis of the group OTK. It settles on the rocket of 25 mm (Senior standard) between the hub and the eccentric rings.
It is this small ring that will allow you to change the width of your front lane with finesse. In karting, every millimeter counts: switch from a 10 mm hold to a 5 mm hold can release the front train and allow the kart to "rotate" more easily in tight pins.